Installing Fedora Core 5 on a ThinkPad T43 (2686)
Booted Windows XP - let it convert the FAT filesystem to NTFS.
When that is finished, rebooted into Windows
- Get and install the Windows updates.
- Restore settings from old laptop Windows account using the file and settings transfer wizard.
- Configure the fingerprint scanner for login (did not try using it for powerup yet) because it's so cool.
- Make a set of Rescue and Recovery CDs (6).
- Run the filesystem defragger.
Reboot - press F1 to get to BIOS settings; adjust boot order to be just CD and then HD.
Boot Knoppix 4.0.2 CD to resize NTFS 
- select sda
- select the NTFS partition
- Action->Resize, set size to 15G
- File->Commit to run the resize and save.
Reboot back to Windows XP to check the filesystem. At boot, it wanted to run a filesystem check - let it run. (after booting, it wanted to reboot again because it thought some device had changed - went along with it).
Boot FC5 DVD
- Check media (takes a while).
- Select customized partition layout
- Deleted the IBM recovery partition 
- Create partitions:
/boot ext3 100M (default) swap 5G (I have 2G RAM) /xpshare vfat 1G (to mount to both OSs) / ext3 remaining space
- Proceed with normal installation (I chose Gnome desktop and did not install KDE; root will use Gnome, but I use Xfce - see below).
This installed kernel 2.6.15-1.2054_FC5
Log in as root
Run 'yum update' to get updates since DVD was made.
Configure X resolution for LCD
- Select menu "System->Administration->Display"
- Hardware tab choose Generic LCD Panel->LCD 1400x1050
- Settings tab set resolution to 1400x1050
- Log out and restart X w/ ctl-alt-backspace, log in again
Switch to postfix mta (my personal preference):
yum install postfix alternative --config mta (select postfix instead of sendmail)
Set the ondemand governor by adding the following to /etc/rc.local:
modprobe cpufreq_ondemand echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Set the "Access IBM" button to be hibernate by editing /etc/tpbrc and setting:
and setting that file to:
#!/bin/sh /sbin/hwclock --systohc echo -n disk > /sys/power/state /sbin/hwclock --hctosys
- Install laptop-mode
- Configure multi-head X server
- Build the fingerprint reader software and integrate into login and ssh-agent
 I chose to just remove the IBM Recovery Partition - essentially rendering the "Access IBM" button useless at boot time, in order to get the ~4G of disk space. This may have been a higher risk choice, since apparently if I ever need to reinstall Windows from the Recovery CDs I made, the only choice will be to recreate the factory disk layout, destroying my Linux installation. Life is full of choices. There are instructions on an alternate method of doing the disk layout that retains the useful recovery partition and the "Access IBM" button; use them if 4G is less important to you than being able to restore Windows without touching Linux: