Qualcomm Gobi 2000
- ThinkPad AT&T® Gobi 2000 Broadband Option 78Y1398
- ThinkPad Gobi 2000 Broadband Option 78Y1399
The firmware for this device is not publicly downloadable and currently must be obtained from a windows installation. The firmware consists of 3 parts:
- amss.mbn (firmware stage 1)
- apps.mbn (firmware stage 2)
- UQCN.mbn (formware stage 3) - includes configuration and carrier specific settings)
Default location for the firmware can be found in the following directory:
- C:\Program Files (x86)\QUALCOMM\Images\Lenovo
MD5 SUM of known firmware files:
- 84d002b0ef003cde6c95826bfbf067fe /lib/firmware/gobi/amss.mbn (STAGE 1, tested with UK T510, O2 SIM)
- d7496085f1af3d1bfdf0fa60c3222766 /lib/firmware/gobi/apps.mbn (STAGE 2, tested with UK T510, O2 SIM)
- 1aa5727b034dd1f371a3412d5800c1a3 /lib/firmware/gobi/UQCN.mbn (STAGE 3, UMTS unlocked, tested with UK T510, O2 SIM)
I am experimenting on an alternative way, described on the discussion page. Sebi 15:08, 15 March 2010 (UTC)
The method you describe on the talk page is in fact the same method I used to obtain these files mentioned above. We should complete the table on the talk page with information and MD5 sums for all 12 firmware options, and place it on this page, along with instructions for both methods to obtain the files. Catphish
I can confirm that the method works from the discussion page --Aneiser 16:22, 18 August 2010 (UTC)
The firmware for this device must be loaded prior to using the device. The firmware loading interface is exposed over USB as id 05c6:9204 which can be accessed as a character (TTYUSB) device under Linux using the qcserial driver (modified to include correct USB IDs). The firmware can be loaded using the gobi_loader application .
After firmware is loaded, the modem is exposed over USB as id 05c6:9205 which can be accessed as a character (TTYUSB) device under Linux using the qcserial (modified to include correct USB IDs). Normal dial-up software can be used to create a 3G connection.
With a small kernel patch (submitted upstream: http://marc.info/?l=linux-kernel&m=128534473802312&w=2) two additional serial ports are available: Diagnostics Monitor and NMEA GPS. The three serial ports are:
# /dev/ttyUSB0 -> Diagnostics # /dev/ttyUSB1 -> 3G Modem # /dev/ttyUSB2 -> NMEA GPS port
If you have another serial USB device activated before the Gobi the ttyUSB-numbers will certainly change.
The Diagnostics Monitor uses Qualcomm's DM protocol; I used libqcdm (ModemManager) to talk to it, found it working, but at least DM commands 12 and 64 are not implemented on my device (Thinkpad x100e).
The GPS port and how to enable it has been confirmed now in the Gobi 3000 source code at: https://www.codeaurora.org/patches/quic/gobi/ Enable/disable GPS with:
echo "\$GPS_START" > /dev/ttyUSB2 # use GPS echo "\$GPS_STOP" > /dev/ttyUSB2
Carrier specific configurations
Each device is intended to be used with a specific carrier, and is shipped with firmware to support that carrier. Notebooks are often also shipped with a pre-installed SIM. Other carriers may work by loading a different firmware version. The 'generic UMTS' stage 3 firmware is known to with with O2, an unsupported UK carrier. See above for a list of known firmware files.
ThinkPads this device may be found in
AT&T service contract may be required
Verizon service contract may be required
Gobi 2000 WWAN upgradable