Difference between revisions of "Talk:Problem with failing memory slot"
(Confirming) |
|||
Line 4: | Line 4: | ||
OK, I have not been able to get the pictures I took (at least not yet), but I did find someone else who did something similar, with a rolled up piece of paper this past may on thinkpads.com. [http://forum.thinkpads.com/viewtopic.php?t=13262&postdays=0&postorder=asc&start=30&sid=d4be04d5b8a2cfbc88fed78d01135581 Link] --[[User:Breaklog|Breaklog]] 02:55, 8 October 2006 (CEST) | OK, I have not been able to get the pictures I took (at least not yet), but I did find someone else who did something similar, with a rolled up piece of paper this past may on thinkpads.com. [http://forum.thinkpads.com/viewtopic.php?t=13262&postdays=0&postorder=asc&start=30&sid=d4be04d5b8a2cfbc88fed78d01135581 Link] --[[User:Breaklog|Breaklog]] 02:55, 8 October 2006 (CEST) | ||
+ | |||
+ | == Confirming == | ||
+ | |||
+ | With the second slot failing after some time / inserting new Ram-module this solution worked out for me fine. I rolled a piece of paper max 2mm and placed it in the middle of the module parallel to the slot. make it thin enough so you don't press it to hard, and make it small enough because of ventilation. |
Revision as of 15:09, 8 April 2007
Can anyone confirm that this solution works? Why a strip of metal (Could cardboard or some other material be used)? What size of an object is needed to make the RAM connect?
Can the person who wrote it confirm it? I have done it 2x, and have a few pictures. Perhaps Ill post them on my site later today. The first time, I used a strip of metal, and the second time, I used a tightly rolled up piece of paper. The paper method turned out to be more stable, as the metal caused the door to warp a bit. --breaklog
OK, I have not been able to get the pictures I took (at least not yet), but I did find someone else who did something similar, with a rolled up piece of paper this past may on thinkpads.com. Link --Breaklog 02:55, 8 October 2006 (CEST)
Confirming
With the second slot failing after some time / inserting new Ram-module this solution worked out for me fine. I rolled a piece of paper max 2mm and placed it in the middle of the module parallel to the slot. make it thin enough so you don't press it to hard, and make it small enough because of ventilation.