Difference between revisions of "Sleep mode"

From ThinkWiki
Jump to: navigation, search
(suspend2 version of RediSafe)
m
Line 3: Line 3:
 
Some ThinkPads also have the RediSafe suspend mode. This mode requires the presence of a hibernation file. To protect your work when you run out of battery power, this mode writes the status of the system to the hibernation file on the hard disk. Similar functionality can be achieved using [[Software Suspend 2]], by setting <tt>PowerdownMethod 3</tt> in {{path|/etc/hibernate/hibernate.conf}}.
 
Some ThinkPads also have the RediSafe suspend mode. This mode requires the presence of a hibernation file. To protect your work when you run out of battery power, this mode writes the status of the system to the hibernation file on the hard disk. Similar functionality can be achieved using [[Software Suspend 2]], by setting <tt>PowerdownMethod 3</tt> in {{path|/etc/hibernate/hibernate.conf}}.
  
See [[How to make use of Power Management features]] to learn about getting suspend mode and other power-saving modes to function on a Thinkpad running Linux.
+
See [[How to make use of Power Management features]] to learn about getting suspend mode and other power-saving modes to function on a ThinkPad running Linux.
  
  

Revision as of 03:33, 24 January 2006

The suspend mode is one of three power-saving modes for the ThinkPads. In this mode, the LCD screen (and the external monitor, if attached) is turned off and all tasks are stopped and stored in memory in order to save power. You can enter this mode by pressing FnF4 or by configuring your computer to enter standby mode automatically after a chosen duration of inactivity. The computer can also go into suspend mode when closing the lid, unless it has been set up not to. This may be useful when you are working with an external monitor and you want to close the lid without going into suspend mode. When in suspend mode, the suspend indicator light be turned on. To resume operation, press Fn.

Some ThinkPads also have the RediSafe suspend mode. This mode requires the presence of a hibernation file. To protect your work when you run out of battery power, this mode writes the status of the system to the hibernation file on the hard disk. Similar functionality can be achieved using Software Suspend 2, by setting PowerdownMethod 3 in /etc/hibernate/hibernate.conf.

See How to make use of Power Management features to learn about getting suspend mode and other power-saving modes to function on a ThinkPad running Linux.


See also

External resources

Using and understanding the IBM ThinkPad advanced power management features