ATI Mobility FireGL V5200
Linux X.Org driver
Not supported by the Xorg radeon driver
It's a pitty... such a nice card!!!!!!! Yum! Yum!
Display on the internal LCD works as long as you set the monitor settings correct. Changing the driver from "ati" to "vesa" in xorg.conf will start X but with lower resolution than expected
Full resolution can be archived when all modelines are removed and mode 1600x1200 with depth 24 is selected
External VGA port
No (yes on Docking Station, working with fglrx driver
Proprietary ATI driver
Proprietary fglrx driver works since version 8.25.18, version 8.24.8 works by adding "ChipID 0x71c5" to the xorg.conf "Device" statement and fooling it into thinking it's a X1600 mobility.
The new driver 8.25.18 seems to support the card, see https://support.ati.com/ics/support/KBAnswer.asp?questionID=1643 (successfully tested with the provided autorun installation script on OpenSuSE 10.1, T60p with 15" display).
(K)ubuntu 6.06 comes with this driver and it works out of the box. However, it seems to have problems with VT Switching (Alt+Fn). Instead of switching to a console, X resets and goes back to the log in screen (This doesn't happen when using the vesa driver). Also, the pointer gets garbled sometimes in X, but this is only a minor annoyance. Dual Head (Xinerama) also works with this driver, but don't use KDE control center to enable it (use the ATi tool or edit xorg.conf manually)
I have a feeling that this card gets in the way when trying to suspend to RAM (resuming with a complete blank screen, lights are blinking, but that's it), but this can also be caused by other means.
Linux kernel Framebuffer driver