Serial Ultrabay Slim HDD Adapter II

From ThinkWiki
Revision as of 15:39, 10 July 2020 by Bugmenot2 (Talk | contribs) (reorganized page layout)
Jump to: navigation, search

Serial Ultrabay Slim HDD Adapter II

This is an adapter that slides into a Serial Ultrabay Slim.


  • One SATA slot for a 2.5-inch, 7 or 9.5-millimeter HDD/SSD/SSHD
  • Weight: 91 grams or 0.2 pounds


  1. This HDD adapter requires a caddy tray/bracket to be screwed onto the 2.5-inch storage drive, however if that is not possible, the screws can be used instead of the caddy tray/bracket.

UltraBay Slim SATA HDD Adapter.gif

Part numbers

Branded as the ThinkPad Serial ATA Hard Drive Bay Adapter III

  • 43N3412, 43N3429, 43N3428

Branded as the ThinkPad 9.5mm Serial ATA Hard Drive Bay Adapter III

  • 43N3412, 43N3415, 43N3414

Advice for 3rd party clones

Certain clones are built in such a way that they unintentionally create a poor connection to the Ultrabay's connector, which can be seen here:
Avoid these clones, as the chance of the adapter making contact with the Ultrabay will be very low.
If possible, try to find clones such as this adapter, as pictured above. This ensures a reliable connection as the contact with the Ultrabay is not blocked by any additional plastic.

Linux support

If connected at boot time, the drive is normally /dev/sdb.

Models supporting this accessory