View source for Installing Debian on a ThinkPad G41

If you want to keep the Windows XP partition you should seriously consider whether you want it to be VFAT or NTFS, because on the very first bootup of the system it will automatically run a command to convert from VFAT to NTFS.  I recommend disabling the automatic conversion as per instructions [http://mailman.linux-thinkpad.org/pipermail/linux-thinkpad/2004-February/016069.html here], i.e.:

Using Knoppix, mount the XP partition, and move the following files (assuming you've mounted {{path|/dev/hda1}} under {{path|/target}}):

windows/system32/convert.exe:
:{{cmdroot|mv /target/windows/system32/convert.exe /target/windows/system32/convert_.ex_}}
windows/system32/autoconv.exe:
:{{cmdroot|mv /target/windows/system32/autoconv.exe /target/windows/system32/autoconv_.ex_}}
i386/convert.exe<br>
:{{cmdroot|mv /target/i386/convert.exe /target/i386/convert_.ex_}}
i386/autoconv.exe<br>
:{{cmdroot|mv /target/i386/autoconv.exe /target/i386/autoconv_.ex_}}

I like to keep the Windows XP partition for at least a little while to run it and see how much development effort IBM has spent to make the user experience under Windows a full-featured one, complete with many assistant applications and helper utilities rich in multi-media content and graphics - in sharp contrast with what they provide for Linux users.

IBM does not provide the rescue/recovery CD set with this model so I suggest before anything else that you immediately boot into Windows and create the set if you think you will ever want to re-image the drive.  You could always order the set from IBM for $45.  The set from IBM consists of a "Rescue and Recovery" CD plus 6 "Product Recovery" CD's which contain the actual image that gets written to the hard drive.  

After creating the recovery CD set I recommend going into the BIOS and setting the "IBM Predesktop Area" in the BIOS under "Security" to "Disabled".  This enables you to remove the â€œPreDesktop Environmentâ€ area, which is the second partition and takes over 3 GB of disk space.  The Predesktop Environment is not very useful unless you want to have the feature of being able to re-image your disk and re-install Windows from scratch.  If you're really concerned that you will somehow badly screw up your Windows environment - if you ever use it :-)  - you can always create restore points without wasting precious disk space on the Predesktop Environment.


Notes on the model used in this setup:
This info is for setting up Debian on a G41 with the following features:
* Processor: Mobile Intel Pentium 4 Processor 548 with HT Technology
* Graphics: NVIDIA GeForce FX Go5200 (nVidia Corporation NV34M)
* Display: 1400x1050 SXGA+
* Wireless: ThinkPad 11b/g Wi-Fi Wireless (Atheros Communications, Inc. AR5212 802.11abg)
* Ethernet: Integrated Gigabit Ethernet (Broadcom Corporation NetXtreme BCM5705M_2)
* Sound: SoundMAX (Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller)

If your model does not have these features, then some or most of this information might not apply.

== Disk Preparation and Partitioning ==
Next I ran Knoppix again and used the QTparted graphical disk partitioning tool to alter the partition layout of the drive.  I deleted the recovery/predesktop partition (partition 2) and shrunk the XP partition (partition 1  to 8 GB.  QTParted will correctly resize the XP partition regardless of whether it is VFAT or NTFS.  Finally, I created a 2300 MB swap partition as the second partition and used the remainder of the disk (partition 3) as one large XFS filesystem for Linux.  The reason I chose the high value for the swap partition size was so that it can accommodate suspend to disk, which requires a swap partition larger than the amount of installed RAM, and allowing for the maximum 2GB of RAM to be installed.

== Debian installation ==
After this I installed {{Debian}} using an official i386 Debian minimal bootable CD netinst image obtained from http://www.us.debian.org/CD/netinst/

When the CD booted I pressed the {{key|F3}} key which gave instructions to type "expert26" at the boot prompt in order to install in expert mode using a more recent 2.6 Linux kernel.  I accepted the defaults for all questions except that when it asked about partitioning the disk I chose the option to "manually edit the partition table".  This is because I already partitioned the disk with QTParted above and created the swap and XFS filesystems I plan to use.  So in the manual partition setup section I simply told it to use hda2 as swap and to use hda3 as xfs, assign the mount point "/" to it, and to format the filesystem.  Once this is done the rest is simple.  When it asked about making Linux bootable directly from the hard disk, it is important to NOT chose the Grub boot loader since the version included with the installer has a serious problem dealing with XFS filesystems.  Choose Lilo instead and everything will be fine.

After the first reboot during the install it asks to set up apt sources.  I chose to use http and selected a local mirror in my country.  It then asked if I want to choose packages to install and I said no.  My philosophy is to install Debian with the minimal amount of stuff, get it working, and then later on install any other applications I want.  Also, if you plan on dist-upgrading from stable to testing or Sid then it is easier to do with only a minimal installation.

== Installing a few important packages ==
Here are a few important packages that it is good to install right away:
:{{cmdroot|apt-get install less vim}}
:{{cmdroot|apt-get remove --purge nvi}}

vim is a much better than nvi.  Less is much better than more which is installed by default.


== Building a Linux kernel ==
The next thing I did is immediately build my own kernel.  This involved installing:
:{{cmdroot|apt-get install ncftp build-essential bin86 libncurses-dev bzip2}}

I then used ncftp to retrieve linux-2.6.12.tar.bz2 from ftp://ftp.kernel.org/pub/linux/kernel/v2.6/

:{{cmdroot|cd /usr/src}}
:{{cmdroot|ncftp}}
         open ftp.kernel.org
         cd pub/linux/kernel/v2.6
         get linux-2.6.12.tar.bz2
         bye

:{{cmdroot|tar -xjf linux-2.6.12.tar.bz2}}
:{{cmdroot|ln -s linux-2.6.12 linux}}
:{{cmdroot|cd linux}}
:{{cmdroot|make menuconfig}}

Prior to compiling the kernel it is important to have an inventory of the components in your system.  Here is a list of the most important components in terms of how Linux sees them.  You will need this list during menuconfig in order to enable support for these components.

* Intel Pentium 4 PC-compatible processor.  Since this is a HyperThreading processor it requires Symmetric multi-processing support with a maximum number of CPUs = 2
* ACPI interface supporting CPU frequency scaling
* PCI bridge
* ISA bridge
* CardBus yenta-compatible PC Card controller
* PC-style parallel port
* Intel Ultra ATA ICH4 Storage Controller (IDE interface)
* Broadcom Tigon3 1000 Mbit ethernet controller
* PS/2 Mouse interface
* 8250/16550 compatible serial port
* Intel 855GM AGP chipset
* Intel 82801 (ICH) SMBus (I2C)
* VESA 2.0 compatible graphics chipset
* Intel AC97 Audio controller
* Intel MC97 Modem
* Intel UHCI USB controller
* Intel EHCI USB 2.0 controller


There are a few important things in the kernel config to be aware of.  

* Power Management/ACPI:  I chose to not enable IBM laptop extras (ibm_acpi) in order to build a newer version later
* under ATA support be sure to select Intel PIIXn chipsets support
* You must enable Direct Rendering Manager support (without selecting any of the driver modules, since we will build our own later)
* In the Graphics section select VESA VGA graphics support but DO NOT select nVidia Framebuffer Support as it interferes with the nvidia DRM driver we will install below


:{{cmdroot|cp .config ../dot-config-2.6.12}}  #good to save a copy
:{{cmdroot|make}}
:{{cmdroot|make modules_install}}
:{{cmdroot|cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.12}}
:{{cmdroot|cp System.map /boot/System.map-2.6.12}}
:{{cmdroot|vi /etc/lilo.conf}}


 #lilo stanza for image from {{path|lilo.conf}}
 image=/boot/vmlinuz-2.6.12
 label=2.6.12
 # the following sets the console to framebuffer mode 1280x1024
 # you must have â€œVESA VGA graphics supportâ€ selected
 # in the kernel under Device Drivers -> Graphics support
 # otherwise set to â€œ1â€ or â€œnormalâ€
 vga=0x31B 
 read-only


Then run "lilo" to install it to the MBR.<br>
Now it should be possible to boot into the new 2.6.12 kernel.

== Setting up graphics ==
First, it is necessary to install the minimal essential components necessary to get the graphical environment working:
:{{cmdroot|apt-get install x-window-system-core}}

Then you need to set up the nvidia driver.  The easiest way to do this is with the module-assistant utility:

:{{cmdroot|apt-get install module-assistant}}
:{{cmdroot|m-a prepare}}
:{{cmdroot|m-a a-i nvidia}}
:{{cmdroot|apt-get install nvidia-glx nvidia-settings}}
:{{cmdroot|echo nvidia >> /etc/modules}}
:{{cmdroot|modprobe nvidia}}
:{{cmdroot|dpkg-reconfigure xserver-xfree86}}

if you are using Sid, then use :{{cmdroot|dpkg-reconfigure xserver-xorg}}

This will ask a lot of questions about X setup.  Here are options I selected:
* allow it to attempt to autodetect video hardware, but when it shows the list, scroll down one and select "nividia" (NOT "nv")
* leave video RAM setting blank.  X server will autodetect it
* do NOT use kernel framebuffer interface
* for keyboard layout do not select default "us" value, but replace with "intl" (this is better because it also supports multi-key on the right-alt key)
* XKB rule set accept default value
* for keyboard model replace "pc105" with "pc102"
* attempt mouse autodetection but then select /dev/psaux
* Mouse protocol: select ImPS/2
* yes to emulate 3 button mouse
* yes to enable scroll events
* accept all modules (default)
* under display setup, select only mode 1400x1050
* under choose method, select medium
* select 1400x1050 @ 75Hz
* select default color depth of 24 (you can select 16 which is slightly lower, and might give slightly better performance)

At this point you should be able to start X from the command line with the startx command.  But it will not look very appealing.  Install a window manager/desktop environment, e.g.

:{{cmdroot|apt-get install openbox obconf openbox-themes fbpanel}}
And some fonts to go along with it:

:{{cmdroot|apt-get install ttf-dustin ttf-freefont ttf-opensymbol ttf-thryomanes \
ttf-xfree86-nonfree xfonts-100dpi xfonts-100dpi-transcoded xfonts-75dpi \
xfonts-75dpi-transcoded xfonts-artwiz xfonts-base xfonts-base-transcoded \
xfonts-biznet-100dpi xfonts-biznet-75dpi xfonts-biznet-base xfonts-scalable \
defoma fontconfig}}

For the fontconfig debconf question I chose to use Freetype<br><br>

Then create a {{path|.xsession}} file in your home directory to invoke openbox/fbpanel when you run "startx":

   #!/bin/sh
   # ~/.xsession: stuff to do when starting X
   #
   #set the background
   xsetroot -solid DarkSlateGrey 
   # increase the mouse sensitivity a bit, good for Trackpoints
   xset m 4 1
   #run fbpanel               
   fbpanel &    
   # run openbox, our window manager                               
   exec openbox                          

== Setting up the Wireless driver ==
lspci listing should show the Atheros Communications 802.11abg adapter.  (NOTE: Recently there have been some problems with this driver causing freezes on newer kernels.  [http://article.gmane.org/gmane.linux.drivers.madwifi.devel/1335 on this page] there is a patch which may fix the problem.)

Here is how to get it working using the [http://madwifi.sourceforge.net/ madwifi] driver:

:{{cmdroot|apt-get install cvs}}
:{{cmdroot|cd /usr/local/src}}
:{{cmdroot|cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/madwifi co madwifi}}
:{{cmdroot|cd madwifi}}
:{{cmdroot|make && make install}}
:{{cmdroot|modprobe ath_pci}}

:{{cmdroot|apt-get install wireless-tools}}  (you will need these to configure the interface)
:{{cmdroot|apt-get install dhcp3-client}}  (dhcp client for use with wireless access points)

See {{path|/usr/local/src/madwifi/README}} for useful information about the configuring the interface.

A very useful tool to have is airsnort which will scan and show a list of all wireless networks in your area.  

Before running any of the wireless utilities and configuring it you may need to bring the interface up first:
:{{cmdroot|ifconfig ath0 up}}  
The easiest way to configure the interface is to use kwifimanager, a nice graphical utility that saves the manual grunt work of figuring out which iwconfig and iwpriv commands to use. It supposedly also supports scanning for wireless networks but on my version this function did not seem to work.  However it is still a very useful utility.  
:{{cmdroot|apt-get install kwifimanager}}  
Once I scanned and had a list of access points (using airsnort or else :{{cmdroot|iwlist ath0 scan}}) basically all I had to do was go into the â€œSettingsâ€ menu and select â€œConfiguration Editorâ€.  In there under â€œNetwork Nameâ€ you enter the SSID of an access point, which is the name of the wireless network (not the BSSID which is the long hex address).  Make sure that â€œath0â€ is selected in the â€œSettings apply to interfaceâ€ text box (click â€œAutodetectâ€ button and it should show up).  After activating the config you need to run dhclient on the interface to obtain an IP address from the access point:
:{{cmdroot|dhclient ath0}}

== Setting up sound ==

The ALSA sound module is snd_intel8x0m

:{{cmdroot|apt-get install alsa-base alsa-utils alsamixergui}}
:{{cmdroot|alsaconfig}}


== Power management ==

According to power/video.txt in the Linux kernel source documentation ACPI suspend-to-RAM mode (a.k.a. "Standby" or "Sleep") does not and can not work with Hyperthreading CPUs: 

"S3 has absolutely no chance of working with SMP/HT. Be sure it to turn it off before testing (swsusp should work ok, OTOH)."

As of this writing both swsusp and swsusp2 appear to not work.  More experimentation is needed to test them with and without certain modules loaded.  Both of them seem to enter into standby mode correctly but after what appears to be a normal wakeup process the console goes blank and the system becomes totally unresponsive.  It should also be noted that this author experienced severe filesystem degradation when attempting to resume from a swsusp2 standby state, resulting in a large number of disconnected inodes and requiring a complete re-install of Linux.  Therefore extreme caution is urged when experimenting.  swsusp2 seems to be a very large patch that may have a higher likelihood of conflicting with other patches.  Hopefully it will be incorporated into the kernel at some point.  

It is probably worth installing the latest ibm-acpi, which adds functionality for Fn keys, allows setting of threshold temperatures for fans, and more.  As of this writing much of this functionality is untested or unknown on the G41.  Still it doesn't hurt to install it:

Go to the [http://ibm-acpi.sourceforge.net/ IBM-acpi driver website] and download the latest driver (0.11 as of this writing) into /usr/local/src

:{{cmdroot|tar -xzf ibm-acpi-0.11.tar.gz}}
:{{cmdroot|cd ibm-acpi-0.11}}
:{{cmdroot|make}}
:{{cmdroot|make install}}
:{{cmdroot|modprobe ibm_acpi}}
:{{cmdroot|echo "ibm_acpi" >> /etc/modules}}

You can see the currently installed version with:

:{{cmdroot|cat /proc/acpi/ibm/driver}}


== Further stuff ==

[http://www.nongnu.org/tpb/ tpb] is a neat program that enables the on-screen display for certain keys functions such as the volume control and LCD brightness levels.  {{cmdroot|apt-get install tpb}}  and then edit /etc/tpbrc

This page still needs a section on configuring the modem.  The last time I tested on another Thinkpad model, neither the Open-Source nor the proprietary driver for the â€œslmodemâ€ Intel AC'97 Modem Controller seemed to work to well.  Fortunately I have a miniPCI card with a true Lucent WinModem which uses the â€œalkâ€ driver available [http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/ here].  If you are planning to use the modem a lot it may be worth the $5 to pick one of these up on Ebay as it is much easier to configure and works quite reliably under Linux.



[[Category:G41]]