Installing Fedora 8 on a ThinkPad T61p
This document outlines configuring Fedora 8 on your Thinkpad T61p. Most items will work out of the box and a base install will provide you with an almost completely working system. Due to the modular nature of the T61 there are many different configuration, please read carefully and only make the changes specific to your system.
Feel free to update this Wiki with your information however please ask questions on the Talk page.
Please look here for further informations as well:
Booting from the installation CD/DVD is only working in text mode due to the nVidia cards, you can use later vesa mode or nVidia drivers or livna nVidia drivers for X
You have following alternatives for your graphics in X:
- vesa mode, no 3D support
- nVidia drivers, download from the vendor
- nVidia drivers by livna (prefered)
The last options is provided by following packages: kmod-nvidia, xorg-x11-drv-nvidia.
Important note: the synaptics driver, which is detected by default does not give the acceleration setting to a attached mouse or the trackpoint. Please replace the section for the synaptics driver with the following one:
Section "InputDevice" Identifier "Logitech" Driver "mouse" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" Option "Protocol" "auto" EndSection
Nvidia Quadro N140 and 570M:
The brightness controls do not work, however you can switch to a virtual terminal (ctrl+alt+F1) increase or decrease the brightness and then switch back to X (ctrl+alt+F7) without disrupting the running applications. In a few rare cases switching back to X (ctrl+alt+7) may freeze your computer with a black screen so save any open documents before switching out.
When using the vesa driver the brightness controls do work. So this problem seems to be related to the nvidia driver.
Working, but volume keys do not work with the nVidia card at least.
- Volume keys.
- The sound is a bit delayed for signals like warnings, console bells, is this is a KDE problem?
Ethernet and Wlan is fully supported. Wlan will be detected as wlan0.
Suspend to RAM
Suspend to Disk / Hibernate
Has display problems (black after resume until hard reset), perhaps tuxonice should give a try.
Is supported by the thinkfinger package. Gnome and KDM (kde login manager) seem to be working quite well, KDE is not fully supported yet.
Install thinkfiner package and edit /etc/pam.d/system-auth and add the pam_thinkfinger.so module right before pam_unix.so. So your system-auth should start like this:
#%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth sufficient pam_thinkfinger.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so ...
Then save a fingerprint for each user that is allowed to log in via fingerprint. For example, for the account auser this is done with
tf-tool --add-user auser
Now whenever you are asked to enter the password for auser, you can also swipe your finger:
[anotheruser@thinkpad ~]$ su auser Password or swipe finger: [auser@thinkpad ~]$
You probably want to enroll the root account so you can just su to the superuser without entering the root password.
I had to use the PAE kernel to be able to use all 4GB, otherwise a maximum of 3GB is only seen.