Fan control scripts

Fan control shell scripts

sh script example

#!/bin/sh

MAXTEMP=50

while [ 1 ];
do
       fan=no

       for temp in `sed s/temperatures:// < /proc/acpi/ibm/thermal`
       do
               test $temp -gt $MAXTEMP && fan=yes
       done

       command='disable'
       test "$fan" = "yes" && command='enable'
       echo $command > /proc/acpi/ibm/fan

       sleep 20
done

sh script with more features

#!/bin/sh

# fan control-script
#
# based upon ibm-acpi 0.11 (experimental=1 !)
#
# eliminates anoying "fan always on" in battery mode
# works with hysteresis (DELTA) so that always-turn-on/turn-off is avoided
# fan acivates at MAXTEMP and cools down CPU, GPU etc. to MAXTEMP-DELTA than the fan is turned off
# furthermore detects if AC is on and gives back fan control to default behaviour than
#
# one can change MAXTEMP and DELTA to individual values
# but take care of your THINKPAD don`t melt it!
#
# have fun!
# mk 05.05.05

MAXTEMP=51
DELTA=4

SWITCHTEMP=$MAXTEMP

#make sure the script doesn't leave the fan off on error
trap "echo enable > /proc/acpi/ibm/fan" EXIT

while [ 1 ];
do
  for ac in `sed s/state:// < /proc/acpi/ac_adapter/AC/state`
    do
     if [ "$ac" = "off-line" ]; then
         fan=no
         for temp in `sed s/temperatures:// < /proc/acpi/ibm/thermal`
           do
             test $temp -gt $SWITCHTEMP && fan=yes
           done

         if [ "$fan" = "yes" ]; then
           command='enable'
           SWITCHTEMP=`expr $MAXTEMP - $DELTA`
         else
           SWITCHTEMP=$MAXTEMP
           command='disable'
         fi

       else # ac-adapter on -> set fan control to standard behaviour
         command='enable'
       fi

       echo $command > /proc/acpi/ibm/fan
       sleep 15
     done 
  done

sh script with extra safety functionality

ibm_acpi usually works well. But to rely on it completely, this script provides some extra safety functionality:

1. It catches various signals and turns the fan on before it quits.
2. It turns off the fan under very strict conditions, leaving it on when unexpected errors occur.

#!/bin/sh

# july 2005 Erik Groeneveld, erik@cq2.nl
# It makes sure the fan is on in case of errors
# and only turns it off when all temps are ok.

IBM_ACPI=/proc/acpi/ibm
THERMOMETER=$IBM_ACPI/thermal
FAN=$IBM_ACPI/fan
MAXTRIPPOINT=65
MINTRIPPOINT=60
TRIPPOINT=$MINTRIPPOINT

echo fancontrol: Thermometer: $THERMOMETER, Fan: $FAN
echo fancontrol: Current `cat $THERMOMETER`
echo fancontrol: Controlling temperatures between $MINTRIPPOINT and $MAXTRIPPOINT degrees.

# Make sure the fan is turned on when the script crashes or is killed
trap "echo enable > $FAN; exit 0" HUP KILL INT ABRT STOP QUIT SEGV TERM

while [ 1 ];
do
       command=enable
       temperatures=`sed s/temperatures:// < $THERMOMETER`
       result=
       for temp in $temperatures
       do
               test $temp -le $TRIPPOINT && result=$result.Ok
       done
       if [ "$result" = ".Ok.Ok.Ok.Ok.Ok.Ok.Ok.Ok" ]; then
               command=disable
               TRIPPOINT=$MAXTRIPPOINT
       else
               command=enable
               TRIPPOINT=$MINTRIPPOINT
       fi
       echo $command > $FAN
       # Temperature ramps up quickly, so pick this not too large:
       sleep 5
done

Init script example

#! /bin/sh

N=/etc/init.d/fan

set -e

case "$1" in
 start)
       # make sure privileges don't persist across reboots
       if [ -d /var/run/fan ] && [ "x`ls /var/run/fan`" != x ]
       then
               touch -t 198501010000 /var/run/fan/*
       fi
       fan.sh &    # Script from above
       ;;
 stop|reload|restart|force-reload)
       killall fan.sh
       echo enable > /proc/acpi/ibm/fan
       ;;
 *)
       echo "Usage: $N {start|stop|restart|force-reload}" >&2
       exit 1
       ;;
esac

exit 0

Init script example for gentoo

Assume one of the above control scripts is /usr/sbin/ibm-fancontrold, for gentoo use the following init script in /etc/init.d/ibm-fancontrol. Copy the script to /etc/init.d/ibm-fancontrol, then do

# rc-update add ibm-fancontrol default

This will add the init script to the default runlevel.

#!/sbin/runscript
# 2005 Gilbert Tiefengruber
# Distributed under the terms of the GNU General Public License v2 
depend() {
        need localmount
}
checkconfig() {
        if [ ! -e /proc/acpi/ibm/fan ]; then
                eerror "The ibm_acpi module must be loaded with (experimental=1)"
                return 1
        fi
} 
start() {
        checkconfig || return 1
        ebegin "Starting ibm-fancontrold"
        start-stop-daemon --quiet -p /var/run/ibm-fancontrold.pid -m -b --start -a /usr/sbin/ibm-fancontrold
        eend ${?}
} 
stop() {
        ebegin "Stopping ibm-fancontrold"
        start-stop-daemon --stop --quiet -p /var/run/ibm-fancontrold.pid
        eend ${?}
}

fanctrld

fanctrld is a daemon (written in C) that controls the Thinkpad's fan. The basic approach is to monitor both temperature and fan speed. The fan is enabled when a certain temperature is exceeded, and disabled when the BIOS slows down the fan below a certain speed.