UltraslimBay Floppy Drive
- 05K8874, 20L1931
In the case that you have two FDDs, or want to attach the FDD externally after the booting process; be aware that the floppy drivers' hardware auto-detection cannot be relied upon. However, you can force the floppy driver to use both of them by adding the following line to /etc/modprobe.conf:
options floppy floppy=1,4,cmos
This will give you support for either external FDD, or UltraslimBay FDD, or both if you plug them in after the booting process.
If there is a FDD attached to the external port during the boot process, it will be identified as /dev/fd0 and the FDD in the UltraslimBay will be identified as /dev/fd1. Otherwise (assuming no FDDs are externally attached during boot or FDD in UltraslimBay during boot), the UltraslimBay FDD would be assigned as /dev/fd0 and external port would be assigned as /dev/fd1. An ACPI-aware floppy driver would have the ability to stop the devices from swapping around, but such a thing doesn't exist yet.