PAE is a CPU flag, indicating that the processor has support for Physical Address Extension, allowing for more than 4 GB of memory to be addressed.
On a 32-Bit system with a flat memory model the address range is limited to 32 bits worth of memory space: 232 equals a maximum of 4 GB of addressable system memory. Because hardware such as AGP and PCI device addresses also have to fit into this limit, memory is limited to even less than 4 GB, depending on the system e.g. around 3.2 GB (some systems more, some less).
PAE-enabled CPUs use a page table to access more than 4 GB by moving a 32-Bit address window on a larger 36 bits addressing space, which allows memory addressing up to 64 GB (236). Each process will still be limited to a maximum of 4 GB of memory, but the system as a whole is able to address up to 64 GB.
Modern 32-Bit operating systems rely on Physical Address Extension and don't work without it. Those include (in alphabetical order):
- Linux with a x86 (32-Bit) PAE kernel (ending with
- Debian with kernel package
- Ubuntu starting with 12.04 LTS
- Debian with kernel package
- Mac OS X/Intel 32-Bit
- Windows 8 32-Bit
Non-PAE Linux kernels use
486, while kernels for
686 most commonly default to PAE since around 2012. Mac OS X/Intel never officially supported non-PAE CPUs. The last Windows operating system to work on non-PAE CPUs is Windows 7 32-Bit.
Note: 64-Bit operating systems don't use or require PAE (yet). In fact, x86-64 (also called amd64 and x64) does the reverse: current 64-Bit x86-CPUs (2003-2017) use a phyiscal address size of 48 bits, allowing 256 TB of memory to be addressed directly (248). In the future, when the limits comes closer, this may be expanded to the full 64 bits. For now, as 48 bits are absolutely sufficient, it makes sense to not have to wire address lanes that will never be used anyhow. Looking into the past, processors such as the Motorola 68EC020 used 24 bits physically while reporting to be a 32-Bit processor to the software. This all makes sense when considering manufactoring costs and the assumption of not using it anyhow.
To see if a specific CPU supportes PAE, list the contents of
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.60GHz stepping : 6 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1199.95 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management:
This is the
cpuinfo of a Dothan core Pentium M of the first generation. Even though it uses a 36-Bit physical address size,
pae (as well as
nx) is not listed among the provided processor features.
Note: Processors which include
pae in the list of flags also include
nx (No eXecute), which is the NX-Bit on Intel CPUs.
The one series of processors with internal PAE support but without the CPU flag is the first generation Dothan (Pentium M). For this CPU, PAE can still be used with a modern Linux kernel when using the Kernel parameter
forcepae. (The second generation Dothan core and its successors include both CPU flags:
Note that using a PAE kernel on a system with less then 4 GB of memory will produce a certain overhead and thus has a small impact on performance.
- linux-image-686-pae (Debian wheezy)
- What's the meaning of “-pae” at the end of kernel version? (Ubuntu forum)
- Physical Address Extension (Windows Dev Center)
- Debian Bug #643012, Pentium M: Not possible to install PAE kernel