Talk:Ericsson F3507g Mobile Broadband Module

From ThinkWiki
Revision as of 22:35, 25 September 2009 by Zulu (Talk | contribs)
Jump to: navigation, search

Sorry for adding it here. I have Toshiba R600 with the very same device, however those instructions don't work:

AT+CPIN?
ERROR
AT+CFUN=1
OK
AT*E2GPSCTL=1,10,1
ERROR

So at least GPS is inaccessible. Any ideas? Thanks--Zulu 21:35, 25 September 2009 (UTC)


If there is a way to query for IMEI and ICCID of the F3507g module under Linux, perhaps someone who knows how to do it could describe it here. I believe it applies to the subject very well. --Mloskot 17:19, 4 March 2009 (UTC)

you can get IMEI by sending

AT+CGSN

IMSI by sending

AT+CIMI

ICCID by sending

AT*E2SSN

to /dev/ttyACM1 in minicom, ICCID should also be printed on your SIM. --newhren 11 April 2009


Regarding the issue with the device disappearing under Windows Vista after using it with Linux I had/have the same experience. The first time I assumed the card was broken and sent the laptop to the Lenovo repair center which actually replaced it. With the new card, the same things happened: after booting Linux and then booting Vista again, the device did not appear in the device manager. However, I could enable it with thinkpad_acpi under Linux. So it seems that when it is disabled using ACPI under Linux, the Vista driver is not able to enable it. Robertj 11:33, 28 August 2009 (UTC)