Difference between revisions of "How to control fan speed"
(→Hardware specs: X61s WWAN has second fan) |
(→Fan Tachometer: added part on 65335 error.) |
||
(44 intermediate revisions by 30 users not shown) | |||
Line 1: | Line 1: | ||
This page discusses methods for controlling the system fan. | This page discusses methods for controlling the system fan. | ||
+ | |||
+ | {| width="100%" columns="2" | ||
+ | |style="vertical-align:top;white-space:nowrap;" | __TOC__ | ||
+ | |style="vertical-align:top" | | ||
+ | |||
+ | {{WARN|When designing fan-control applets, never ignore a valid thermal sensor. | ||
+ | |||
+ | Even if it seems to be stuck at a certain temperature, you must take that sensor into account. While it will probably make the fan spin faster than if the sensor was ignored, that's exactly what would happen when the fan is under EC control, and could very well be the reason for the "stuck" value in the first place. | ||
+ | |||
+ | Always play it safe. If a battery pack seems to want the fan to always run faster, the only safe thing to do is to make it run faster.}} | ||
+ | |} | ||
==For Linux== | ==For Linux== | ||
− | |||
− | |||
− | |||
− | |||
− | + | {{NOTE|Fan control operations are disabled by default for safety reasons.}} | |
− | + | To enable fan control, the module parameter <tt>fan_control=1</tt> must be given to thinkpad-acpi. | |
− | + | For example, in Ubuntu 8.04 (Hardy Heron), add the following to {{path|/etc/modprobe.d/options}}: <tt>options thinkpad_acpi fan_control=1</tt> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | = | + | For Debian Squeeze (testing) create {{path|/etc/modprobe.d/thinkpad_acpi.conf}} with: <tt>options thinkpad_acpi fan_control=1</tt> and install the package <tt>thinkfan</tt> |
− | + | Having done so, reboot and you can use the following commands to control fan speed: | |
− | + | {{cmdroot|echo level 0 > /proc/acpi/ibm/fan}} (fan off) | |
− | {{cmdroot|echo | + | {{cmdroot|echo level 2 > /proc/acpi/ibm/fan}} (low speed) |
− | {{cmdroot|echo | + | {{cmdroot|echo level 4 > /proc/acpi/ibm/fan}} (medium speed) |
− | {{cmdroot|echo | + | {{cmdroot|echo level 7 > /proc/acpi/ibm/fan}} (maximum speed) |
− | {{cmdroot|echo | + | {{cmdroot|echo level auto > /proc/acpi/ibm/fan}} (automatic - default) |
− | {{cmdroot|echo | + | {{cmdroot|echo level disengaged > /proc/acpi/ibm/fan}} (disengaged) |
− | + | If you receive a PERMISSION DENIED error you can use the following command syntax instead as a work-around: | |
− | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level 0 | sudo tee /proc/acpi/ibm/fan</code> (fan off) | |
− | = | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level 2 | sudo tee /proc/acpi/ibm/fan</code> (low speed) |
− | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level 4 | sudo tee /proc/acpi/ibm/fan</code> (medium speed) | |
− | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level 7 | sudo tee /proc/acpi/ibm/fan</code> (maximum speed) | |
− | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level auto | sudo tee /proc/acpi/ibm/fan</code> (automatic - default) | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | <code style="white-space:nowrap;color:#495988;background-color:white;"><nowiki>#</nowiki> echo level disengaged | sudo tee /proc/acpi/ibm/fan</code> (disengaged) | |
===Automated control scripts=== | ===Automated control scripts=== | ||
Line 72: | Line 55: | ||
{{cmdroot|./tp-fancontrol}} | {{cmdroot|./tp-fancontrol}} | ||
− | There is an distro independent daemon (http:// | + | There is an distro independent daemon (http://launchpad.net/tp-fan/tpfand/0.94/+download/tpfand-0.94.tar.gz), written in python. Packages are available for debian based linux systems. |
[http://www.gambitchess.org/moin.py/ThinkPad_Fan_Control A GTK GUI program (packaged for Ubuntu 7.10 and 8.04)] may also help. | [http://www.gambitchess.org/moin.py/ThinkPad_Fan_Control A GTK GUI program (packaged for Ubuntu 7.10 and 8.04)] may also help. | ||
+ | |||
+ | ===Automated program - Simple ThinkPad Fan Control=== | ||
+ | |||
+ | '''[https://github.com/Stanko/ThinkPad-Fan-Control GitHub Page]''' | ||
+ | |||
+ | This is program for controlling fans speed on IBM/Lenovo ThinkPads. It is written | ||
+ | for Linux only. This program is written in C, using GTK GUI. | ||
+ | |||
+ | You are required to have the Linux kernel with 'thinkpad-acpi' patch. | ||
+ | You must also enable manual control for your fans. For Linux 2.6.22 and above, | ||
+ | you must add 'fan_control=1' as a module parameter to 'thinkpad-acpi'. | ||
+ | For example, in Debian Lenny (and Ubuntu 8.04), you must add the following | ||
+ | to "/etc/modprobe.d/options": | ||
+ | options thinkpad_acpi fan_control=1 | ||
+ | |||
+ | Having done so, reboot. Now you'll be able to use this program easily. | ||
+ | |||
+ | Here is screenshot: | ||
+ | [[Image:Tpfc.png|none]] | ||
+ | |||
+ | and direct download (src + i386 32bit binary). Please read README.txt file | ||
+ | included in package. | ||
+ | |||
+ | '''Download links''' | ||
+ | |||
+ | '''[https://github.com/Stanko/ThinkPad-Fan-Control GitHub Page]''' | ||
+ | |||
+ | |||
+ | '''Direct download:''' | ||
+ | |||
+ | [[http://www.box.net/shared/phz3foll8oe0501k8s1j tpfc0.5.tar.gz]] | ||
+ | |||
+ | |||
+ | ---- | ||
+ | |||
+ | I wrote this for my own personal use, and thought that it would be a good idea | ||
+ | to release it to the world, and hope that it will be useful to someone! | ||
+ | Feel free to send comments, bug reports or a thanks to the e-mail above. Although I don't use ThinkPad anymore (so I can't test the program), I still try to respond to all emails I get. | ||
==For Windows== | ==For Windows== | ||
Line 84: | Line 105: | ||
The following hardware behavior was discovered experimentally by [[User:Thinker|Thinker]] and neither provided by nor confirmed by IBM/Lenovo. The following description may be inaccurate and may vary by model (see list of models above). The terminology probably does not match the one used by IBM/Lenovo engineers. | The following hardware behavior was discovered experimentally by [[User:Thinker|Thinker]] and neither provided by nor confirmed by IBM/Lenovo. The following description may be inaccurate and may vary by model (see list of models above). The terminology probably does not match the one used by IBM/Lenovo engineers. | ||
− | {{NOTE|Information on other models is included in the [[ | + | {{NOTE|Information on other models is included in the [[thinkpad-acpi]] [[Git]] version.}} |
− | {{NOTE|1=The ThinkPad {{X61s}} with WWAN | + | {{NOTE|1=The ThinkPad {{X61s}} and {{X61}} with WWAN have a [http://forum.notebookreview.com/showthread.php?t=141931 second system fan]. It shares the same control register as the main fan (cannot be controlled separately), and exposes a second tachometer.}} |
ACPI DSDT register HFSP (8 bits, offset 0x2F in the <tt>EmbeddedController</tt> address space, accessed through the standard EC interface at IO ports 0x62 and 0x66) is read/writable and has the following meaning: | ACPI DSDT register HFSP (8 bits, offset 0x2F in the <tt>EmbeddedController</tt> address space, accessed through the standard EC interface at IO ports 0x62 and 0x66) is read/writable and has the following meaning: | ||
Line 98: | Line 119: | ||
After boot, the HFSP register may not reflect the true state of the EC (on some models it reads 0x07 even though the EC is actually in automatic mode). | After boot, the HFSP register may not reflect the true state of the EC (on some models it reads 0x07 even though the EC is actually in automatic mode). | ||
+ | |||
+ | The HFSP register controls both fans at the same time in the X61/X61s. | ||
=== Fan Tachometer === | === Fan Tachometer === | ||
The embedded controller registers 0x84 (LSB), 0x85 (MSB) are the main fan tachometer, and report fan speed in RPM in everything since the {{A31}} and maybe a little earlier. Not much is know about the tachometer in earlier models, or even whether they had one or not. | The embedded controller registers 0x84 (LSB), 0x85 (MSB) are the main fan tachometer, and report fan speed in RPM in everything since the {{A31}} and maybe a little earlier. Not much is know about the tachometer in earlier models, or even whether they had one or not. | ||
+ | |||
+ | On the X61/X61s, one must select through EC register 0x31 bit 0 which fan the tachometer registers will expose (Firmware 7M). Beware: this is the same register used for brightness control in other models. | ||
+ | |||
+ | If the speed reported is 65335, then is typically due to a broken fan assembly. | ||
+ | The fan might still be rotating. | ||
+ | This error can be intermittent and can prevent booting (Error 'Fan error') | ||
=== Automatic mode === | === Automatic mode === | ||
Line 120: | Line 149: | ||
For some reason, the embedded controller may stop updating the tachometer registers while entering or exiting disengaged mode in some ThinkPad firmware versions (hence the EC tachometer registers will not be updated on these models while entering/exiting disengaged mode). Once it arrives at maximum speed, or once it gets back at closed-loop cruise speed, the embedded controller starts updating the tachometer registers again. Later T models such as the {{T43}} have this problem, while the {{A31}} does not. | For some reason, the embedded controller may stop updating the tachometer registers while entering or exiting disengaged mode in some ThinkPad firmware versions (hence the EC tachometer registers will not be updated on these models while entering/exiting disengaged mode). Once it arrives at maximum speed, or once it gets back at closed-loop cruise speed, the embedded controller starts updating the tachometer registers again. Later T models such as the {{T43}} have this problem, while the {{A31}} does not. | ||
− | {{HINT|Apparently the [[Problem with fan noise|pulsing fan noise]] experienced by some users can be cured by repeatedly running 2-4 seconds of manual control followed by 0.5-1 seconds of disengaged mode. The pulse occurs when the the embedded controller computes the fan speed and adjusts the fan voltage adaptively every few seconds (~4.8sec for the ThinkPad T43); the aforementioned mode switching doesn't give it a chance to do so. | + | {{HINT|Apparently the [[Problem with fan noise|pulsing fan noise]] experienced by some users can be cured by repeatedly running 2-4 seconds of manual control followed by 0.5-1 seconds of disengaged mode. The pulse occurs when the the embedded controller computes the fan speed and adjusts the fan voltage adaptively every few seconds (~4.8sec for the ThinkPad T43); the aforementioned mode switching doesn't give it a chance to do so. Some of the [[ACPI fan control script#Variable speed control scripts|ACPI fan control scripts]] implements this solution.}} |
+ | |||
+ | {{HINT|To force engaged mode using [http://www.staff.uni-marburg.de/~schmitzr/donate.html TPFanControl] for Windows, enter '64' as the value (0-7) for manual mode. This can also be incorporated into smart mode through a custom tpfancontrol.ini}} | ||
==Supported models== | ==Supported models== | ||
Line 126: | Line 157: | ||
The above was successfully tested on the following models: | The above was successfully tested on the following models: | ||
− | * ThinkPad {{A31}} (fan levels RPM: 0 = off, 1-2 = ~3280-3380 (!), 3-5 = ~3200, 6-7 = ~3380, "disengaged" = ~4000 (see NOTE above)) | + | * ThinkPad {{A31}}, {{A31p}} (fan levels RPM: 0 = off, 1-2 = ~3280-3380 (!), 3-5 = ~3200, 6-7 = ~3380, "disengaged" = ~4000 (see NOTE above)) |
* ThinkPad {{R50}} (highest manual level is 3; disengage mode works and reaches much higher RPM) | * ThinkPad {{R50}} (highest manual level is 3; disengage mode works and reaches much higher RPM) | ||
* ThinkPad {{R50p}} (fan levels RPM: 0 = off, 1-2 = ~3200, 3-5 = ~3500-3600, 6-7 = ~3700-3800, disengaged = ~5300) | * ThinkPad {{R50p}} (fan levels RPM: 0 = off, 1-2 = ~3200, 3-5 = ~3500-3600, 6-7 = ~3700-3800, disengaged = ~5300) | ||
Line 134: | Line 165: | ||
* ThinkPad {{R60}} (fan levels RPM: 0 = off, 1-1 = ~2650, 3-5 = ~3300, 6-7 = ~3950, disengaged = ~4800) | * ThinkPad {{R60}} (fan levels RPM: 0 = off, 1-1 = ~2650, 3-5 = ~3300, 6-7 = ~3950, disengaged = ~4800) | ||
* ThinkPad {{R60e}} | * ThinkPad {{R60e}} | ||
+ | * ThinkPad {{R61i}} (fan levels RPM: 0 = off, 1 = 2689, 2 = 2729, 3 = 3059, 4 = 3047, 5 = 3051, 6 = 3515, 7 = 3468, full-speed/disengaged = 4119~4200)mod.#7650-D7G@+/-2yr.used | ||
* ThinkPad {{T22}} | * ThinkPad {{T22}} | ||
− | * ThinkPad {{T23}} (low speed = ~2200, medium and maximum speed = ~4800; disengaged mode works at ~5800) | + | * ThinkPad {{T23}} |
+ | ** (low speed = '''~2200''', medium and maximum speed = '''~4800'''; disengaged mode works at '''~5800''') | ||
+ | ** (fan levels = ~RPM: 0 = '''0'''; 1,2 = '''~2200'''; 3,4,5,6,7 = '''~4900'''; disengaged,full-speed = '''~6331''') | ||
* ThinkPad {{T30}} | * ThinkPad {{T30}} | ||
* ThinkPad {{T40}} (fan levels RPM: 1-2 = ~2950, 3-5 = ~3600, 6-7 = ~4050; disengaged = ~5400) | * ThinkPad {{T40}} (fan levels RPM: 1-2 = ~2950, 3-5 = ~3600, 6-7 = ~4050; disengaged = ~5400) | ||
+ | * ThinkPad {{T400}} (fan levels RPM: 1 = ~1886, 2 = ~2800, 3-5 = ~3000, 6-7 = ~3500; disengaged mode works at ~5100) | ||
* ThinkPad {{T41}}, {{T41p}} (fan levels RPM: 1-2 = ~2980, 3-5 = ~3500, 6-7 = ~4050; disengaged mode works at ~5100) | * ThinkPad {{T41}}, {{T41p}} (fan levels RPM: 1-2 = ~2980, 3-5 = ~3500, 6-7 = ~4050; disengaged mode works at ~5100) | ||
+ | * ThinkPad {{T410i}} (fan levels RPM: 0 = off, 1 = ~1950, 2 = ~3575, 3-4 = ~3700, 5-6 = ~3825, 7 = ~4525; full-speed/disengaged = ~5450; only Linux-tested with tpfc0.5) | ||
* ThinkPad {{T42}}, {{T42p}} (fan levels RPM: 1-2 = ~2900, 3-5 = ~3700, 6-7 = ~4700; disengaged mode works at ~5200) | * ThinkPad {{T42}}, {{T42p}} (fan levels RPM: 1-2 = ~2900, 3-5 = ~3700, 6-7 = ~4700; disengaged mode works at ~5200) | ||
* ThinkPad {{T43}}, {{T43p}} (fan levels RPM: 1-2 = ~3300, 3-5 = ~4100, 6-7 = ~4700; disengaged mode works at ~6450) | * ThinkPad {{T43}}, {{T43p}} (fan levels RPM: 1-2 = ~3300, 3-5 = ~4100, 6-7 = ~4700; disengaged mode works at ~6450) | ||
* ThinkPad {{T60}} (fan levels RPM: 1-2 = 3000-3100, 3-5 = ~3600, 6-7 = ~4500; disengaged mode works at ~5500) | * ThinkPad {{T60}} (fan levels RPM: 1-2 = 3000-3100, 3-5 = ~3600, 6-7 = ~4500; disengaged mode works at ~5500) | ||
* ThinkPad {{T61}} (fan levels RPM: 0 = off, 1-2 = ~2980, 3-5 = ~3330, 6-7 = ~3760; disengaged mode works at ~4500) | * ThinkPad {{T61}} (fan levels RPM: 0 = off, 1-2 = ~2980, 3-5 = ~3330, 6-7 = ~3760; disengaged mode works at ~4500) | ||
+ | * ThinkPad {{W500}} (fan levels RPM: 0=off, 1-2 = 1900, 3-5 = ~3000, 6-7 = ~3500; disengaged mode works at ~5100) | ||
+ | * ThinkPad {{W510}} (fan levels RPM: 0=off, 1 = ~2750, 2 = ~3100, 3-5 = ~3500, 6-7 = ~4000; disengaged mode works at ~4585) | ||
* ThinkPad {{X30}} (level 0 = off, low = ~3900, medium = ~4200, maximum = ~4650, disengaged = ~5900) | * ThinkPad {{X30}} (level 0 = off, low = ~3900, medium = ~4200, maximum = ~4650, disengaged = ~5900) | ||
* ThinkPad {{X31}} (fan levels RPM: 0 = off, 1-2 = ~2850, 3-5 = ~3450, 6 = ~4050, 7 = ~4150; disengaged mode works at ~4975) | * ThinkPad {{X31}} (fan levels RPM: 0 = off, 1-2 = ~2850, 3-5 = ~3450, 6 = ~4050, 7 = ~4150; disengaged mode works at ~4975) | ||
Line 149: | Line 187: | ||
* ThinkPad {{X41T}} | * ThinkPad {{X41T}} | ||
* ThinkPad {{X60}} | * ThinkPad {{X60}} | ||
− | * ThinkPad {{X61s}} | + | ** level 0: 0 |
+ | ** level 1: ~2819 | ||
+ | ** level 2: ~2850 | ||
+ | ** level 3: ~3025 | ||
+ | ** level 4: ~3106 | ||
+ | ** level 5: ~3108 | ||
+ | ** level 6: ~3580 | ||
+ | ** level 7: ~3609~3700 | ||
+ | ** disengaged: ~4700 | ||
+ | * ThinkPad {{X61}} (fan levels RPM: 1-2 = ~3400, 3-5 = ~3800, 6-7 = ~4500, disengaged = ~6700) | ||
+ | * ThinkPad {{X61s}} (fan levels RPM: 0 = off, 1-2 = ~3800, 3-5 = ~4500, 6-7 = ~4800, disengaged = ~4800) (though fancontrol can keep it at 2500rpm...) | ||
+ | * ThinkPad {{X120e}} | ||
+ | * ThinkPad {{X201i}} (fan levels RPM: 0 = off, 1 = ~1900, 4 = ~3400, 7 = ~4200, disengaged = ~6300) | ||
+ | * ThinkPad {{X220}} (fan levels RPM: 0 = off, 1 = ~2000, 2 = ~3000, 3-4 = ~3500, 5-6 = ~3900, 7 = ~4500, full-speed = ~5300, disengaged = ~5300) | ||
* ThinkPad {{Z60t}}, {{Z60m}} (fan levels RPM: 1-2 = ~1700, 3-5 = ~2800, 6-7 = ~3500) | * ThinkPad {{Z60t}}, {{Z60m}} (fan levels RPM: 1-2 = ~1700, 3-5 = ~2800, 6-7 = ~3500) | ||
* ThinkPad {{Z61m}} | * ThinkPad {{Z61m}} | ||
* Thinkpad {{Z61p}} (fan levels 0-7, auto, disengaged; enable, disable; watchdog (untested)) | * Thinkpad {{Z61p}} (fan levels 0-7, auto, disengaged; enable, disable; watchdog (untested)) | ||
+ | * Thinkpad {{Edge11}} (fan levels: 0 = off, 1, 2, 3, 7 = full; RPM shown value is around 492 - 503, but should be 1000 - 3000) | ||
Probably other models are supported too (please update this page if you confirm this; maintain some ordering too). | Probably other models are supported too (please update this page if you confirm this; maintain some ordering too). | ||
==Models using a different interface== | ==Models using a different interface== | ||
− | The following models also work, use a different access method which supported (only) via the {{path|/proc/acpi/ibm/fan}} of [[ | + | The following models also work, use a different access method which supported (only) via the {{path|/proc/acpi/ibm/fan}} of [[thinkpad-acpi]]. No need for patching. |
* ThinkPad {{600E}}, {{600X}}, {{770E}}, {{770X}} (these use a different fan control interface) | * ThinkPad {{600E}}, {{600X}}, {{770E}}, {{770X}} (these use a different fan control interface) | ||
Line 163: | Line 215: | ||
==Unsupported models== | ==Unsupported models== | ||
− | * ThinkPad {{560}} (these models don't have a fan) | + | * ThinkPad {{560}}, {{560X}} (these models don't have a fan) |
Revision as of 13:05, 17 August 2014
This page discusses methods for controlling the system fan.
ATTENTION!
When designing fan-control applets, never ignore a valid thermal sensor.
Even if it seems to be stuck at a certain temperature, you must take that sensor into account. While it will probably make the fan spin faster than if the sensor was ignored, that's exactly what would happen when the fan is under EC control, and could very well be the reason for the "stuck" value in the first place. Always play it safe. If a battery pack seems to want the fan to always run faster, the only safe thing to do is to make it run faster. |
For Linux
To enable fan control, the module parameter fan_control=1 must be given to thinkpad-acpi.
For example, in Ubuntu 8.04 (Hardy Heron), add the following to /etc/modprobe.d/options: options thinkpad_acpi fan_control=1
For Debian Squeeze (testing) create /etc/modprobe.d/thinkpad_acpi.conf with: options thinkpad_acpi fan_control=1 and install the package thinkfan
Having done so, reboot and you can use the following commands to control fan speed:
# echo level 0 > /proc/acpi/ibm/fan
(fan off)
# echo level 2 > /proc/acpi/ibm/fan
(low speed)
# echo level 4 > /proc/acpi/ibm/fan
(medium speed)
# echo level 7 > /proc/acpi/ibm/fan
(maximum speed)
# echo level auto > /proc/acpi/ibm/fan
(automatic - default)
# echo level disengaged > /proc/acpi/ibm/fan
(disengaged)
If you receive a PERMISSION DENIED error you can use the following command syntax instead as a work-around:
# echo level 0 | sudo tee /proc/acpi/ibm/fan
(fan off)
# echo level 2 | sudo tee /proc/acpi/ibm/fan
(low speed)
# echo level 4 | sudo tee /proc/acpi/ibm/fan
(medium speed)
# echo level 7 | sudo tee /proc/acpi/ibm/fan
(maximum speed)
# echo level auto | sudo tee /proc/acpi/ibm/fan
(automatic - default)
# echo level disengaged | sudo tee /proc/acpi/ibm/fan
(disengaged)
Automated control scripts
An ACPI fan control script can be used to override the firmware's fan algorithm with gentler, quieter version. It monitors the laptop's thermal sensors and sets the fan speed accordingly, according to customizable thresholds. For the default behavior, simply save tp-fancontrol (download) as tp-fancontrol, make sure you've loaded thinkpad-acpi with the "fan_control=1" parameter, and run:
# ./tp-fancontrol
There is an distro independent daemon (http://launchpad.net/tp-fan/tpfand/0.94/+download/tpfand-0.94.tar.gz), written in python. Packages are available for debian based linux systems.
A GTK GUI program (packaged for Ubuntu 7.10 and 8.04) may also help.
Automated program - Simple ThinkPad Fan Control
This is program for controlling fans speed on IBM/Lenovo ThinkPads. It is written for Linux only. This program is written in C, using GTK GUI.
You are required to have the Linux kernel with 'thinkpad-acpi' patch. You must also enable manual control for your fans. For Linux 2.6.22 and above, you must add 'fan_control=1' as a module parameter to 'thinkpad-acpi'. For example, in Debian Lenny (and Ubuntu 8.04), you must add the following to "/etc/modprobe.d/options":
options thinkpad_acpi fan_control=1
Having done so, reboot. Now you'll be able to use this program easily.
Here is screenshot:
and direct download (src + i386 32bit binary). Please read README.txt file included in package.
Download links
Direct download:
I wrote this for my own personal use, and thought that it would be a good idea to release it to the world, and hope that it will be useful to someone! Feel free to send comments, bug reports or a thanks to the e-mail above. Although I don't use ThinkPad anymore (so I can't test the program), I still try to respond to all emails I get.
For Windows
Shimodax's ThinkPad fan control tool offers similar functionality (see forum discussion at thinkpads.com). Source and binaries are available through the "Tp4xFanControl" project on SourceForge.
Hardware specs
The following hardware behavior was discovered experimentally by Thinker and neither provided by nor confirmed by IBM/Lenovo. The following description may be inaccurate and may vary by model (see list of models above). The terminology probably does not match the one used by IBM/Lenovo engineers.
ACPI DSDT register HFSP (8 bits, offset 0x2F in the EmbeddedController address space, accessed through the standard EC interface at IO ports 0x62 and 0x66) is read/writable and has the following meaning:
Bits 7 6 5 4 3 2 1 0 --------------- Value 1 0 * * * * * * - automatic * 1 * * * * * * - disengaged 0 0 N N N N N N - manual (0..63; 0=disable fan, 1=min, ..., 7=max)
Changing modes may not be immediate on all ThinkPads. Later ThinkPad models seem to take at least 5s to start responding to a fan mode change, for example.
After boot, the HFSP register may not reflect the true state of the EC (on some models it reads 0x07 even though the EC is actually in automatic mode).
The HFSP register controls both fans at the same time in the X61/X61s.
Fan Tachometer
The embedded controller registers 0x84 (LSB), 0x85 (MSB) are the main fan tachometer, and report fan speed in RPM in everything since the A31 and maybe a little earlier. Not much is know about the tachometer in earlier models, or even whether they had one or not.
On the X61/X61s, one must select through EC register 0x31 bit 0 which fan the tachometer registers will expose (Firmware 7M). Beware: this is the same register used for brightness control in other models.
If the speed reported is 65335, then is typically due to a broken fan assembly. The fan might still be rotating. This error can be intermittent and can prevent booting (Error 'Fan error')
Automatic mode
In automatic mode, the embedded controller sets the fan speed automatically according to system temperatures and some unknown algorithm.
Note that the ACPI DSDT may supplement this in some models. The X40, for example, changes the profile of speeds the automatic mode should use depending on battery status.
Manual mode
In manual mode, the fan level is forced to the given value and the EC will auto-regulate the fan to maintain at a (roughly) constant RPM, which is model-dependent. Manual speed levels 8-63 yield the same behavior as level 7, and the the ACPI DSDT uses level 7 for the emergency mode it enters upon critical CPU/GPU temperature, so apparently 7 is the real maximum level.
Disengaged (full-speed) mode
In disengaged mode, the embedded controller does not monitor the fan speed. It "disengages" the closed-loop control function that keeps track of fan speed, and uses an open-loop control function that ramps up the fan to its maximum speed (100% duty-cycle). The end speed is not stable, but it is often much faster than the maximum speed manual and automatic modes would set the fan to.
Most newer ThinkPads take quite a while (in excess of one minute) to fully enter disengaged mode. Exiting it is much faster. The A31 acts differently, and switches to disengaged mode as fast as it switches to other modes.
For some reason, the embedded controller may stop updating the tachometer registers while entering or exiting disengaged mode in some ThinkPad firmware versions (hence the EC tachometer registers will not be updated on these models while entering/exiting disengaged mode). Once it arrives at maximum speed, or once it gets back at closed-loop cruise speed, the embedded controller starts updating the tachometer registers again. Later T models such as the T43 have this problem, while the A31 does not.
Supported models
The above was successfully tested on the following models:
- ThinkPad A31, A31p (fan levels RPM: 0 = off, 1-2 = ~3280-3380 (!), 3-5 = ~3200, 6-7 = ~3380, "disengaged" = ~4000 (see NOTE above))
- ThinkPad R50 (highest manual level is 3; disengage mode works and reaches much higher RPM)
- ThinkPad R50p (fan levels RPM: 0 = off, 1-2 = ~3200, 3-5 = ~3500-3600, 6-7 = ~3700-3800, disengaged = ~5300)
- ThinkPad R51 (fan levels RPM: 0 = off, 1-2 = ~3150, 3-5 = ~3350, 6 = ~3750, disengaged = ~5100)
- ThinkPad R51e (fan levels RPM: 0 = off, 1-2 = ~3300, 3-5 = ~3800, 6 = ~4150, disengaged = ~5100)
- ThinkPad R52 (fan levels RPM: 0 = off, 1-2 = ~3350, 3-5 = ~3650, 6 = ~4250, disengaged = ~5245)
- ThinkPad R60 (fan levels RPM: 0 = off, 1-1 = ~2650, 3-5 = ~3300, 6-7 = ~3950, disengaged = ~4800)
- ThinkPad R60e
- ThinkPad R61i (fan levels RPM: 0 = off, 1 = 2689, 2 = 2729, 3 = 3059, 4 = 3047, 5 = 3051, 6 = 3515, 7 = 3468, full-speed/disengaged = 4119~4200)mod.#7650-D7G@+/-2yr.used
- ThinkPad T22
- ThinkPad T23
- (low speed = ~2200, medium and maximum speed = ~4800; disengaged mode works at ~5800)
- (fan levels = ~RPM: 0 = 0; 1,2 = ~2200; 3,4,5,6,7 = ~4900; disengaged,full-speed = ~6331)
- ThinkPad T30
- ThinkPad T40 (fan levels RPM: 1-2 = ~2950, 3-5 = ~3600, 6-7 = ~4050; disengaged = ~5400)
- ThinkPad T400 (fan levels RPM: 1 = ~1886, 2 = ~2800, 3-5 = ~3000, 6-7 = ~3500; disengaged mode works at ~5100)
- ThinkPad T41, T41p (fan levels RPM: 1-2 = ~2980, 3-5 = ~3500, 6-7 = ~4050; disengaged mode works at ~5100)
- ThinkPad T410i (fan levels RPM: 0 = off, 1 = ~1950, 2 = ~3575, 3-4 = ~3700, 5-6 = ~3825, 7 = ~4525; full-speed/disengaged = ~5450; only Linux-tested with tpfc0.5)
- ThinkPad T42, T42p (fan levels RPM: 1-2 = ~2900, 3-5 = ~3700, 6-7 = ~4700; disengaged mode works at ~5200)
- ThinkPad T43, T43p (fan levels RPM: 1-2 = ~3300, 3-5 = ~4100, 6-7 = ~4700; disengaged mode works at ~6450)
- ThinkPad T60 (fan levels RPM: 1-2 = 3000-3100, 3-5 = ~3600, 6-7 = ~4500; disengaged mode works at ~5500)
- ThinkPad T61 (fan levels RPM: 0 = off, 1-2 = ~2980, 3-5 = ~3330, 6-7 = ~3760; disengaged mode works at ~4500)
- ThinkPad W500 (fan levels RPM: 0=off, 1-2 = 1900, 3-5 = ~3000, 6-7 = ~3500; disengaged mode works at ~5100)
- ThinkPad W510 (fan levels RPM: 0=off, 1 = ~2750, 2 = ~3100, 3-5 = ~3500, 6-7 = ~4000; disengaged mode works at ~4585)
- ThinkPad X30 (level 0 = off, low = ~3900, medium = ~4200, maximum = ~4650, disengaged = ~5900)
- ThinkPad X31 (fan levels RPM: 0 = off, 1-2 = ~2850, 3-5 = ~3450, 6 = ~4050, 7 = ~4150; disengaged mode works at ~4975)
- ThinkPad X40
- ThinkPad X41
- ThinkPad X41 Tablet
- ThinkPad X60
- level 0: 0
- level 1: ~2819
- level 2: ~2850
- level 3: ~3025
- level 4: ~3106
- level 5: ~3108
- level 6: ~3580
- level 7: ~3609~3700
- disengaged: ~4700
- ThinkPad X61 (fan levels RPM: 1-2 = ~3400, 3-5 = ~3800, 6-7 = ~4500, disengaged = ~6700)
- ThinkPad X61s (fan levels RPM: 0 = off, 1-2 = ~3800, 3-5 = ~4500, 6-7 = ~4800, disengaged = ~4800) (though fancontrol can keep it at 2500rpm...)
- ThinkPad X120e
- ThinkPad X201i (fan levels RPM: 0 = off, 1 = ~1900, 4 = ~3400, 7 = ~4200, disengaged = ~6300)
- ThinkPad X220 (fan levels RPM: 0 = off, 1 = ~2000, 2 = ~3000, 3-4 = ~3500, 5-6 = ~3900, 7 = ~4500, full-speed = ~5300, disengaged = ~5300)
- ThinkPad Z60t, Z60m (fan levels RPM: 1-2 = ~1700, 3-5 = ~2800, 6-7 = ~3500)
- ThinkPad Z61m
- Thinkpad Z61p (fan levels 0-7, auto, disengaged; enable, disable; watchdog (untested))
- Thinkpad Template:Edge11 (fan levels: 0 = off, 1, 2, 3, 7 = full; RPM shown value is around 492 - 503, but should be 1000 - 3000)
Probably other models are supported too (please update this page if you confirm this; maintain some ordering too).
Models using a different interface
The following models also work, use a different access method which supported (only) via the /proc/acpi/ibm/fan of thinkpad-acpi. No need for patching.