Difference between revisions of "Problem with Dock USB Ports"

From ThinkWiki
Jump to: navigation, search
m (Add links.)
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
====ThinkPad T30 model 2366-M1U====
+
====ThinkPad {{T30}} model 2366-M1U====
 
*BIOS Version 2.08
 
*BIOS Version 2.08
 
*Embedded Controller Version 1.06
 
*Embedded Controller Version 1.06
Line 31: Line 31:
 
'''Problem solved by purchasing new dock from IBM'''
 
'''Problem solved by purchasing new dock from IBM'''
  
====ThinkPad X21====
+
====ThinkPad {{X21}}====
 
*Ubuntu versions 6.06, 6.10, 7.04 (Dapper, Edgy, Feisty)
 
*Ubuntu versions 6.06, 6.10, 7.04 (Dapper, Edgy, Feisty)
  
Because the X21 does not have room for a CDROM, one must plug it into the dock to perform a CD based install.
+
Because the X21 does not have room for a CDROM, one must plug it into the dock to perform a CD based install. Early versions of the dock are known to have USB problems, which in turn cause Linux installation issuesTo work around this problem, read more at: [[Installing Ubuntu on a ThinkPad X21]]
 
+
Using the Live CD for any of the Ubuntu versions listed above, I was able to get the Live CD to boot, but installing Ubuntu to the Harddrive would hang during loading of the usb-storage module.  Looking at the logs, I received the same "Maybe the USB cable is bad?" message as the T30 post above.
+
 
+
Using the Alternate CD, was able to installAt the installer's boot screen, F6 and enter a boot parameter of "debian-installer/probe/usb=false" (don't use quotes).  Then once you're in the text mode installation and have hit your first set of questions, do an Alt+F2 and delete "usb-storage.ko" from /lib/modules/2.6.*/
+

Latest revision as of 20:36, 24 March 2020

ThinkPad T30 model 2366-M1U

  • BIOS Version 2.08
  • Embedded Controller Version 1.06

Currently Running a Dock II model 2631-20U

  • Debian sarge with Linux 2.6.10-4 from sid

When the laptop is running in the dock, the USB ports are not fuctional. This is the only error that I have seen in the kernel.

  • hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

It doesn't matter whether a device is plugged into one of the two USB ports on the back of the dock.

My original dock worked just fine. The problem only seems to exist with my new dock when running Linux. The Dock's USB ports do work in Windows XP. I have tried various kernel versions through out the last few weeks. Is anybody else having similiar issues?

Tested with Knoppix 3.7 running Linux Kernel 2.4.27 When the mouse is plugged into the top port on the dock, I get this error:

  • hub.c: Cannot enable port 1 of hub 1, disabling port.
  • hub.c: Maybe the USB cable is bad?

When the mouse is plugged into the bottom port I don't get an error, but the mouse isn't detected either. When the laptop is not plugged into the dock and a mouse is plugged in, the last two lines reported by hub.c are:

  • hub.c: new USB device 00:1d.1-2, assigned address 2
  • usb.c: USB device 2 (vend/prod 0x45e/0x39) is not claimed by any active driver.

instead of the two lines mentioned above. The mouse works when a Dock is not involved.

The Linux 2.6 kernel that Knoppix 3.7 uses behaves almost identical to the 2.4 kernel.

Windows XP Pro works with the Dock 2631.

When testing my T30 on a Port Replicator model 2878, the Dock's USB ports work.

When testing my T30 on a Dock model 2531, the Dock's USB ports did not work.

Problem solved by purchasing new dock from IBM

ThinkPad X21

  • Ubuntu versions 6.06, 6.10, 7.04 (Dapper, Edgy, Feisty)

Because the X21 does not have room for a CDROM, one must plug it into the dock to perform a CD based install. Early versions of the dock are known to have USB problems, which in turn cause Linux installation issues. To work around this problem, read more at: Installing Ubuntu on a ThinkPad X21