Installing Ubuntu on a ThinkPad 560E

From ThinkWiki
Revision as of 20:33, 24 June 2009 by Whizkid (Talk | contribs) (Minor update)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

The 560E is a capable ultra-portable machine, but lacks booting options. I used a PCMCIA CF card reader and a PCMCIA wired network card to install Ubuntu. A bare minimum install of Ubuntu requires 32MB RAM. Consider adding a 64MB stick to your 560E to fully load it with 80MB RAM.

2GB of disk space is required for a typical install. The 560E can handle drives at least up to 8GB and possibly larger.

Preparation

  • Get an Ubuntu netboot image
  • Insert card reader into another Linux laptop
dd if=boot.img of=/dev/sdb
  • Change boot order on 560E to PCMCIA then hard disk
  • Insert card reader and network card and start machine