Code/tp-fancontrol.conf

1. config file for tp-fancontrol

2. The temparature shift will shift the trip points for different fan speeds.
4. A positive value means that the trip-point is at a higher temperature and
5. thus the fan is less noisy. A negative shift lets the fan start earlier.
6. The default value is 0.
8. TEMP_SHIFT=10

2. True if logging to syslog should be enabled. If zero no logging to syslog
3. is enabled. All output will appear on console. This option implies QUIET=1.
4. The default value is 1.
6. LOG_SYSLOG=0

2. If no logging to syslog is on, the output will be verbose. To be less
3. verbose set QUIET to 1. The default value is 1.
5. QUIET=1

2. The file to store the pid of the currently running fan-control daemon in.
3. The default value is /var/run/tp-fancontrol.pid
5. PIDFILE=/var/run/tp-fancontrol.pid