Installing SUSE 10 on a ThinkPad TransNote

From ThinkWiki
Revision as of 11:19, 20 July 2007 by Wehe (Talk | contribs) (added references section and link to TuxMobil)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page tells about installation of SUSE on a ThinkPad TransNote.

Introduction, general installation notes


The nvram module doesn't get loaded by default. To make the nvram module load at boot time, edit the /etc/sysconfig/kernel file to contain this line:


Power Management

SUSE 10, like any other SUSE version, uses the powersaved daemon for power management.

While the basic power management capabilities work out of the box, it gets a bit tricky when you want to enable ibm-acpi and tpb.

SUSE 10 comes with a modified Linux kernel 2.6.13, and has the individual ACPI support options compiled as modules. Trying different modules loading orders or including part of the modules into the kernel, didn't help making ibm-acpi work reliably. Hence the conclusion was to try and built a vanilla kernel.

While doing so, Linux kernel 2.6.14 was used and the ACPI option modules were built into the kernel. Unpack the kernel source into /usr/src/, relink /usr/src/linux to point to /usr/src/linux-2.6.14. Copy the .config file from the old kernels source dir. Change into the new kernels source dir and configure the kernel to include processor, ac, battery, fan, thermal and button support rather than having it compiled as modules. Compile the kernel and copy the appropriate kernel image to the /boot directory. You need to copy as well. Then edit /etc/sysconfig/kernel and adjust the line:

INITRD_MODULES="piix reiserfs"

After that, recreate the initrd using mkinitrd. There is no need to update your menu.lst file, since the symlinks get adjusted by mkinitrd.

This info needs to be more detailed.
  • Also make sure that ibm_acpi is never unloaded, since it would cause trouble. In /etc/sysconfig/powersave/common adjust the following line:
  • Powersaved complains about missing cpufreq support on boot. It might be good to switch to userspace frequency scaling. In /etc/sysconfig/powersave/cpufreq adjust the following line: