Difference between revisions of "Installing Debian 5.0 (Lenny) on a ThinkPad X32"
m (enhanced introduction)
m (Installing Debian Lenny on a ThinkPad X32 moved to Installing Debian 5.0 (Lenny) on a ThinkPad X32)
Revision as of 00:49, 18 February 2009
- 1 Introduction notes
- 2 Upgrade the BIOS
- 3 Prepare the installation media
- 4 Integrated wireless
- 5 X.Org
- 6 Special keys
- 7 Bluetooth and IrDA
- 8 Power saving
- 9 SMAPI support
- 10 Sleep and suspend
- 11 UltraBase X3
- 12 Modem
- 13 System information
This wiki has tons of useful tips regarding this laptop, so this document only gathers information that is either specific to Debian Lenny or hard to find on the web. Linking to other pages on this wiki has been generally prefered to duplicating information.
The page dedicated to the X32 is another good starting point to fine-tune your GNU/Linux installation on this notebook.
- Document Linux boot options
Upgrade the BIOS
In case your X32 came with Windows installed, enjoy a BIOS upgrade before installing GNU/Linux.
Prepare the installation media
Running the installation from a USB stick was the chosen method.
- Get the
boot.img.gzfrom the Debian installer website
- Prepare a bootable USB stick, following the Debian installation guide, as the "easy way" did not work for us.
- In case you need to install using a wireless network, you are quite lucky, as Lenny's installer now supports loading firmwares during the install process; to make use of this feature, follow the Loading Missing Firmware section of the installation guide.
According to X32, various mini-PCI wifi cards may be installed. Ours came with If you have the Intel PRO/Wireless 2200BG, which identifies itself as:
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
$ lspci -n
02:02.0 0280: 8086:4220 (rev 05)
To get it working, one must install the firmware (unless it was
loaded during the installation process):
# aptitude install firmware-ipw2x00.
For this to work, you may need to include the non-free section from Debian's repositories in /etc/apt/sources.list, in case it is not enabled yet.
To enable the nice wireless led, add the following line to /etc/modprobe.d/local (creating this file if needed):
options ipw2200 led=1
First, make sure you're using the radeon driver.
First, install the mesa-utils package. Then, to see if direct
rendering is enabled, run:
$ glxinfo .
If this command outputs
direct rendering: Yes, you don't need to do anything special, as DRI is already working.
Else, read on. These instructions probably do far more than enabling DRI, but at least they work for me :)
Add the following lines to /etc/modules and /etc/initramfs-tools/modules; the goal is to ensure these kernel modules are loaded in good order, before X is started:
intel_agp agpgart drm radeon
Then add these options to the Device section in /etc/X11/xorg.conf:
Option "DRI" "true" Option "AccelMethod" "EXA" Option "AGPMode" "4" Option "AGPFastWrite" "on" Option "ColorTiling" "on" Option "EnablePageFlip" "on" Option "AGPSize" "32" Option "GARTSize" "32" Option "XAANoOffscreenPixmaps" "true" Option "EnableDepthMoves" "true"
The TrackPoint page is a good starting point to fine-tune this input device according to your needs and preferences, e.g. scrolling using the middle-mouse-button and the TrackPoint.
To enable dynamic adjusting of the Radeon card frequency rates, add this option to the Device section in /etc/X11/xorg.conf:
Option "DynamicClocks" "on"
The rovclock package allows to get/set these frequencies manually, see Rovclock for more information.
Once the acpi-support package is installed, almost all specialkeys work as expected, at least on a Gnome desktop.
Video switch key
The video switch key Sample_Fn-F7_script#Having_Fn-F7_run_a_RandR_GUI.is not bound to any action by default. To have it run a nice RandR user interface, see
Bluetooth and IrDA
One can fully disable these things by adding the following lines to /etc/modprobe.d/local:
# irda-related modules blacklist irda blacklist irtty_sir blacklist nsc_ircc blacklist sir_dev # bluetooth blacklist hci_usb
Install the cpufrequtils Debian package.
/etc/default/cpufrequtils must contain:
/etc/default/loadcpufreq must contain:
# /etc/init.d/loadcpufreq restart
# /etc/init.d/cpufrequtils restart
Just install the laptop-mode-tools package.
Adding the following lines to /etc/modprobe.d/local enables automatic power saving for the sound card and the USB ports, and prevents the wireless card from monitoring the whole universe unless told:
options snd-ac97-codec power_save=1 options usbcore autosuspend=1 options ipw2200 associate=0
To get various model-specific features, such as advanced battery monitoring, the tp_smapi kernel module must be loaded. ThinkWiki has a nice Tp_smapi dedicated page explaining how to do so. Make sure you add this module to /etc/modules so that it is loaded at boot time.
Sleep and suspend
First, install the needed acpi-support, uswsusp and hibernate packages.
It works OK with all methods: Swsusp., Gnome battery icon and hibernate command. The backend used by default is
Modifying /etc/hibernate/common.conf may be needed to achieve this:
UseDummyXServer yesto prevent DRI from being disabled on resume
- if using Gnome, uncomment
First, install the radeontool and vbetool packages.
Works out of the box.
In /etc/hibernate/ram.conf, uncomment
RadeonTool yes and comment
TryMethod sysfs-ram.conf. Then the
# hibernate-ram command should do the Right Thing.
One can optionnally enable suspend-to-both by uncommenting
TryMethod ususpend-both.conf in the same file.
Works ok with:
# pm-suspend --quirk-s3-bios --quirk-s3-mode --quirk-radeon-off}
FIXME: are the arguments needed?
The Gnome Power Manager suspend button does the Right Thing.
Sleep key (Fn-F4)
Works ok in Gnome.
UltraBase_X3 has useful information on this. In short, using the stock Debian kernel, hotswapping the UltraBase is not possible, but it is perfectly recognized if the computer is booted docked.
Install the sl-modem-source and module-assistant packages, then run:
$ m-a a-i sl-modem that will build and install the necessary (non-free) kernel module and userspace daemon.
FIXME: test the resulting packages actually work.
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
00:00.0 0600: 8086:3340 (rev 03) 00:01.0 0604: 8086:3341 (rev 03) 00:1d.0 0c03: 8086:24c2 (rev 01) 00:1d.1 0c03: 8086:24c4 (rev 01) 00:1d.2 0c03: 8086:24c7 (rev 01) 00:1d.7 0c03: 8086:24cd (rev 01) 00:1e.0 0604: 8086:2448 (rev 81) 00:1f.0 0601: 8086:24cc (rev 01) 00:1f.1 0101: 8086:24ca (rev 01) 00:1f.3 0c05: 8086:24c3 (rev 01) 00:1f.5 0401: 8086:24c5 (rev 01) 00:1f.6 0703: 8086:24c6 (rev 01) 01:00.0 0300: 1002:4c59 02:00.0 0607: 1180:0476 (rev aa) 02:00.1 0607: 1180:0476 (rev aa) 02:00.2 0c00: 1180:0552 (rev 02) 02:01.0 0200: 8086:101e (rev 03) 02:02.0 0280: 8086:4220 (rev 05)
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.70GHz stepping : 6 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1198.97 clflush size : 64 power management: