Difference between revisions of "SMAPI support for Linux"
(cosmetics) |
(→Installation) |
||
Line 28: | Line 28: | ||
:{{cmdroot|1=make load HDAPS=1}} | :{{cmdroot|1=make load HDAPS=1}} | ||
or | or | ||
− | :{cmdroot|1=make install HDAPS=1}} | + | :{{cmdroot|1=make install HDAPS=1}} |
Revision as of 13:41, 3 January 2006
ThinkPad laptops include a proprietary interface called SMAPI BIOS (System Management Application Program Interface) which provides some hardware control functionality that is not exposed by any other interface (e.g., ACPI).
The SMAPI interfaces has mutated between models and is poorly documented, so Linux support is not exhaustive for most models. There are currently two SMAPI access mechanisms available:
- thinkpad and tpctl for older ThinkPads and
- tp_smapi for newer ones.
Contents
Using the tp_smapi module
The tp_smapi kernel module exposes some features of the SMAPI BIOS found on recent ThinkPads via a sysfs interface. Currently, the implemented functionality is control of battery charging, extended battery status and control of CD/DVD speed (disabled by default).
- Project page: http://tpctl.sourceforge.net/
- You need to download only the tp_smapi kernel module.
Installation
For testing, you can simply compile and load the driver within the current working directory:
# tar xzvf tp_smapi-0.13.tgz
# cd tp_smapi-0.13
# make load
To compile and install into the kernel's module path:
# make install
If you use the HDAPS driver, use these instead to replace the hdaps module with one patched for compatibility with tp_smapi (kernel source tree needed):
# make load HDAPS=1
or
# make install HDAPS=1
To prepare a stand-alone patch against the current kernel tree (including
a compatibility fixes to hdaps and Kconfig entries):
# make patch
To delete all autogenerated files:
# make clean
The original kernel tree is never modified by any these commands.
The /lib/modules directory is modified only by # make install
.
Battery charge control features
To set the thresholds for starting and stopping battery charging (in percent of current full charge capacity):
# echo 40 > /sys/devices/platform/smapi/BAT0/start_charge_thresh
# echo 70 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh
# cat /sys/devices/platform/smapi/BAT0/*_charge_thresh
40
70
To unconditionally inhibit charging for 17 minutes:
# echo 17 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes
To cancel charge inhibiting:
# echo 0 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes
To force battery discharging even if connected to AC, use one of these:
# echo 1 > /sys/devices/platform/smapi/BAT0/force_discharge1
# echo 1 > /sys/devices/platform/smapi/BAT0/force_discharge2
(Probably only one of these will work on your laptop; please check the dmesg output to see which one, and update the status below.)
To cancel forced disharge, use one of these:
# echo 0 > /sys/devices/platform/smapi/BAT0/force_discharge1
# echo 0 > /sys/devices/platform/smapi/BAT0/force_discharge2
Battery status features
To view exteded battery status such as charging state, voltage, current, capacity, cycle count and model information:
# cat /sys/devices/platform/smapi/BAT0/installed # cat /sys/devices/platform/smapi/BAT0/state # idle/charging/discharging # cat /sys/devices/platform/smapi/BAT0/cycle_count # cat /sys/devices/platform/smapi/BAT0/current_now # instantaneous current # cat /sys/devices/platform/smapi/BAT0/current_avg # last minute average # cat /sys/devices/platform/smapi/BAT0/power_now # instantaneous power # cat /sys/devices/platform/smapi/BAT0/power_avg # last minute average # cat /sys/devices/platform/smapi/BAT0/last_full_capacity # cat /sys/devices/platform/smapi/BAT0/remaining_capacity # cat /sys/devices/platform/smapi/BAT0/design_capacity # cat /sys/devices/platform/smapi/BAT0/voltage # cat /sys/devices/platform/smapi/BAT0/design_voltage # cat /sys/devices/platform/smapi/BAT0/manufacturer # cat /sys/devices/platform/smapi/BAT0/model # cat /sys/devices/platform/smapi/BAT0/serial # cat /sys/devices/platform/smapi/BAT0/barcoding # cat /sys/devices/platform/smapi/BAT0/chemistry # cat /sys/devices/platform/smapi/ac_connected
The raw status data is also available, including some fields not in the above (in case you can figure them out):
# cat /sys/devices/platform/smapi/BAT0/dump
In all of the above, replace BAT0 with BAT1 to address the 2nd battery.
Note that the battery status readout conflicts with the stock hdaps driver, so if you use hdaps you will need to load tp_smapi using # make load HDAPS=1
. See below.
Optical drive control features
To control the speed of the optical drive:
# echo 0 yes_crash_my_computer > /sys/devices/platform/smapi/cd_speed # slow
# echo 1 yes_crash_my_computer > /sys/devices/platform/smapi/cd_speed # medium
# echo 2 yes_crash_my_computer > /sys/devices/platform/smapi/cd_speed # fast
# cat /sys/devices/platform/smapi/cd_speed
Other features
Other things that can be controlled through SMAPI, but are not supported in this version of the driver, include forcing battery discharge, PCI bus power saving, CPU power saving control and fan control. See the included README file for more information.
Conflict with hdaps
The extended battery status function conflicts with the hdaps kernel module (they use the same IO ports).
You can use HDAPS=1 (see Installation) to get a patched version of hdaps which is compatible with tp_smapi.
Otherwise:
If you load hdaps first, tp_smapi will disable its battery status functions (and log a message in the kernel log). If you load tp_smapi first, hdaps will refuse to load. To switch between the two, rmmod both and then load one you need.
Some of the battery status is also visible through ACPI (/proc/acpi/battery/*).
The charging control files (*_charge_thresh, inhibit_charge_minutes and force_discharge*) don't have this problem.
Model-specific status
× | start_charge_ thresh |
stop_charge_ thresh |
inhbit_charge_ minutes |
cd_speed (see note above) |
force_ discharge1 |
force_ discharge2 |
battery status files (see note about hdaps above) |
---|---|---|---|---|---|---|---|
G41 | yes | no | yes | yes | unknown | unknown | unknown |
R40 | no | no | no | yes | unknown | unknown | unknown |
R50p | no | no | no | yes | no | no | yes |
R51 | yes | no | yes | unknown | unknown | unknown | yes |
R52 | yes | yes | yes | yes | unknown | unknown | unknown |
T40 | no | no | no | yes | unknown | unknown | yes |
T40p | no | no | no | yes | no | no | yes |
T41 | no | no | no | yes | no | no | yes |
T41p | no | no | no | yes | unknown | unknown | unknown |
T42 | yes | no | yes | yes | yes | no | yes |
T42p | yes | no | yes | unknown | unknown | unknown | unknown |
T43 | yes | yes | yes | yes | yes | no | yes |
T43p | yes | yes | yes | yes | yes | no | yes |
X24 | no | no | no | unknown | unknown | unknown | yes |
X31 | no | no | no | unknown | unknown | unknown | yes |
X32 | no | no | no | unknown | unknown | unknown | unknown |
X40 | yes | no | yes | unknown | unknown | unknown | yes |
X41 | yes | yes | yes | unknown | unknown | unknown | unknown |
Please update the above and report your experience on the discussion page. If the module loads but gives a "not supported" or "not implementeded" when you try to use some specific file in /sys/devices/platform/smapi/, please report the dmesg output and whether the corresponding functionality is available under Windows - maybe your ThinkPad just can't do that.
Using the thinkpad module
This solution consists of a module, called thinkpad, and a user-space tool caled tpctl. It provides very rich functionality for older ThinkPads, but on newer ThinkPads much of this functionality is exposed and supported through an ACPI interface and the SMAPI access does not work anymore. Kernel 2.6.9 and newer is unsupported; for kernel 2.6.3 and newer you need tpctl >=4.14 and thinkpad >=5.5. For details, see the README and list of supported models.
- Project page: http://tpctl.sourceforge.net/
- You need to download the thinkpad module and tpctl userspace tool.
- There is also an optional GUI: configure-thinkpad.