Search results
Create the page "I c-Y" on this wiki! See also the search results found.
- ...the order in which these two firmwares should be updated. When in doubt (i.e. IBM didn't provide specific instructions for your model or a particular 4. Run the HP tool, select the USB device, I used FAT32, create a DOS bootable disk and point at the win98boot folder -29 KB (4,865 words) - 00:12, 27 February 2022
- ...XFree86 4.x is in progress. The driver however doesn't support all cards, i can't say if it supports the supersavage. I had some trouble with X hanging up when switching twice to the terminal and11 KB (1,973 words) - 17:55, 30 August 2008
- In this example, I tell it to invoke the script <tt>~/toggle-touchpad.sh</tt>, which you can c ...mode changes, that there is a GSettings key that also is at play here. As I soon discovered, the GSettings key will actually determine if any changes v13 KB (1,880 words) - 04:30, 29 January 2013
- [[User:Jdthood|I]] installed Ubuntu 11.04 (Natty Narwhal) on a ThinkPad {{X220}}, model 4290 I have since upgraded to Ubuntu 11.10 (Oneiric Ocelot) and have updated some23 KB (3,256 words) - 01:42, 26 March 2020
- I made several attempts to get this card working under x.org, with no success I managed once to get the PCI card alone working after switching the primary4 KB (640 words) - 09:41, 24 October 2006
- At first download the BIOS ISO from the IBM support site. I used following one for my {{R60}}: [http://www-307.ibm.com/pc/support/site. ...aded image: LOGO.MOD, LOGO.SCR ( i've added also LOGO.BMP and LOGO.LOG but i don't think that they are needed ).15 KB (2,321 words) - 19:39, 21 January 2011
- ...mand. The description reads pretty much like what's needed for APS, though I don't want to drop my almost new TP just to field-test it. ...n at rest in normal upright position with base parallel to the ground. As I gently tilt the T42 through all possible x or y angles, the values range fr8 KB (1,264 words) - 17:02, 22 January 2021
- ...lower-power ACPI states (a.k.a. C-states). To eliminate the noise maximum (i.e. lowest power) C-state had to be limited to C2. In {{path|/etc/sysfs.conf ...er instead? Madwifi would not allow me to connect to 5+ wireless networks I had access to. So, if you too have this problem, try ndiswrapper, if not,14 KB (2,010 words) - 16:07, 21 January 2011
- ...ed-notification''': Pidgin plugin to use any LED to indicate new messages. I've forked [http://github.com/Sitwon/led-notification led-notification] to s7 KB (983 words) - 17:05, 22 January 2021
- I tested both, APM and ACPI but settled with ACPI which now works like a char5 KB (814 words) - 22:36, 6 January 2017
- ...e and which Power Management features it supports use the '''-i''' and '''-I''' parameters.3 KB (423 words) - 07:11, 25 May 2006
- ACPI puts the processor into the C3 or C4 power saving states (i.e., the system is idle). ...the two ACPI modules "processor" and "thermal" (depends on the first one). I have no clue, why. Anyone with similar experiences?22 KB (3,464 words) - 04:09, 22 January 2014
- ...ntu 9.04 on a R50p and it allows for the screen to run in 1600x1200, which I could not get the VESA driver to do. I recently experienced this problem; in my case it sometimes also failed to b9 KB (1,597 words) - 17:40, 16 November 2016
- ...y 750P. I leave this page as a starting point for those more intrepid than I. --[[User:Whizkid|Whizkid]] 17:38, 3 Apr 2005 (CEST) ...r are thinking about what these machines can do. Well, they can run Linux. I plan to make mine an SMB file and print server.5 KB (950 words) - 13:20, 20 January 2006
- ...pting for debian, but gentoo's self building all packages caught my eye so i had to try it out for real. ...X server crash on me once. I do however warn against using 2.6.11 kernels, I have had nothing but problems with them.34 KB (5,558 words) - 16:49, 20 October 2006
- ...onfigure the right thresholds. For reference, this is the /etc/tpfand.conf I use for my X200:10 KB (1,551 words) - 18:06, 16 February 2011
- # rename it to something more meaningful (i.e. acpid.conf) and these lines to # The easiest way I have found is to do it via amixer.10 KB (1,527 words) - 16:49, 19 September 2010
- ...ly set the trip temp to 97 degrees, and set battery to the same as AC, and i see good performance AND battery life) * Thinkpad (i) LED is unknown_led2 in thinkpad_acpi3 KB (430 words) - 05:32, 18 May 2020
- Note: I upgraded BIOS to latest version (1.18) but still no luck. OpenGL (DRI?) har2 KB (354 words) - 15:01, 22 January 2021
- *[T] - S for Standard (vs A for Auto for example) - I don't know what this mean :) *[rr] is the first two digits of speed in RPM, i.e. 54 for 5400 RPM.13 KB (1,487 words) - 18:11, 28 June 2016
- On my system (Lucid Lynx), the above line did not work. I changed it to: *I can press the wheel on my external USB mouse and move the mouse up and down26 KB (3,831 words) - 03:59, 11 May 2017
- <!-- I found number 39T7652 along 39T7302 and 39T7303 in a ebay photo - Numeric -- <!-- I found uncertain number 39T3583 along real numbers 39T7481 and 39T7482 in a27 KB (3,724 words) - 17:02, 22 January 2021
- ...Versions will try to disable IRQ #15 and the system will hang during boot. I have had this happen on 2.6.12.1390 and 2.6.12.1398, and the new 2.6.13 ver3 KB (503 words) - 05:18, 14 August 2007
- ...nally "BIOS Update (Non-Diskette)". Save the .exe file somewhere (the one I had was called 1RUJ31US.EXE). For more modern, i.e. Lenovo, Thinkpads, go to [http://www-307.ibm.com/pc/support/site.wss/doc7 KB (1,086 words) - 09:58, 9 January 2008
- #CFLAGS += -I/usr/local/openssl/include #CFLAGS += -I../../hcf -I../../include -I../../include/hcf6 KB (962 words) - 22:32, 7 March 2009
- ...zing NTFS partitions. I have done this before with Knoppix, but this time I used Partition Magic (US$70). ...t not'' be moved. I did move it, and it works fine. Still, in retrospect I agree that the end of the disk is the best place for your Rescue and Recove19 KB (3,242 words) - 21:32, 4 December 2011
- {{cmduser|sudo dpkg -i initng_0.3.3-2_i386.deb}} ====dbus.i====11 KB (1,584 words) - 23:18, 26 August 2007
- *Get current frequencies among other information (-i). :{{cmduser|sudo rovclock -i}}3 KB (378 words) - 18:52, 15 March 2009
- {{HINT|On my debian install I had to "cp libtfmessbsp.so /usr/lib" to avoid a errormessage during "sh ins ...the other for access to the usb files. (This is done for full generality; i.e., you may have other USB devices which you want accessable to other users25 KB (3,909 words) - 16:07, 2 December 2015
- Boot from the Fedora Core 5 CD and enter rescue mode (<i>linux rescue</i>). ...tc/sysconfig/modules/udev-stw.modules and delete <i>parport_pc parport lp</i> (don't forget to chroot into /mnt/sysimage or adjust the path of the edite5 KB (842 words) - 09:53, 25 October 2006
- * Bluetooh (BMDC-2) - Untested (I do see the drivers loaded) * Modem (BMDC-2) - Untested (I do not see drivers loaded)16 KB (2,518 words) - 16:28, 24 October 2006
- ...as possible. That is I didn't want to install a bunch of extra software. I just wanted an 'out of the box' configuration I wanted to use WPA encryption. To get WPA you must use the wpasupplicant mo4 KB (552 words) - 01:46, 15 October 2008
- ===Disabling I/O Ports=== The BIOS (at least version 3.11 on {{X200}}) can also be used to disable I/O ports, like PCMCIA/CardBus. Although this requires a reboot to change se27 KB (4,366 words) - 03:23, 28 October 2015
- A value of -128 (i.e., 0x80 hex) means the sensor is not connected. For example, above the two ...hout software intervention) if its temperature exceeds a given threshold. I'm not sure if it is wired for this, nor whether the Thinkpad changes the th26 KB (3,245 words) - 19:21, 21 May 2015
- (I am Debian user, but instructions are applicable for any distribution) ...org kernel of a later version; I will test both these with Etch again when I have a chance to).8 KB (1,367 words) - 16:42, 22 January 2021
- I wrote this for my own personal use, and thought that it would be a good ide ...nymore (so I can't test the program), I still try to respond to all emails I get.15 KB (2,183 words) - 15:17, 4 November 2020
- ...D versions and several Linuxes). However, during my recent trip to Florida I discovered that this machine is not good for long travels: Immediately after returning home I started looking around and after careful considerations bought [[2373-G1U|t3 KB (511 words) - 01:26, 20 February 2006
- ...old system. As the IBM Rescue and Recovery tool quit with an error message I used the Ubuntu live CD, mounted and cd'ed into my external hard drive and I used Partition Magic, but others have done the following...13 KB (2,123 words) - 10:19, 1 March 2008
- ...l need to buy the screen, which goes under several different part numbers, I'll list them in the next question. Otherwise, no additional hardware is nee IAQX10S is the panel that IBM used in the R50p equipped with this screen. I believe the IAQX10N was used by NEC in the Versa Pro VA20S/AE (way back in11 KB (1,828 words) - 19:12, 29 June 2014
- - int i, t; + int i;2 KB (255 words) - 01:50, 27 July 2006
- ...in comparison, and will save you a LOT of time, frustration, and hassle. I ran down to Microcenter and got the cheapest one, and it works flawlessly. I'm not talking about your Windoze partitions, those are a given. If you're5 KB (778 words) - 23:26, 22 September 2007
- ...st this issue are filed at Fedora and Freedesktop.org (see below). Sadly, I am going to revert to FC4 for the time being.}} I simply inserted the FC5 DVD into the drive and booted into it, and selected9 KB (1,405 words) - 03:43, 10 April 2007
- Most things run just fine after installation, the Rest I got working with the great articles here. ...he NTFS-partition did not work during the Installation of {{OpenSUSE}}, so I shrinked it with QtParted from a Knoppix-DVD.3 KB (534 words) - 18:22, 5 August 2011
- rpm2cpio ../fglrx-kmod-$VER.src.rpm <nowiki>|</nowiki> cpio -i perl -i -pe 'print "#disabled: " if m/BuildRequires: +kernel/' kmodtool2 KB (374 words) - 04:35, 13 April 2007
- run cvs -z3 update -ACPd -I .gitignore -I .git export ACLOCAL="${AC_LOCAL:-aclocal} -I $DEST/share/aclocal"13 KB (1,851 words) - 11:17, 7 November 2007
- ...web about creating a 'nvram' group and adding the users to this group, but I did not do this at the moment. * Modem (but I think it was not recognized in the installation process)2 KB (396 words) - 04:58, 17 February 2009
- Here is how I set up an {{X22}} to allow hot ejection/removal of the UltraBase. See also6 KB (1,014 words) - 02:46, 1 March 2010
- Below a cookbook how I got things working again (after about 8 hours of effort). You need the folo * Deinstall all wlan drivers that you can find. Sometimes I see both a IBM provided application packagen and a Thinkvantage provided pa2 KB (246 words) - 10:18, 11 August 2006
- I used PROBOOT.EXE Version 15.2 (file version 4.0.100.1124) on Bios Version 2 I used an old bootable W98 to start the computer and a second CD with the fil8 KB (1,305 words) - 06:00, 15 August 2019
- ...t. I have left them there because if you copy this script to your system, I would want you to carry these warnings as comments with you. Please read t # system. On a system with 512MB of RAM, I set these parameters both to 448,20 KB (2,935 words) - 13:20, 12 September 2008
- /usr/local/bin/wpa_supplicant -Bw -c/etc/wpa_supplicant.conf -i$DEVICE21 KB (3,442 words) - 16:49, 26 October 2006
- ...ity works, but standby/suspend causes causes the system to hang on resume. I was able to resolve this issue by passing the {{bootparm|acpi_sleep|s3_bios *Modem (YaST can see it and try to configure it, but I have no traditional analog phone line to test it on)4 KB (680 words) - 03:13, 15 July 2007
- '/usr/bin/sudo /usr/sbin/rovclock -i',9 KB (1,142 words) - 05:54, 9 January 2011
- ...old system. As the IBM Rescue and Recovery tool quit with an error message I used the Ubuntu live CD, mounted and cd'ed into my external hard drive and ...the existing NTFS partition. Unfortionately in my case it didn't work. So I booted the Live CD, but gparted and parted refused to resize my Windows, to12 KB (1,992 words) - 17:33, 5 August 2011
- ...reless, as I have a need to create pseudo-"profiles", and in this document I will describe this alternative process. ...cur often in my setup. If someone wants to explore/expound, please do, but I won't include any details about the fingerprint reader in this document.10 KB (1,613 words) - 13:49, 4 September 2008
- ...upplicant. The following is the way that I did it with the ipw3945 driver. I assume that this will work the same on all R60s. sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb13 KB (2,071 words) - 15:45, 6 August 2007
- *You may also have to select initialise (still in the BIOS). I stongly recommend you to do it for maybe sound won't work otherwise. *For 1024x768px on statup, add: (I know, this isn't PCMCIA, but it's done in GRUB config)7 KB (1,202 words) - 17:13, 14 February 2008
- ...ry to make frequent updates until i have a fairly comprehensive guide, but i will especially focus on the issues that took some time (and head scratchin The R60 I am using has the following specifications:9 KB (1,548 words) - 02:20, 19 June 2010
- ...s with the following xorg.conf changes. Use "PCI" in BIOS rather than AGP. I removed all modes apart from 1024x768. ppracer plays well at c. 10fps with ...h Direct Rendering enabled and fix the gdm blank screen issue (see above). I have confirmed this over a few months of trouble free operation with and wi13 KB (2,132 words) - 04:57, 2 July 2008
- ...ith this machine, I started the installation procedure using a USB Stick. I followed these [http://en.opensuse.org/Installation_without_CD#Creating_a_ ...m, Bootloader, and change the boot loader location to its proper location (I recommend the boot or root partition with the Generic MBR option). Now the51 KB (7,507 words) - 11:46, 8 January 2008
- ...d many sections (marked by these ATTENTION banners) are placeholders while I proceed with installation and checkout.}} I simply inserted the FC5 DVD into the drive and booted into it, and selected14 KB (2,137 words) - 02:45, 16 May 2007
- I ([[User:Pberndt|Pberndt]]) wrote a c-daemon which uses the XScreenSaver ext {{cmdroot|dpkg -i brightd_0.1-1_i386.deb}}6 KB (952 words) - 15:53, 30 November 2008
- {{NOTE|I am in no means an expert, the methods described here are those which got ev ...but none seem to address my exact problem. I'll update this article should I find out anything. As for the Bluetooth bug, this is a HAL bug and can only45 KB (7,212 words) - 06:38, 29 August 2007
- * Reduce the size of NTFS partition. I used (Paragon Partition Manager http://www.partition-manager.com) * (optional) I made 3 partitions. [(boot 500mb)(swap 1500mb)(8000mb)]2 KB (304 words) - 18:10, 3 March 2007
- # other licenses to use (BSD, GPL v3, Public Domain, etc.), I'm open :)7 KB (938 words) - 14:57, 1 June 2007
- For Fn - Arrow-keys I have customized my {{path|~/.xmodmap}}: {{cmdroot| dpkg -i linux-image-2.6.18_thinkpad.1.0_i386.deb }}20 KB (2,390 words) - 18:01, 14 September 2007
- I just installed Feisty using the graphical installer. {{WARN|Installing grub ...vated, the restricted ati alternative fglrx was installed but not enabled. I did not try it.19 KB (3,033 words) - 17:32, 5 August 2011
- ...0/brightness = 25), no radios, idle, powertop suggestions followed, unused I/O ports disabled in BIOS||7.2W11 KB (1,442 words) - 14:42, 29 March 2011
- ...on my T61; however, using the latest HG/Mercurial makes everything work. I created a Debian package for unstable/sid with the HG alsa that works for m ...tp://www.klabs.be/~fpiat/linux/debian/Lenny_on_Thinkpad_T61/#Sound script] I wrote to patch and build an alsa module package (with module-assistant). --6 KB (916 words) - 15:26, 15 November 2020
- ...d T42. This is a work-in-progress, so check the history page for mistakes I made (if you are that type). These sections follow in the order I installed them, with some of the later customizations do-able while the ker11 KB (1,728 words) - 19:14, 26 June 2007
- # due to drive problems. I'd prefer to power it down, but it # $ACTION is the battery i.e. BAT07 KB (987 words) - 00:51, 19 January 2009
- ...th opensource drivers only, at the end of the default Ubuntu installation. I've no problem with fan noises either. ...odels use atheros for wifi, or tg3 for ethernet (but not mine). That's why I opted for this one (beside the 1.2 Kg ultraportable form factor).18 KB (2,821 words) - 16:46, 5 August 2011
- Finally after awaiting for about less than 2 months, I got my T61 from Lenovo yesterday. Well, my first impression is worth wait. === What did I do the first minute ===9 KB (1,330 words) - 17:36, 3 July 2007
- sed "s/cursor/Cursor/" -i rotate sed "s/stylus/Stylus/" -i rotate9 KB (1,322 words) - 16:08, 10 May 2008
- ...might be superfluous. Please edit, if some of the steps are unneccessary. I expect Gutsy Gibbon installs to be much smoother, when the system comes out ...will have to upgrade to the 2.6.22 kernel to get all the drivers to work. I would advise using Gutsy, as it makes everything easier to set up (with dri15 KB (2,417 words) - 18:49, 28 August 2012
- This is a quick overview of how I installed Fedora 8 on my ThinkPad T60. I mostly just copy and pasted what TomCallaway wrote in his installation guid This is a single system install. I just put in the DVD told the installation to erase everything and it did! W8 KB (1,209 words) - 08:41, 7 March 2008
- ...m being complete; unfortunately it will stay that way since [[User:TpUser0|I]] no longer use this ThinkPad. Sorry. [[User:TpUser0|TpUser0]] ([[User talk This page shows some parts of how I did once install Gentoo Linux on my ThinkPad. Since the R51 is now quite ou19 KB (2,909 words) - 19:36, 18 May 2015
- ...er above, here are the specs (I've left out modem, infrared, cardbus since I haven't ever used them): ==Before I begin==75 KB (12,480 words) - 17:49, 5 August 2011
- I recommend using alsa-drivers 1.0.16, as there is a new master mixer, I have no express slot cards available for testing.23 KB (3,497 words) - 14:32, 20 February 2010
- ...until you see the section listed below and replace <i>nv</i> with <i>vesa</i> on the driver line: I run my T61p in both a KVM (docked) and a solo environment. I found the only way to get the displays to work properly in both was to set17 KB (2,725 words) - 18:36, 13 January 2010
- Restart X server at this point (i.e. logout and login). # I recommend to replace these prior two statements, since otherwise with xran31 KB (3,978 words) - 16:17, 21 May 2013
- ...dified such that a BIOS update is possible -- without loading any drivers. I ([[User:Joachim_Selke|Joachim Selke]]) successfully updated my Thinkpad {{X ...an USB driver, create RAM disk and copy the files to the RAM disk" below. I developed a new approach to solve this problem and will describe it here.45 KB (7,622 words) - 19:32, 4 May 2017
- I got my Thinkpad T61 November 7. Fedora 8 was released on November 8. Soun I also want to give special thanks for the [http://carrot.hep.upenn.edu/wiki/17 KB (2,451 words) - 13:22, 22 July 2009
- ...success, and hopefully more tweaks to come to get it as good as it can be. I have a 750P but the steps here apply to any 750 series machine. If we ever ...one partition for Debian Woody, a small swap partition and one for Ubuntu. I'll be using Ubuntu Dapper Drake, since it's the latest LTS (long term suppo10 KB (1,785 words) - 15:49, 24 December 2007
- ...roject.org/get-fedora Fedora 8]. I did not have access to DVD a burner so I used a USB HDD and flash key for the install. ...external HDD. Wipe the MBR of the usb key via the following command. '''(I'm assuming your key is /dev/sdc)'''14 KB (2,345 words) - 23:19, 6 March 2009
- This article describes how I was able to load CentOS 5 on my Lenovo Thinkpad T60. * Infrared ( I do not use it, but the drivers load)16 KB (2,567 words) - 14:22, 3 June 2008
- With this I was able to Install Windows XP (SP3) with Office 2003 (SP2), IE7, WMP 11, S15 KB (2,452 words) - 05:05, 15 November 2014
- for i in range(c):4 KB (601 words) - 15:52, 30 November 2008
- I installed Network Manager too. Check http://wiki.archlinux.org/index.php/Ne4 KB (484 words) - 23:59, 24 March 2008
- Enabling APIC mode: Flat. Using 1 I/O APICs CPU: L1 I cache: 32K, L1 D cache: 24K36 KB (4,929 words) - 12:17, 10 January 2009
- of the features. I manually upgraded it to 2.6.25. The .config can be found ...a fresh driver snapshot from http://wireless.kernel.org/en/users/Download (I used compat-wireless-2008-04-25).13 KB (1,865 words) - 17:40, 5 August 2011
- The Wifi LED did not illuminate until I did the following: It's best to use the default ubuntu kernels (i.e. NOT MarcoBazzani's patched kernel binaries!) unless you12 KB (1,920 words) - 03:04, 17 August 2010
- {{cmdroot|dpkg -i /usr/src/linux-image-2.6.27.mykernel_2.6.27.mykernel-10.00.Custom_amd64.deb {{cmdroot|dpkg -i /usr/src/linux-image-2.6.27.mykernel_2.6.27.mykernel-10.00.Custom_i386.deb}9 KB (1,351 words) - 09:34, 14 October 2008
- {{WARN|Currently suspend and resume works only once. I don't know whether it depends on the operation system or on Gnome powermana ...s describe how I was able to get everything to work. These are only hints. I am not responsible for any damages which were caused through these settings37 KB (5,808 words) - 08:28, 23 January 2010
- I have followed the following steps to do the installation in the SL400 (2743 ...essages which does not allow me to connect to my home wireless connection. I have made the following:5 KB (684 words) - 19:05, 19 February 2009
- ...installer from Vista. To get the menu visible in the Vista version I used I had to type this into a priviliged cmd.exe: ...find the "\g2lbr.mbr" file, or that it might be corrupt. Before giving up I tried changing this path. This can be done by issuing:13 KB (2,004 words) - 17:39, 18 April 2009
- ...mode is by default disabled in ubuntu (for some historical weird hang up, I guess). To enable it, edit the file: sudo hdparm -I /dev/sda | grep -i "power mana"30 KB (4,536 words) - 05:59, 7 May 2009
- ...e issues like terminal output not updating in some very weird cases (which I did not see in v173, this seems to have something to do with powermizer as ...improved in version 177 of the NVidia driver. To workaround this problem, I made a couple of shell scripts which keep the GPU at its highest speed whil20 KB (3,084 words) - 17:42, 5 August 2011
- ...XTERNAL''' display (I.E. the ATI/AMD graphics card) or the '''INTERNAL''' (I.E. the on board Intel graphics) ** I've only tested with SD & SDHC (as that's all I have at the moment) but they work fine. The system very quickly recognizes11 KB (1,729 words) - 03:53, 17 July 2010
- {{Todo|Not fnished yet. I'm documenting the installation process as it goes}} I downloaded the FTP installation CD on http://www.archlinux.org/5 KB (736 words) - 23:04, 3 July 2010
