Installing Ubuntu 7.10 (Gutsy Gibbon) on a ThinkPad T61
Intel X3100 Works out of the box
Nvidia accelerated 3D support is not installed by default. To install 3D support click System->Administration->Restricted Drivers Manager
Python script fix (easy fix, recommended for most users)
1) Download the T61 audio hack from Launchpad. Move it to a convenient folder (e.g., not your desktop).
2) Go to System -> Preferences -> Sessions -> Startup Programs -> Add.
3) Name it whatever you want. Choose something simple like "Python audio fix."
4) Go to Command, and enter the following (with quotation marks):
gksudo "[THE FOLDER THAT T61_AUDIO_HACK.PY IS IN]/t61_audio_hack.py"
For example, on my computer, I put t61_audio_hack.py into the /fixes folder in my home folder, so I entered:
into the Command textbox.
ALSA driver (hard fix, recommended for advanced users)
Another solution is to download Alsa 1.0.14 and replace patch_analog.c with the patch_analog.c found in ciphermonk's Fedora on a T61 guide.
wget ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.14.tar.bz2 wget http://forums.fedoraforum.org/attachment.php?attachmentid=12630 tar -jxvf alsa-driver-1.0.14.tar.bz2 tar -zxvf patch_analog.c.tar.gz cp patch_analog.c alsa-driver-1.0.14/alsa-kernel/pci/hda/ cd alsa-driver-1.0.14 ./configure && make sudo make install
Then, add the following line to /etc/modprobe.d/alsa-base
options snd-hda-intel index=0 model=thinkpad
Reboot and open Gnome Volume Control. In the Switches tab, make sure Speaker and Headphone are both checked. The sound hotkeys may not work correctly by default. To fix them, go to System -> Preferences -> Sound. Under Default Mixer Tracks, choose PCM.
The modem works with the Linuxant drivers available at http://www.linuxant.com
The reader works with ThinkFinger. Instructions.
Trackpad scrolling works out of the box in the standard thinkpad way: Slide your finger up and down the very right edge of the trackpad.
To enable using the middle mouse button to scroll add the following in your Trackpoint InputDevice section in /etc/X11/xorg.conf:
Option "EmulateWheel" "true" Option "EmulateWheelTimeOut" "200" Option "EmulateWheelButton" "2"
Hibernate works fine, but when resuming from a suspend the backlight doesn't come back on, making it nearly impossible to see anything on the screen. Switching to a console (Ctrl-Alt-F1) and then back to X (Ctrl-Alt-F7) brings the screen back to life. Launchpad bug report.
Fonts on High-Res Screens
On high-res screens (e.g. 15" 1680x1050), the default fonts are too big. You can fix this by following these steps:
- Open System->Preferences->Appearance
- Select the "Fonts" tab
- Click the "Details" button (lower right)
- Adjust the Resolution down until fonts look how you like them (96dpi is a common standard)
- Make sure you have Subpixel (LCD) Smoothing enabled
- Close the Details window and adjust the Application, Document, Desktop, etc fonts as desired (I set them all to 10).
The brightness controls (Fn-Home, Fn-End) don't seem to work reliably (if at all), and the brightness dialog box occasionally will pop up at random or "stick" on the screen, often causing the screen to flicker. Messing around with the brightness controls (Fn-Home, Fn-End) and moving the cursor around the screen will usually make the dialog to go away and the flickering stop. Launchpad bug report.
With the Nvidia card to increase/decrease brightness hit Ctrl+Alt+F1 to drop to a virtual console, change the brightness and hit Ctrl-Alt-F7 to return to Gnome. This can be done without affecting running applications.
If you install the Gnome Brightness Applet, it'll give you an easy way to change the brightness from within Gnome:
- Right-click on the top menu bar.
- Select "Add to Panel".
- Scroll down to the "System & Hardware" section.
- Highlight the "Brightness Applet" and click the "Add" button.
Using this applet often results in the "flickering screen syndrome" described above, but jiggling the brightness slider a little will cause this flickering to stop.