SelectaBase 600

From ThinkWiki
Revision as of 13:00, 8 February 2011 by Parts justlaptops (Talk | contribs) (IBM SelectaBase 600)
Jump to: navigation, search

IBM SelectaBase 600

The SelectaBase 600 acts as a port replicator for 600 series ThinkPads and contains basic pass-through connections for the notebook ports. It comes without integrated power supply but provides the same DC port as found in a ThinkPad, so you need to use either your Thinkpad AC adapter or another IBM AC adapter. Besides all the pass-through ports the Port Replicator comes with a slot for a cable lock (only for the dock though).

It contains a second docking port to allow it to be docked onto the SelectaDock I, SelectaDock II or SelectaDock III docking station, acting as a middle layer between the notebook and the dock. Also, if not connected to the SelectaDock, this port can be used to extend the SelectaBase 600 with a SelectaBase PC Card Enabler or SelectaBase PC Card Enabler with Advanced EtherJet.


Supported ThinkPads

Part/FRU #s

  • P/N: 12J2468
    • FRU P/N: 12P4057