Code/tp-theft
- !/usr/bin/perl
- tp-theft v0.5.1
- (http://thinkwiki.org/wiki/Script_for_theft_alarm_using_HDAPS)
- Provided under the GNU General Public License version 2 or later or
- the GNU Free Documentation License version 1.2 or later, at your option.
- See http://www.gnu.org/copyleft/gpl.html for the Warranty Disclaimer.
- This script uses the HDAPS accelerometer found on recent ThinkPad models
- to emit an audio alarm when the laptop is tilted. In sufficiently
- populated environments, it can be used as a laptop theft deterrent.
- Uses a state machine and some heuristics to reduce false alarms.
- By default the alarm will be activated only when the KDE screen saver is
- locked. If you you open the laptop lid (or press the lid button) shortly
- before or after the beginning of movement, the alarm will be suspended
- (except for a brief warning) and you will get a few seconds of grace to
- unlock the screen saver. You can disable this functionality by passing
- the "--arm" parameter, or by setting $use_kde=0 and $use_lid=0.
- There is also an option to track a BlueTooth device (e.g., a mobile phone).
- In this case, the alarm is activated (and optionally, the KDE desktop is
- locked) whenever the device is turned off or too distant for a given period,
- and deactivated when the BlueTooth device is nearby. You need to provide the
- device's BD address. If both KDE screen saver and BlueTooth checking are
- enabled, then the alarm will be activated when *either* the screensaver
- is enabled or the BlueTooth device is amiss.
- To control the sound and blinkenlights, and adjust the alarm activation
- parameters, see the variables below.
use strict; use warnings; use FileHandle; use IO::Pipe; use Time::HiRes qw(sleep time); use POSIX qw(:errno_h :signal_h);
- Siren volume and content
- Alarm audio volume (0..100)
my $alarm_volume = 70;
- Alarm command (default: synthesize a siren for 1.0 seconds):
my $alarm_cmd = "sox -t nul /dev/null -t wav -s -w -c2 -r48000 -t raw - synth 1.0 sine 2000-4000 sine 4000-2000 | aplay -q -fS16_LE -c2 -r48000";
- my $alarm_cmd = "aplay keep_your_hands_off_me.wav";
- Warning audio volume (0..100)
my $warn_volume = 45;
- Alarm command (default: synthesize a biref siren):
my $warn_cmd = "sox -t nul /dev/null -t wav -s -w -c2 -r48000 -t raw - synth 0.10 sine 2000-4000 sine 4000-2000 | aplay -q -fS16_LE -c2 -r48000";
- my $warn_cmd = "aplay warning.wav";
- Set ibm_acpi volume (0..15), if ibm_acpi is loaded with "experimental=1".
- Combining $acpi_volume=15 and $alarm_volume=100 makes the alarm
- dangerously loud.
my $acpi_volume = 10;
- Blink system LEDs when alarm activated?
my $use_led = 'safe'; # 0=off, 'safe'=only LEDs whose state you can recover, 'all'=pretty blinkenlights!
- Blink ThinkLight when alarm activated?
my $use_light = 0; # 0=off, 1=on
- Activation control
- Tilt threshold (increase value to decrease sensitivity):
my $thresh = 0.20;
- Minimum movement duration between warning and alarm:
my $min_hold = 1.3;
- When armed, any movement triggers alarm. How long should it remain armed?
my $arm_persist = 6;
- After this many seconds of no movement, will allow a grace period again:
my $grace_relax = 15;
- Activate according to KDE screen saver? Otherwise, always active:
my $use_kde = 1;
- When screen saver locked, wait this long before activation:
my $kde_lock_delay = 8;
- Provide grace period if laptop lid is opened?
my $use_lid = 1;
- Opening a lid will grant this many seconds of grace (once):
my $lid_grace = 7;
- Lid must to be opened within this time to hold/pause alarm:
my $lid_grace_window = 8;
- Alarm will hold off this long when grace is available:
my $lid_hold = 3;
- Control arming according by presence of a BlueTooth token
my $use_bluetooth = 0;
- Lock KDE screen saver when BlueTootk is not present?
my $bluetooth_lock_kde = 1;
- BD address of BlueTooth token (use "hcitool scan" to find this)
my $bluetooth_token_addr = '00:00:00:00:00:00';
- Consider token amiss when its received signal leve is below this (see "hcitool rssi")
my $bluetooth_min_rssi = -10;
- Activate if BlueTooth token not seen this long:
my $bluetooth_activate_period = 12;
- Disactivate if BlueTooth token seen this recently:
my $bluetooth_deactivate_period = 5;
- If BlueTooth detection activated KDE lock, don't do it again for this long
my $bluetooth_lock_kde_interval = 30;
- If BlueTooth wasn't polled for this long, disregard recent history
my $bluetooth_reset_period = 10;
- Other setup vars
my $interval = 0.1; # sampling intervalm in seconds my $depth = 10; # number of recent samples to analyze my $verbose = 2; # 0=nothing, 1=alarms, 2=state transitions, 3=everything my $kde_check_interval = 1.5; # KDE screen saver check is expensive my $bluetooth_sleep = 1; # Sleep interval in BlueTooth check loop
my $pos_file = '/sys/devices/platform/hdaps/position'; my $lid_file = '/proc/acpi/button/lid/LID/state'; my $led_file = '/proc/acpi/ibm/led'; my $light_file = '/proc/acpi/ibm/light'; my $bay_file = '/proc/acpi/ibm/bay'; my $volume_file = '/proc/acpi/ibm/volume'; # load ibm_acpi with experimental=1 my $bluetooth_file = '/proc/acpi/ibm/bluetooth'; # load ibm_acpi with experimental=1
my $alsactl = '/usr/sbin/alsactl'; my $amixer = 'amixer'; my $kdesktop_lock = '/usr/bin/kdesktop_lock'; my $hcitool = '/usr/bin/hcitool'; my $l2ping = '/usr/bin/l2ping';
- Utility functions
sub say {
my ($verb, $what) = @_; print(gmtime().": $what\n") if $verb<=$verbose;
}
sub slurp { # read whole file
my ($filename) = @_; local $/; my $fh = new FileHandle($filename,"<") or return; return <$fh>;
}
sub burp { # write whole file
my ($filename) = shift; my $fh = new FileHandle($filename,">") or die "Can't open $filename for writing: $!"; print $fh @_ or die "Can't write to $filename: $!"; close $fh or die "Can't close $filename after writing: $!";
}
sub stddev { # standard deviation of list
my $sum=0;
my $sumsq=0;
my $n=$#_+1;
for my $v (@_) {
$sum += $v;
$sumsq += $v*$v;
}
return sqrt($n*$sumsq - $sum*$sum)/($n*($n-1));
}
sub frac {
my ($x) = @_; return $x-int($x);
}
sub max {
return $_[0] > $_[1] ? $_[0] : $_[1];
}
my $alarm_file; # flags ongoing alarm (and also stores saved mixer settings)
sub sound_alarm {
# Sound alarm. Forks bash code which sets given volumes, runs the given
# command, and then restores the given volumes to their saved values.
my ($name, $volume, $acpi_volume, $cmd) = @_;
return if (defined($alarm_file) && -f $alarm_file);
say(1,$name);
$alarm_file = `mktemp /tmp/tp-theft-tmp.XXXXXXXX` or die "mktemp: $?";
chomp($alarm_file);
my ($acpi_vol_file, $acpi_vol_set, $acpi_vol_restore);
if ($_=slurp($volume_file) and m/^level:\s+(\d+)\n/) {
$acpi_vol_file = $volume_file;
$acpi_vol_set = "level $acpi_volume";
$acpi_vol_restore = "level $1";
if (m/^mute:\s+on$/m) {
$acpi_vol_set = "up,".$acpi_vol_set; # unmute first
$acpi_vol_restore .= ",mute"; # mute last
}
} else {
$acpi_vol_file='/dev/null'; $acpi_vol_set=; $acpi_vol_restore=;
}
system('/bin/bash', '-c', <<"EOF")==0 or die "Failed: $?";
( trap \"echo '$acpi_vol_restore' > $acpi_vol_file; sleep 0.1;
$alsactl -f $alarm_file restore;
rm -f $alarm_file
\" EXIT HUP QUIT TERM
$alsactl -f $alarm_file store && # store ALSA
echo '$acpi_vol_set' > $acpi_vol_file && sleep 0.1 && # set ACPI
$amixer -q set Master $volume% unmute && # set ALSA Master
$amixer -q set PCM 100% unmute && # set alsa PCM
$cmd ) & # invoke command
EOF }
- KDE screen saver lock check
if ($use_kde) { # Basic sanity check
`/sbin/pidof kdesktop`; $?==0 or die "Can't use KDE, it's not running.\n";
}
sub kdesktop_lock_status {
# See if kdesktop_lock is running and check its cmdline and automatic lock delay
my $bin = $kdesktop_lock;
my $pids = `/sbin/pidof $bin`;
return 'off' unless $?==0;
for my $pid (split(/\s+/,$pids)) {
next unless $pid =~ m/^\d+$/;
# Attached to display ":0" or "localhost:0"?
my $environ = slurp("/proc/$pid/environ") or next;
my $good=0; my $home;
for (split(/\x00/,$environ)) {
$good=1 if m/^DISPLAY=(localhost)?:0$/;
$home=$1 if m/^HOME=(.+)$/; # also remember its $HOME
}
next unless $good;
# Check command line
my $cmdline = slurp("/proc/$pid/cmdline") or next;
$cmdline =~ m/^[^\x00]+\x00(?:([^\x00]+)\x00)?/ or die "Cannot parse $bin command line\n";
if (!defined($1)) {
# Read KDE screensaver lock time
defined($home) or die "Cannot find HOME in environment of $bin process";
my $rc_path = "$home/.kde/share/config/kdesktoprc";
my $rc = new FileHandle($rc_path,"<") or die "Error opening $rc_path: $!";
while (<$rc>) { m/^LockGrace=(\d+)$/ and return ('auto', $1/1000.0); };
die "Cannot parse $rc_path";
} elsif ($1 eq '--forcelock') {
return "force";
}
}
return 'off';
}
my $last_kls_update = 0; # time of last update my $last_kls = 'init'; # last state seen my $last_kls_start; # when that state started my @last_kls_opwhy = ();
sub check_kde_lock {
# De/activate according to KDE screen saver:
my $now=time();
return @last_kls_opwhy if $now < $last_kls_update + $kde_check_interval;
my ($kls, $auto_delay) = kdesktop_lock_status();
$last_kls_update = time();
if ($kls ne $last_kls) {
$last_kls = $kls;
$last_kls_start = $now;
}
if ($kls eq 'off') { # no screen saver
@last_kls_opwhy = (0, 'KDE screen saver not locked');
} elsif ($kls eq 'auto') { # screen saver with automatic lock
if ($now >= $last_kls_start + $auto_delay + $kde_lock_delay) {
@last_kls_opwhy = (1, 'KDE screen saver is auto-locked');
}
} elsif ($kls eq 'force') { # screen saver with forced lock
if ($now >= $last_kls_start + $kde_lock_delay) {
@last_kls_opwhy = (1, 'KDE screen saver is forced-locked');
}
}
return @last_kls_opwhy;
}
- Lock KDE desktop
sub force_kde_lock {
return if ($last_kls eq 'auto' or $last_kls eq 'force');
say(1, "Locking KDE desktop");
# system('dcop kdesktop KScreensaverIface lock') or die "Cannot lock KDE dekstop: $!"
my %oldENV = %ENV;
my $kde_pids = `/sbin/pidof -x /usr/bin/startkde`;
for my $kde_pid (split(/\s+/,$kde_pids)) {
my $kde_env = slurp("/proc/$kde_pid/environ") or next;
%ENV = ();
for (split(/\x00/,$kde_env)) {
m/^(DISPLAY|HOME|XAUTHORITY|USER|DBUS_SESSION_BUS_ADDRESS)=(.+)$/
and $ENV{$1} = $2;
}
next unless defined($ENV{DISPLAY}) and $ENV{DISPLAY} =~ m/^:/;
system('dcop kdesktop KScreensaverIface lock') and die "Cannot lock KDE dekstop: $!"
}
my %ENV = %oldENV;
}
- Lid checking
if ($use_lid) { # sanity check
slurp($lid_file) or die "Can't use lid via $lid_file: $!";
}
my $last_lid_status = 'open'; my $last_lid_open = 0;
sub check_lid {
my $lid = slurp($lid_file) or return;
if ($lid =~ m/state: *open$/) {
$last_lid_open = time() if ($last_lid_status eq 'closed');
$last_lid_status = 'open';
} else {
$last_lid_status = 'closed';
}
return $last_lid_status;
}
- LED blinking
- Flash LEDs
sub led_activate {
return if $use_led eq '0';
my $ledf = new FileHandle($led_file,">");
if (!defined($ledf)) {
print "Cannot open $led_file, disabling LED indicator: $!\n";
$use_led = '0';
return;
}
$ledf->autoflush(1);
my $base = time()*2.5;
print $ledf '0 '.((frac($base)>0.7)?'on':'off')."\n"; # power
if ($use_led eq 'all') { # battery -- we can't recover these
print $ledf '1 '.((frac($base+0.50)>0.7)?'on':'off')."\n"; # battery, orange
print $ledf '2 '.((frac($base+0.25)>0.7)?'on':'off')."\n"; # battery, yellow
}
print $ledf '4 '.((frac($base)>0.7)?'on':'off')."\n"; # bay
print $ledf '7 '.((frac($base+0.725)>0.7)?'on':'off')."\n"; # standby
}
- Restore LEDs to normal state
sub led_restore {
return if $use_led eq '0';
my $ledf = new FileHandle($led_file,">") or die "Cannot open $led_file: $!\n";
$ledf->autoflush(1);
print $ledf "0 on\n"; # power=on
if ($use_led eq 'all') { # battery -- we can't recover these
print $ledf "1 on\n";
print $ledf "2 on\n";
}
print $ledf "7 off\n"; # power=off
if (my $baydata = slurp($bay_file)) {
my $is_bay = ($baydata =~ m/^status:\s*occupied$/m)?'on':'off';
print $ledf "4 $is_bay\n"; # reset to correct status
} else {
print $ledf "4 on\n"; # force bay on, we don't know correct status
}
}
- ThinkLight blinking
sub light_activate {
return if $use_light eq '0';
my $lightf = new FileHandle($light_file,">");
if (!defined($lightf)) {
print "Cannot open $light_file, disabling ThinkLight indicator: $!\n";
$use_light = '0';
return;
}
my $base = time()/2;
print $lightf (check_lid() eq 'open' && ((frac($base)<0.1)?'on':'off'))."\n";
}
sub light_restore {
return if $use_light eq '0'; my $lightf = new FileHandle($light_file,">") or die "Cannot open $light_file: $!\n"; print $lightf "off\n"; # ThinkLight
}
- BlueTooth token detection
{
my $temporary_bt = 0; my $bt_pid; my $bt_pipe; my $bluetooth_last_seen = 0; # last time we saw the BlueTooth token my $bluetooth_last_read = 0; # last time we polled the BlueTooth child process my $bluetooth_ignore_missing_until = time() + $bluetooth_reset_period;
if ($use_bluetooth) {
# If BlueTooth is disabled, temporarily enable it
slurp($bluetooth_file) or die "Can't control bluetooth via $bluetooth_file: $!";
my $bt_status = slurp($bluetooth_file);
$temporary_bt = $bt_status =~ m/status:[\t]*disabled/;
if ($temporary_bt) {
say(1, 'BlueTooth was disabled, enabling');
burp($bluetooth_file, "enable\n");
sleep(1);
}
}
sub bluetooth_reset { # disregard recent (negative) history
$bluetooth_ignore_missing_until = max($bluetooth_ignore_missing_until, time() + $bluetooth_reset_period);
}
sub check_bluetooth {
if (!defined($bt_pid)) {
# Create new child process, which will loop checking
# for the token. Each time it sees the token, it writes
# the current time to a pipe that's read by the main process.
$bt_pipe = new IO::Pipe;
$bt_pid = fork();
die "Cannot fork BlueTooth check: $!" unless defined($bt_pid);
if (!$bt_pid) {
# Child
$bt_pipe->writer();
$bt_pipe->autoflush(1);
open(STDOUT, ">/dev/null");
open(STDERR, ">/dev/null");
while(1) {
# Is the BlueTooth token reachable?
my $res = system($l2ping,'-c','1','-t',1,$bluetooth_token_addr);
die "Failed invoking l2ping: $!\n" if $res&0xFF;
if ($res==0) {
# Is the BlueTooth sufficiently close, as judged by signal strength?
$res = `$hcitool rssi $bluetooth_token_addr`;
if ($?==0 && $res =~ m/^RSSI return value: (-?[0-9]+)$/) {
my $rssi = $1;
printf $bt_pipe "%d\n", time() if ($rssi > $bluetooth_min_rssi);
}
}
sleep($bluetooth_sleep);
}
}
$bt_pipe->reader();
$bt_pipe->blocking(0);
}
while (1) {
my $res = <$bt_pipe>;
last if ($!==POSIX::EAGAIN); # busy
die "Error reading from BlueTooth check child process\n" unless defined($res);
$bluetooth_last_seen = $res;
}
my $now = time();
bluetooth_reset() if ($now > $bluetooth_last_read + $bluetooth_reset_period);
$bluetooth_last_read = time();
if ($now > max($bluetooth_last_seen + $bluetooth_activate_period, $bluetooth_ignore_missing_until)) {
if ($bluetooth_lock_kde) {
force_kde_lock();
$bluetooth_ignore_missing_until = max($bluetooth_ignore_missing_until, time() + $bluetooth_lock_kde_interval);
}
return (1, "BlueTooth token not seen for $bluetooth_activate_period seconds, activating.");
} elsif ($now < $bluetooth_last_seen + $bluetooth_deactivate_period) {
return (0, "BlueTooth token seen during last $bluetooth_deactivate_period seconds, deactivating.");
}
return ();
}
sub bluetooth_restore {
if ($temporary_bt) {
say(1, 'Disabling BlueTooth');
burp($bluetooth_file, "disable\n");
}
if ($bt_pid) {
kill(SIGTERM, $bt_pid);
waitpid($bt_pid, 0);
}
}
}
- Main code
my $state; # See state machine in main loop my %state_names=(0 =>'disabled ',
0.5=>'activating ',
1 =>'active+grace',
2 =>'active ',
3 =>'hold+grace ',
4 =>'armed+grace ',
5 =>'hold ',
6 =>'armed ',
7 =>'armed-force ' );
my $state_end = 0; my $last_tilt = 0; my $arm_forced = 0; my (@XHIST, @YHIST); # sensor history
sub set_state {
my ($st, $why) = @_;
say(2, "state=[".$state_names{$st}."] ($why)");
(@XHIST, @YHIST) = () if $st==0.5;
led_restore() and light_restore() if defined($state) && $st==0;
$state = $st;
}
sub get_pos {
my $pos = slurp($pos_file);
return undef if $!{EBUSY};
die "Can't open HDAPS file $pos_file: $!\n" if (!defined($pos) || $!);
$pos =~ m/^\((-?\d+),(-?\d+)\)$/ or die "Can't parse $pos_file content\n";
return ($1,$2);
}
for (@ARGV) {
m/^--arm/ && do { $arm_forced=1; $use_lid=0; $use_kde=0; last; };
die "Unknown parameter\n";
}
set_state( ($use_kde || $use_bluetooth) ? 0 : 0.5, "init");
eval {
$SIG{'HUP'}=$SIG{'INT'}=$SIG{'ABRT'}=$SIG{'QUIT'}=$SIG{'SEGV'}=$SIG{'TERM'} = sub { die "signal\n" };
while (1) {
sleep(($state==0 && $use_kde) ? $kde_check_interval : $interval);
check_lid() if $use_lid;
# Check screensaver and BlueTooth. Activate if either says so,
# otherwise deactivate if either says so.
my ($op1, $why1); ($op1, $why1) = check_kde_lock() if $use_kde;
my ($op2, $why2); ($op2, $why2) = check_bluetooth() if $use_bluetooth;
my ($op, $why) = ( !defined($op1) || ( defined($op2) && $op2>$op1 ) ) ? ($op2,$why2) : ($op1,$why1);
if (defined($op)) {
if ($op==1 && $state==0) { set_state(0.5, $why); }
if ($op==0 && $state>0) { set_state(0, $why); bluetooth_reset(); }
}
next unless $state>0;
# Collect and analyze sensor data:
my $now = time();
my $tilted;
my ($x,$y) = get_pos() or next; # Hopefully the error is transient
push(@XHIST,$x); push(@YHIST,$y);
if ($state>0.5) {
shift(@XHIST); shift(@YHIST);
my $xdev = stddev(@XHIST);
my $ydev = stddev(@YHIST);
say(3,"X: v=$xdev (".join(',',@XHIST).") Y: v=$ydev (".join(",",@YHIST).")");
$tilted = ($xdev>$thresh || $ydev>$thresh);
$last_tilt = $now if $tilted;
}
# Decide: state machine transitions
if ($state==0.5) { # ACTIVATING (collecting motion data will soon activate)
if ($#XHIST >= $depth && $#YHIST >= $depth) {
set_state($arm_forced?7:$use_lid?1:2, "finished data collection");
}
} elsif ($state==1) { # ACTIVE+GRACE (quiet for a long time, awaiting movement)
if ($tilted) {
set_state(3, "motion detected, holding for $lid_hold seconds, open lid for grace");
$state_end = $now + $lid_hold;
sound_alarm("WARNING", $warn_volume, $acpi_volume, $warn_cmd);
}
} elsif ($state==2) { # ACTIVE (short for a shorter time, awaiting movement)
if ($tilted) {
set_state(5, "motion detected, holding for $min_hold seconds");
$state_end = $now + $min_hold;
sound_alarm("WARNING", $warn_volume, $acpi_volume, $warn_cmd);
} else {
if ($use_lid && ($now > $last_tilt + $grace_relax )) {
set_state(1, "$grace_relax seconds since last motion, so allowing grace again");
}
}
} elsif ($state==3) { # HOLD+GRACE (recent movemvent, but still holding off alarm; after long quiet)
if ($now < $last_lid_open + $lid_grace) {
set_state(5, "lid opened, holding for $lid_grace seconds grace period");
$state_end = $now + $lid_grace;
} elsif ($now >= $state_end) {
my $delta = $lid_grace_window - $lid_hold;
$state_end = $now + $delta;
set_state(4, "hold ended, arming but allowing grace for $delta more seconds");
}
} elsif ($state==4) { # ARMED+GRACE (armed, but recently quiet so allow grace if lid opened)
if ($now < $last_lid_open + $lid_grace) {
set_state(5, "lid opened, holding for $lid_grace seconds grace period");
$state_end = $now + $lid_grace;
} elsif ($now >= $state_end) {
set_state(6, "grace window ended");
}
} elsif ($state==5) { # HOLD (recent movement, but still holding off alarm; there was recent action)
if ($now >= $state_end) {
set_state(6, "hold ended, arming");
}
} elsif ($state==6) { # ARMED (sound alarm on any movement)
if ($now > $last_tilt + $arm_persist) {
set_state(2, "no motion for $arm_persist seconds, unarming");
}
}
# LEDs:
if ($state>0) {
led_activate(); light_activate();
}
# Alarm:
if (($state==4 || $state==6 || $state==7) && $tilted) {
sound_alarm("ALARM", $alarm_volume, $acpi_volume, $alarm_cmd);
}
}
};
print "Shutting down.\n" if $verbose>1; led_restore() and light_restore() if ($state>0); bluetooth_restore(); die "$@" if $@;
