Difference between revisions of "ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II"
(added installation instructions for prliminary Linux drivers)
|Line 1:||Line 1:|
The ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II appears to be a Realtek 8191 wireless card. Currently
The ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II appears to be a Realtek 8191 wireless card. Currently no drivers can [http://www..com//.?=&=-
== Features ==
== Features ==
Revision as of 11:23, 8 January 2010
The ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II appears to be a Realtek 8191 wireless card. Currently no drivers are included in the popular Linux distributions, but driver can be downloaded from Realtek website . You need to download RTL8192SE driver if your card is identified (by running 'lspci -v') as 'Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)'.
More information about using Realtek native driver in Ubuntu: 
Following the links above and doing some searching, it seems that it should be possible to get this card to work. There a two ways one is using the alpha/beta/? version of the Linux drivers, the second is using Windows drivers and ndiswrapper. Using the preliminary Linux drivers is described here. (Instructions tested on a Thinkpad X200s with a Realtek 8192 and Ubuntu 9.10).
- In order to use the Linux driver we have to compile them for the kernel you are using. Generally for compiling drivers you have to install some packages for this first. In the example here you have to plug in a wired network and type in the following command, this will install all necessary stuff:
sudo apt-get install build-essential linux-source-2.6.31
- Now you have to obtain a copy of the Linux drivers: , there is also a 64 bit version available .
- Unpack the driver and open up an console and go to the directory you unpacked the driver to.
- Compile the drivers using the following commands:
sudo make sudo su make install
- Lastly you have to load the freshly compiled driver by running the following command:
If everything worked fine the card should start working immediately. More information on the installation procedure including a description of the second method using the Windows drivers and Ndiswrapper can be found here:.
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. Device e020 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=16K] Capabilities:  Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities:  Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities:  Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities:  Advanced Error Reporting <?> Capabilities:  Virtual Channel <?> Capabilities:  Device Serial Number 00-e0-4c-ff-fe-22-55-88