SMAPI support for Linux
ThinkPad laptops include a proprietary interface called SMAPI BIOS (System Management Application Program Interface) which provides some hardware control functionality that is not exposed by any other interface (e.g., ACPI).
The SMAPI interfaces changes a lot between models, and is poorly documented, so Linux support is not exhaustive for most models. There are currently two SMAPI access mechanisms available: thinkpad and tpctl for older ThinkPads, and tp_smapi for newer ones.
Using the thinkpad module
This solution consists of a module, called thinkpad, and a user-space tool caled tpctl. It provides very rich functionality for older ThinkPads, but on newer ThinkPads much of this functionality is exposed and supported through an ACPI interface and the SMAPI access does not work anymore. For details, see the README and list of supported models.
- Project page: http://tpctl.sourceforge.net/
- You need to download the thinkpad module and tpctl userspace tool.
- There is also an optional GUI: configure-thinkpad.
Using the tp_smapi module
The tp_smapi kernel module uses the current SMAPI interface to expose some features of the SMAPI BIOS via a sysfs interface. Currently, the only implemented functionality is control over battery charging (this is useful for increasing battery lifetime, or for using a leftover under-spec power supply that can't handle the combined power draw of running and charging).
To compile and load the module:
# tar xzvf tp_smapi-0.06.tgz # cd tp_smapi-0.06 # make load
To install permanently (optional):
# make install # modprobe tp_smapi
Example of usage:
# echo 40 > /sys/devices/platform/smapi/start_charge_thresh # echo 70 > /sys/devices/platform/smapi/stop_charge_thresh # cat /sys/devices/platform/smapi/*_charge_thresh 40 70
To unconditionally inhibit charging for 17 minutes:
# echo 17 > /sys/devices/platform/smapi/inhibit_charge_minutes
To cancel charge inhibiting:
# echo 0 > /sys/devices/platform/smapi/inhibit_charge_minutes
If you get a "not supported" error, your laptop doesn't provide the specific function (or at least not via SMAPI).
Other things that can be controlled through SMAPI, but are not supported in this version of the driver, include forcing battery discharge, PCI bus power saving, CPU power saving control, extended smart battery information, CD/DVD drive speed control and fan control. See the exported symbols in PWRMGRIF.DLL or TPPWR32.DLL in your Windows partition for more hints.
Models on which this driver works
For the details, see the README file inside the package. If you have new data, please report it on the discussion page.
Models on which none of the functions work
- ThinkPad T40, T40p, R50p, R40, X31 and probably all earlier models. These apparently don't have the relevant capabilities, even under Windows.
Please update the above and report your experience on the discussion page. If the module loads but gives "not supported" errors when you try to use it, report whether the corresponding functionality is available under Windows - maybe your ThinkPad just can't do that.