Difference between revisions of "Talk:Install Ubuntu Intrepid Ibex on a T61p"

From ThinkWiki
Jump to: navigation, search
(Possible Mistake in Tp_smapi section: new section)
(fix start_charge_thresh)
Line 27: Line 27:
 
  echo "90" | sudo tee -a /sys/devices/platform/smapi/BAT0/stop_charge_thresh
 
  echo "90" | sudo tee -a /sys/devices/platform/smapi/BAT0/stop_charge_thresh
 
start-> stop? This section is talking about an upper limit, I thought.
 
start-> stop? This section is talking about an upper limit, I thought.
 +
 +
You're right, Jomanchu. Fixed.--[[User:Gertvdijk|Gertvdijk]] 17:10, 26 January 2009 (UTC)

Revision as of 18:10, 26 January 2009

Log out & NVidia

This is a problem between the 177.* drivers and broken Lenovo DFP EDID. You can make it work by increasing timeout in GDM: e.g. set GdmXServerTimeout=45 in /etc/gdm/gdm.conf

This workaround works. I've read it on the LP bug report as well. I don't know if it has to do with the broken EDID. I've seen much more laptops with broked EDIDs, but this hang does not occur with Intrepid on those machines.--Gertvdijk 18:42, 6 November 2008 (CET)

WiFi & HW RFkill

I think that the interface is just not brought up after the kill switch is disabled. Try: ip l s wlan0 up

This works, just like reloading the module. Why is it so hard to fix in the the release?--Gertvdijk 18:42, 6 November 2008 (CET)

UUOC award nomination

Looking at this line in the powermizer-loop script

powerstate=`cat /proc/acpi/ac_adapter/AC/state | awk '{print $2}'`

Can this be changed to

powerstate=`awk '{print $2}' /proc/acpi/ac_adapter/AC/state`

For UUOC, see Wikipedia ;) Jomanchu 08:51, 18 January 2009 (UTC)

Possible Mistake in Tp_smapi section

Should

echo "90" | sudo tee -a /sys/devices/platform/smapi/BAT0/start_charge_thresh

be changed to

echo "90" | sudo tee -a /sys/devices/platform/smapi/BAT0/stop_charge_thresh

start-> stop? This section is talking about an upper limit, I thought.

You're right, Jomanchu. Fixed.--Gertvdijk 17:10, 26 January 2009 (UTC)