Difference between revisions of "How to configure the TrackPoint"

From ThinkWiki
Jump to: navigation, search
(remove optional parameters)
 
(49 intermediate revisions by 26 users not shown)
Line 3: Line 3:
 
|style="vertical-align:top" |Below are several ways of configuring the kernel psmouse driver for controlling extended TrackPoint features.
 
|style="vertical-align:top" |Below are several ways of configuring the kernel psmouse driver for controlling extended TrackPoint features.
 
|}
 
|}
 +
On a '''Modern''' distribution (like Fedora, Ubuntu or OpenSUSE) you will want to use xinput or one of the graphical front ends. For distributions that are lagging a bit (e.g. Debian Lenny and PCLOS '09) you may still want to use the old xorg config method.
  
 
=Configuration using xinput=
 
=Configuration using xinput=
 
If you want to modify changes on the fly, you can do so with {{cmd|xinput|}} (part of the optional xorg-x11-apps rpm on Fedora).
 
If you want to modify changes on the fly, you can do so with {{cmd|xinput|}} (part of the optional xorg-x11-apps rpm on Fedora).
Note that these changes are not saved when the xserver is restarted.
+
Note that these changes are not saved when the xserver is restarted. However, you can add the lines e.g. in your  {{cmd|.xsessionrc|}} (depends on your distribution) so they are executed every time X starts.
  
 
To query the available options
 
To query the available options
  xinput list-props '"TPPS/2 IBM TrackPoint"'
+
  xinput list-props "TPPS/2 IBM TrackPoint"
  
 
More information can be found in the man-pages for evdev
 
More information can be found in the man-pages for evdev
Line 15: Line 16:
  
 
To enable vertical scrolling
 
To enable vertical scrolling
  xinput set-prop '"TPPS/2 IBM TrackPoint"' "Evdev Wheel Emulation" 1
+
  xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 1
  xinput set-prop '"TPPS/2 IBM TrackPoint"' "Evdev Wheel Emulation Button" 2
+
  xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 2
  xinput set-prop '"TPPS/2 IBM TrackPoint"' "Evdev Wheel Emulation Timeout" 200
+
  xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Timeout" 200
 +
 
 +
To enable horizontal scrolling in addition to vertical scrolling
 +
 
 +
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Axes" 6 7 4 5
  
 
To enable middle button emulation (using left- and right-click simultaneously)
 
To enable middle button emulation (using left- and right-click simultaneously)
  xinput set-prop '"TPPS/2 IBM TrackPoint"' "Evdev Middle Button Emulation" 1
+
  xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Middle Button Emulation" 1
  xinput set-prop '"TPPS/2 IBM TrackPoint"' "Evdev Middle Button Timeout" 50
+
  xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Middle Button Timeout" 50
 +
 
 +
== old method using xinput set-int-prop ==
 +
 
 +
Previous approaches needed to find the device's numeric id instead of simply using the name, and used "set-int-prop" instead of "set-prop", which required specifying the format (8-bit, 16-bit etc.).
 +
===Example: openSUSE 11.2 and ThinkPad USB Keyboard with TrackPoint ===
 +
 
 +
xinput list
 +
will show two "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint." with two different ids. Use the id with Axis 0 and Axis 1 items.
 +
 
 +
Suppose the id was 12. The following will enable the trackpoint scrolling:
 +
 
 +
xinput set-int-prop 12 "Evdev Wheel Emulation" 8 1
 +
xinput set-int-prop 12 "Evdev Wheel Emulation Button" 8 2
 +
xinput set-int-prop 12 "Evdev Wheel Emulation Timeout" 16 200
 +
 
 +
To do this in a script without knowing the numeric id in advance, the following will run through input devices and set properties on all those that support Evdev Wheel Emulation, assumed to be the Trackpoint(s).
 +
 
 +
#!/bin/sh
 +
xinput list | sed -ne 's/^[^ ][^V].*id=\([0-9]*\).*/\1/p' | while read id
 +
do
 +
        case `xinput list-props $id` in
 +
        *"Middle Button Emulation"*)
 +
                xinput set-int-prop $id "Evdev Wheel Emulation" 8 1
 +
                # etc.
 +
                ;;
 +
        esac
 +
done
 +
 
 +
and save it with any name such as trackPointScrolling.sh, and make it executable:
 +
chmod +x trackPointScrolling.sh
  
 +
It can then be run via $ ./trackPointScrolling.sh or in a startup script.
  
{{Todo|some other examples}}
+
= Graphical Frontends =
 +
If you are using GNOME, you might want to use [http://live.gnome.org/GPointingDeviceSettings GPointing Device Settings] or [http://tpctl.sourceforge.net/configure-trackpoint.html configure-trackpoint] as a graphical frontends.
 +
=== GPointing Device Settings ===
 +
It is available for Fedora 12, Ubuntu 9.10 and Debian Squeeze in the standard package repositories
 +
{{NOTE|Unfortunately it seems no longer maintained, and does not work properly with GNOME3 [[https://bugzilla.redhat.com/show_bug.cgi?id=710053 bug]]}}
  
= Configuration using Gnome=
+
[[image:Screenshot-GPointing Device Settings-TrackPoint.png]]
If you are using GNOME, you might want to use [http://tpctl.sourceforge.net/configure-trackpoint.html configure-trackpoint] as a graphical frontend. ''([http://my.opera.com/thibi/blog/thinkpad-trackpoint-configuration-under-linux Debian/Ubuntu configuration tutorial.])''
+
 
 +
=== configure-trackpoint ===
 +
To install it in Ubuntu run ...
 +
sudo apt-get install sysfsutils
 +
...and then download and install the deb [http://sourceforge.net/projects/tpctl/ here]. Note that saved settings are not restored after reboot in Lucid Lynx. See methods below to make settings permanent.
  
 
= Configuration using DevKit =
 
= Configuration using DevKit =
Most recent distributions like Ubuntu 9.10 switch from HAL (being deprecated) to DevKit. Hence, the HAL configurations explained underneath, fail to work.  
+
Most recent distributions like Ubuntu 9.10 switch from HAL (being deprecated) to DevKit. Hence, the HAL configurations explained underneath, fail to work.
  
 
The easiest way to configure your touchpad and trackpoint with DevKit is by using the [http://live.gnome.org/GPointingDeviceSettings GPointingDeviceSettings] panel that fully supports the hardware. You can easily download the panel by installing {{cmd| gpointing-device-settings|}}. On Ubuntu open a terminal and execute the command {{cmduser| sudo apt-get install gpointing-device-settings}}
 
The easiest way to configure your touchpad and trackpoint with DevKit is by using the [http://live.gnome.org/GPointingDeviceSettings GPointingDeviceSettings] panel that fully supports the hardware. You can easily download the panel by installing {{cmd| gpointing-device-settings|}}. On Ubuntu open a terminal and execute the command {{cmduser| sudo apt-get install gpointing-device-settings}}
Line 42: Line 86:
  
 
=== Scrolling ===
 
=== Scrolling ===
By default the middle mouse button is that, a middle mouse button, which in Linux is used for the Paste operation.
 
  
But you can configure it to act in the same way as in Windows, such that you can use it for vertical scrolling (keep the button pressed and move the TrackPoint up and down to scroll).  
+
By default the middle mouse button is just that, a middle mouse button, which in Linux is used for the Paste operation.
 +
 
 +
You may configure it to act in the same way as in Windows, such that you can use it for vertical scrolling: keep the button pressed and move the TrackPoint up and down to scroll. (In GPointing Device Settings, this is known as "Use wheel emulation".)
 +
 
 +
'''Note:''' This setting is not compatible with using Alt + Middle Mouse Button to resize windows. If you want to resize windows with the trackpad, disable wheel emulation. On Ubuntu 11.10, this setting resides in <tt>/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf</tt> (see below), although some touchpads use <tt>/usr/share/X11/xorg.conf.d/50-synaptics.conf</tt>.
 +
 
 +
==== xorg.conf.d ====
 +
 
 +
Some distributions now support the new Xorg hotplug configuration method via xorg.conf.d directories (in Ubuntu 10.04 Lucid Lynx) instead of hal. In contrast to the udev method below, it should be around for some time, so it might be the best way to “statically” configure scrolling.
 +
 
 +
Create the file {{path|/usr/lib/X11/xorg.conf.d/20-thinkpad.conf}} as root with the following content:
 +
 
 +
<pre>
 +
Section "InputClass"
 +
Identifier "Trackpoint Wheel Emulation"
 +
MatchProduct "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device|Composite TouchPad / TrackPoint"
 +
MatchDevicePath "/dev/input/event*"
 +
Option "EmulateWheel" "true"
 +
Option "EmulateWheelButton" "2"
 +
Option "Emulate3Buttons" "false"
 +
Option "XAxisMapping" "6 7"
 +
Option "YAxisMapping" "4 5"
 +
EndSection
 +
</pre>
 +
 
 +
Save and restart Xorg (or it'll be enabled at next reboot).
 +
 
 +
{{NOTE|For Ubuntu 10.10 Maverick Meerkat, the correct path is {{path|/usr/share/X11/xorg.conf.d}}}}
 +
{{NOTE|For Arch Linux or Fedora or PCLinuxOS, the correct path is {{path|/etc/X11/xorg.conf.d}}}}
 +
 
 +
{{NOTE|If the above does not work for you, you may need to add a different MatchProduct string.  Use <pre>find /dev/input/event* -exec udevadm info --attribute-walk --name={} \; | grep -e product -e name | sort -u</pre> to get a list of possibilities.}}
 +
 
 +
{{NOTE|If the above directory doesn't exist by default in your distribution, it probably doesn't support this method. In this case, please refer to the udev or xinput method below.}}
  
 
==== udev ====
 
==== udev ====
  
Now that Xorg doesn't use the configuration from hal (in Debian unstable starting january 2010), the only way to “statically” configure scrolling in trackpoint is udev. (for other people, xinput method, below, works fine). This method will be gone (_again_) in not too long so it might be a better idea to use xinput way. YMMV.
+
Now that Xorg doesn't use the configuration from hal (in Debian unstable starting january 2010), the only way to “statically” configure scrolling in trackpoint is udev. (for other people, xinput method, works fine). This method will be gone (_again_) in not too long so it might be a better idea to use xinput way. YMMV.
  
 
Create the file {{path|/etc/udev/rules.d/99_trackpoint.rules}} as root with the following content:
 
Create the file {{path|/etc/udev/rules.d/99_trackpoint.rules}} as root with the following content:
Line 67: Line 142:
  
 
Save and restart udev then Xorg (or it'll be enabled at next reboot).
 
Save and restart udev then Xorg (or it'll be enabled at next reboot).
 +
 +
{{NOTE|The ID_PATH used in the example above is a typical value.  To determine the ID_PATH appropriate to the TrackPoint on a specific model see [[#Determining TrackPoint Path ID|Determining TrackPoint Path ID]]}}
  
 
==== Hal (soon to be deprecated) ====
 
==== Hal (soon to be deprecated) ====
Line 88: Line 165:
 
After this reboot, or restart the hal service and Xorg. You can validate the settings with {{cmd|lshal|}}.
 
After this reboot, or restart the hal service and Xorg. You can validate the settings with {{cmd|lshal|}}.
  
In some models (eg: X301) you may have to use "PS/2 Generic Mouse" instead of "TPPS/2 IBM TrackPoint". Have a look to your input devices typing <code>lshal|grep input.product</code>.
+
In some models (eg: X301 and X200 since Jan 10 2010 on debian sid) you may have to use "PS/2 Generic Mouse" instead of "TPPS/2 IBM TrackPoint". Have a look to your input devices typing <code>lshal|grep input.product</code>.
  
 +
Alternatively it is also possible to use the "old" Xorg configuration by adding the following lines to the {{path|/etc/X11/xorg.conf}}:
 +
 +
<pre>
 +
Section "ServerFlags"
 +
Option "AutoAddDevices" "false"
 +
EndSection
 +
</pre>
 +
 +
Using this entry HAL will not be used for the input devices.
  
 
====Reactivate Scrolling after suspend/resume====
 
====Reactivate Scrolling after suspend/resume====
Scrolling may be disabled after a resume from suspend.  
+
Scrolling may be disabled after a resume from suspend.
  
 
You can manually reactivate the trackpoint by reloading the {{path|psmouse}} module as root:
 
You can manually reactivate the trackpoint by reloading the {{path|psmouse}} module as root:
Line 109: Line 195:
  
 
<pre>
 
<pre>
SUBSYSTEM=="serio", DRIVERS=="psmouse", ATTR{press_to_select}="1", ATTR{sensitivity}="122"
+
SUBSYSTEM=="serio", DRIVERS=="psmouse", ATTRS{press_to_select}="1", ATTRS{sensitivity}="122"
 
</pre>
 
</pre>
  
 
Testing udev  with {{cmdroot|udevadm test /sys/devices/platform/i8042/serio1}} should apply the new changes.  All of the settings listed [[How to configure the TrackPoint#Sysfs_Options_Reference|below]] can be specified here as part of a comma separated list.
 
Testing udev  with {{cmdroot|udevadm test /sys/devices/platform/i8042/serio1}} should apply the new changes.  All of the settings listed [[How to configure the TrackPoint#Sysfs_Options_Reference|below]] can be specified here as part of a comma separated list.
 +
The customized values should be loaded automatically when booting. However, due to a [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=549379  kernel bug] (affecting Lucid Lynx), the attributes may not yet exist when the udev rule fires. As a work around, add a WAIT_FOR condition on the attribute. In order to make sure you are using the right constraints (SUBSYSTEM, DRIVERS, etc), you can run {{cmdroot|udevadm info --query all --attribute-walk --path /sys/devices/platform/i8042/serio1/serio2}}.
 +
 +
<pre>
 +
SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTRS{sensitivity}="122"
 +
</pre>
 +
 +
On my system (Lucid Lynx), the above line did not work. I changed it to:
 +
<pre>
 +
SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTR{sensitivity}="255"
 +
</pre>
 +
and tested with {{cmdroot|udevadm test /sys/devices/platform/i8042/serio1/serio2}}.
 +
 +
On trusty, the following works for me:
 +
<pre>
 +
KERNEL=="serio2", SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTR{sensitivity}="255"
 +
</pre>
 +
 +
On xenial (16.04) the following line works for me (WAIT_FOR is not supported anymore):
 +
<pre>
 +
KERNEL=="serio2", SUBSYSTEM=="serio", DRIVERS=="psmouse", ATTR{sensitivity}:="255", ATTR{speed}:="255"
 +
</pre>
 +
 +
To avoid the wait you can also listen for the Trackpoint input device to appear and then run a script to set the parameters
 +
 +
<pre>
 +
SUBSYSTEM=="input", ATTR{name}=="*TrackPoint*", RUN+="/etc/conf.d/trackpoint"
 +
</pre>
  
 +
An example {{path|/etc/conf.d/trackpoint}} would be
 +
 +
<pre>#! /bin/bash
 +
 +
## Trackpoint settings
 +
 +
# When run from a udev rule, DEVPATH should be set
 +
if [ ! -z $DEVPATH ] ; then
 +
    TPDEV=/sys/$( echo "$DEVPATH" | sed 's/\/input\/input[0-9]*//' )
 +
else
 +
# Otherwise just look in /sys/
 +
    TPDEV=$(find /sys/devices/platform/i8042 -name name | xargs grep -Fl TrackPoint | sed 's/\/input\/input[0-9]*\/name$//')
 +
fi
 +
 +
# http://www.thinkwiki.org/wiki/How_to_configure_the_TrackPoint
 +
# http://wwwcssrv.almaden.ibm.com/trackpoint/files/ykt3eext.pdf
 +
#------------------------------------------------------------
 +
if [ -d "$TPDEV" ]; then
 +
    echo "Configuring Trackpoint"
 +
    echo -n 255    > $TPDEV/sensitivity    # Integer  128  Sensitivity
 +
    echo -n 110    > $TPDEV/speed          # Integer  97  Cursor speed
 +
    echo -n 4      > $TPDEV/inertia        # Integer  6  Negative intertia
 +
else
 +
    echo "Couldn't find trackpoint device $TPDEV"
 +
fi
 +
</pre>
  
 
=Configuration using sysfs=
 
=Configuration using sysfs=
Line 161: Line 300:
 
:{{cmdroot|echo -n 120 > /sys/devices/platform/i8042/serio1/serio2/speed}}
 
:{{cmdroot|echo -n 120 > /sys/devices/platform/i8042/serio1/serio2/speed}}
 
:{{cmdroot|echo -n 250 > /sys/devices/platform/i8042/serio1/serio2/sensitivity}}
 
:{{cmdroot|echo -n 250 > /sys/devices/platform/i8042/serio1/serio2/sensitivity}}
 +
 +
Alternatively, on my ThinkPad T420s, the correct commands are:
 +
 +
:{{cmdroot|echo -n 120 > /sys/devices/platform/i8042/serio1/speed}}
 +
:{{cmdroot|echo -n 250 > /sys/devices/platform/i8042/serio1/sensitivity}}
  
 
Feel free to experiment with your settings until you find a combination that is comfortable.
 
Feel free to experiment with your settings until you find a combination that is comfortable.
Line 186: Line 330:
 
         Option    "YAxisMapping" "4 5" #Map trackpoint Y axis to Y axis of emulated wheel
 
         Option    "YAxisMapping" "4 5" #Map trackpoint Y axis to Y axis of emulated wheel
 
     EndSection
 
     EndSection
 +
 +
{{NOTE|The device path used in the example above is a typical value.  To determine the device path appropriate to the TrackPoint on a specific model see [[#Determining TrackPoint Path ID|Determining TrackPoint Path ID]]}}
  
 
==Using the "mouse" driver (deprecated, only for old Xorg versions)==
 
==Using the "mouse" driver (deprecated, only for old Xorg versions)==
Line 239: Line 385:
 
to the synaptics device section. This will make the synaptics driver ignore the Trackpoint, so it will be handled by the mouse driver. This allowed me to disable the touchpad while making the TrackPoint work like it should.
 
to the synaptics device section. This will make the synaptics driver ignore the Trackpoint, so it will be handled by the mouse driver. This allowed me to disable the touchpad while making the TrackPoint work like it should.
  
{{NOTE| With the above mouse section in my xorg.conf all this works like a charm:  
+
{{NOTE| With the above mouse section in my xorg.conf all this works like a charm:
 
*I can press the wheel on my external USB mouse and move the mouse up and down for scrolling
 
*I can press the wheel on my external USB mouse and move the mouse up and down for scrolling
 
*or I can just use the wheel on the external mouse for scrolling
 
*or I can just use the wheel on the external mouse for scrolling
Line 245: Line 391:
 
*Even horizontal scrolling works automagically in Konqueror, for Firefox/Opera see below.
 
*Even horizontal scrolling works automagically in Konqueror, for Firefox/Opera see below.
  
Simultaneously I can use  
+
Simultaneously I can use
*a press on the external mouse's wheel  
+
*a press on the external mouse's wheel
 
*or the MMB of the trackpoint
 
*or the MMB of the trackpoint
  
Line 255: Line 401:
 
=Application specific tweaks=
 
=Application specific tweaks=
 
===Configure Opera for using trackpoint horizontal scrolling===
 
===Configure Opera for using trackpoint horizontal scrolling===
To fix horizontal scrolling in Opera, you need to edit the configfile <tt>standard_mouse.ini</tt> in e.g. /usr/share/opera/ini/ (Debian) or /opt/opera/share/opera/ini/ (Gentoo) and comment out the following lines
+
To fix horizontal scrolling in Opera, you need to edit the configfile <tt>standard_mouse.ini</tt> in e.g. /usr/share/opera/ui/ (Debian) or /opt/opera/share/opera/ini/ (Gentoo) and comment out the following lines
 
<pre>
 
<pre>
 
Button6                                                        = Back
 
Button6                                                        = Back
Line 280: Line 426:
 
=Sysfs Options Reference=
 
=Sysfs Options Reference=
 
{{NOTE|These options are current as of kernel version 2.6.29, 3 May 2009}}
 
{{NOTE|These options are current as of kernel version 2.6.29, 3 May 2009}}
{|  
+
{|
 
|-
 
|-
 
! Name
 
! Name
Line 345: Line 491:
 
| Boolean
 
| Boolean
 
| 0
 
| 0
| Supress movement after drag release  
+
| Supress movement after drag release
 
|-
 
|-
 
| ext_dev
 
| ext_dev
Line 353: Line 499:
 
|}
 
|}
 
Table info taken from [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/input/mouse/trackpoint.h;hb=HEAD here].  The given link will always point to the current version of the driver.  If the notes seem sparse, that's because the code is sparse.  On the other hand, the [http://wwwcssrv.almaden.ibm.com/trackpoint/files/ykt3eext.pdf Trackpoint Engineering Specification Version 4.0] <!--if this link breaks, I recommend a quick Google search for "trackpoint version 4 engineering specifications" --> contains more documentation information than anyone ever desired.
 
Table info taken from [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/input/mouse/trackpoint.h;hb=HEAD here].  The given link will always point to the current version of the driver.  If the notes seem sparse, that's because the code is sparse.  On the other hand, the [http://wwwcssrv.almaden.ibm.com/trackpoint/files/ykt3eext.pdf Trackpoint Engineering Specification Version 4.0] <!--if this link breaks, I recommend a quick Google search for "trackpoint version 4 engineering specifications" --> contains more documentation information than anyone ever desired.
 +
 +
=Determining TrackPoint Path ID=
 +
Both the [[#udev|udev]] and [[#Configuration using the X server (xorg.conf)|xorg.conf]] configuration methods require knowledge of the Path ID of the TrackPoint.  In the [[#udev|udev]] configuration method, the Path ID is used to match the ID_PATH environmental variable, in the [[#Configuration using the X server (xorg.conf)|xorg.conf]] configuration method it is the prefix for the device file name inside the {{path|/dev/input/by-id}} directory.  The path ID can vary between ThinkPad models, distributions (with varying kernel patches), and between kernel versions.  One way to find the path ID for the TrackPoint is to use udev's path_id utility on the sysfs device path for the TrackPoint.  This device path can be found using the {{path|name}} file which describes the TrackPoint.  The process can be automated using the following shell command:
 +
/lib/udev/path_id $(find /sys/devices/platform/i8042 -name name | xargs grep -Fl TrackPoint | sed 's/\/sys\(.*\)\/name/\1/')

Latest revision as of 02:59, 11 May 2017

Below are several ways of configuring the kernel psmouse driver for controlling extended TrackPoint features.

On a Modern distribution (like Fedora, Ubuntu or OpenSUSE) you will want to use xinput or one of the graphical front ends. For distributions that are lagging a bit (e.g. Debian Lenny and PCLOS '09) you may still want to use the old xorg config method.

Configuration using xinput

If you want to modify changes on the fly, you can do so with xinput (part of the optional xorg-x11-apps rpm on Fedora). Note that these changes are not saved when the xserver is restarted. However, you can add the lines e.g. in your .xsessionrc (depends on your distribution) so they are executed every time X starts.

To query the available options

xinput list-props "TPPS/2 IBM TrackPoint"

More information can be found in the man-pages for evdev

man evdev

To enable vertical scrolling

xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 1
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 2
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Timeout" 200

To enable horizontal scrolling in addition to vertical scrolling

xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Axes" 6 7 4 5

To enable middle button emulation (using left- and right-click simultaneously)

xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Middle Button Emulation" 1
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Middle Button Timeout" 50

old method using xinput set-int-prop

Previous approaches needed to find the device's numeric id instead of simply using the name, and used "set-int-prop" instead of "set-prop", which required specifying the format (8-bit, 16-bit etc.).

Example: openSUSE 11.2 and ThinkPad USB Keyboard with TrackPoint

xinput list

will show two "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint." with two different ids. Use the id with Axis 0 and Axis 1 items.

Suppose the id was 12. The following will enable the trackpoint scrolling:

xinput set-int-prop 12 "Evdev Wheel Emulation" 8 1
xinput set-int-prop 12 "Evdev Wheel Emulation Button" 8 2
xinput set-int-prop 12 "Evdev Wheel Emulation Timeout" 16 200

To do this in a script without knowing the numeric id in advance, the following will run through input devices and set properties on all those that support Evdev Wheel Emulation, assumed to be the Trackpoint(s).

#!/bin/sh
xinput list | sed -ne 's/^[^ ][^V].*id=\([0-9]*\).*/\1/p' | while read id
do
        case `xinput list-props $id` in
        *"Middle Button Emulation"*)
                xinput set-int-prop $id "Evdev Wheel Emulation" 8 1
                # etc.
                ;;
        esac
done

and save it with any name such as trackPointScrolling.sh, and make it executable:

chmod +x trackPointScrolling.sh

It can then be run via $ ./trackPointScrolling.sh or in a startup script.

Graphical Frontends

If you are using GNOME, you might want to use GPointing Device Settings or configure-trackpoint as a graphical frontends.

GPointing Device Settings

It is available for Fedora 12, Ubuntu 9.10 and Debian Squeeze in the standard package repositories

NOTE!
Unfortunately it seems no longer maintained, and does not work properly with GNOME3 [bug]

Screenshot-GPointing Device Settings-TrackPoint.png

configure-trackpoint

To install it in Ubuntu run ...

sudo apt-get install sysfsutils

...and then download and install the deb here. Note that saved settings are not restored after reboot in Lucid Lynx. See methods below to make settings permanent.

Configuration using DevKit

Most recent distributions like Ubuntu 9.10 switch from HAL (being deprecated) to DevKit. Hence, the HAL configurations explained underneath, fail to work.

The easiest way to configure your touchpad and trackpoint with DevKit is by using the GPointingDeviceSettings panel that fully supports the hardware. You can easily download the panel by installing gpointing-device-settings. On Ubuntu open a terminal and execute the command $ sudo apt-get install gpointing-device-settings

Launch the UI through the $ gpointing-device-settings command, but you can also add a menu entry to your System / Preferences menu for easier access to the UI panel.

Configuration using udev and HAL

Modern distributions like Ubuntu 8.10 and Fedora 10 use udev and HAL to configure the input devices. You should no longer make changes to xorg.conf as by default Xorg (through the evdev driver) will let the kernel now handle input devices.

But before you get started on this you should make sure you have all the updates applied from your distro vendor as both Ubuntu 8.10 and Fedora 10 require some additional fixes that you will need.

Scrolling

By default the middle mouse button is just that, a middle mouse button, which in Linux is used for the Paste operation.

You may configure it to act in the same way as in Windows, such that you can use it for vertical scrolling: keep the button pressed and move the TrackPoint up and down to scroll. (In GPointing Device Settings, this is known as "Use wheel emulation".)

Note: This setting is not compatible with using Alt + Middle Mouse Button to resize windows. If you want to resize windows with the trackpad, disable wheel emulation. On Ubuntu 11.10, this setting resides in /usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf (see below), although some touchpads use /usr/share/X11/xorg.conf.d/50-synaptics.conf.

xorg.conf.d

Some distributions now support the new Xorg hotplug configuration method via xorg.conf.d directories (in Ubuntu 10.04 Lucid Lynx) instead of hal. In contrast to the udev method below, it should be around for some time, so it might be the best way to “statically” configure scrolling.

Create the file /usr/lib/X11/xorg.conf.d/20-thinkpad.conf as root with the following content:

Section "InputClass"
	Identifier	"Trackpoint Wheel Emulation"
	MatchProduct	"TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device|Composite TouchPad / TrackPoint"
	MatchDevicePath	"/dev/input/event*"
	Option		"EmulateWheel"		"true"
	Option		"EmulateWheelButton"	"2"
	Option		"Emulate3Buttons"	"false"
	Option		"XAxisMapping"		"6 7"
	Option		"YAxisMapping"		"4 5"
EndSection

Save and restart Xorg (or it'll be enabled at next reboot).

NOTE!
For Ubuntu 10.10 Maverick Meerkat, the correct path is /usr/share/X11/xorg.conf.d
NOTE!
For Arch Linux or Fedora or PCLinuxOS, the correct path is /etc/X11/xorg.conf.d
NOTE!
If the above does not work for you, you may need to add a different MatchProduct string. Use
find /dev/input/event* -exec udevadm info --attribute-walk --name={} \; | grep -e product -e name | sort -u
to get a list of possibilities.
NOTE!
If the above directory doesn't exist by default in your distribution, it probably doesn't support this method. In this case, please refer to the udev or xinput method below.

udev

Now that Xorg doesn't use the configuration from hal (in Debian unstable starting january 2010), the only way to “statically” configure scrolling in trackpoint is udev. (for other people, xinput method, works fine). This method will be gone (_again_) in not too long so it might be a better idea to use xinput way. YMMV.

Create the file /etc/udev/rules.d/99_trackpoint.rules as root with the following content:

ACTION!="add|change", GOTO="xorg_trackpoint_end"
KERNEL!="event*", GOTO="xorg_trackpoint_end"

ENV{ID_PATH}!="platform-i8042-serio-1", GOTO="xorg_trackpoint_end"

ENV{x11_options.EmulateWheel}="1"
ENV{x11_options.EmulateWheelButton}="2"
ENV{x11_options.XAxisMapping}="6 7"
ENV{x11_options.Emulate3Buttons}="0"

LABEL="xorg_trackpoint_end"

Save and restart udev then Xorg (or it'll be enabled at next reboot).

NOTE!
The ID_PATH used in the example above is a typical value. To determine the ID_PATH appropriate to the TrackPoint on a specific model see Determining TrackPoint Path ID

Hal (soon to be deprecated)

To accomplish this create the file /etc/hal/fdi/policy/mouse-wheel.fdi as root with the following content:

<match key="info.product" string="TPPS/2 IBM TrackPoint">
 <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
 <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
 <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
 <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
 <merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>
</match>

If you also want to have horizontal scrolling, simply add the following XAxisMapping option to the above

 <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>

After this reboot, or restart the hal service and Xorg. You can validate the settings with lshal.

In some models (eg: X301 and X200 since Jan 10 2010 on debian sid) you may have to use "PS/2 Generic Mouse" instead of "TPPS/2 IBM TrackPoint". Have a look to your input devices typing lshal|grep input.product.

Alternatively it is also possible to use the "old" Xorg configuration by adding the following lines to the /etc/X11/xorg.conf:

Section "ServerFlags"
	Option 	"AutoAddDevices" "false"
EndSection

Using this entry HAL will not be used for the input devices.

Reactivate Scrolling after suspend/resume

Scrolling may be disabled after a resume from suspend.

You can manually reactivate the trackpoint by reloading the psmouse module as root:

# rmmod psmouse && modprobe psmouse

You can automatically force the pm-utils to reload this module. Create a file /etc/pm/config.d/01reload_mouse as root with the following content:

# reload psmouse to reactivate trackpoint scrolling
SUSPEND_MODULES="${SUSPEND_MODULES:+$SUSPEND_MODULES }psmouse"

Configuring other options (e.g. Press to select, Sensitivity and Speed)

Create a file /etc/udev/rules.d/10-trackpoint.rules and add a line to suit your needs

SUBSYSTEM=="serio", DRIVERS=="psmouse", ATTRS{press_to_select}="1", ATTRS{sensitivity}="122"

Testing udev with # udevadm test /sys/devices/platform/i8042/serio1 should apply the new changes. All of the settings listed below can be specified here as part of a comma separated list. The customized values should be loaded automatically when booting. However, due to a kernel bug (affecting Lucid Lynx), the attributes may not yet exist when the udev rule fires. As a work around, add a WAIT_FOR condition on the attribute. In order to make sure you are using the right constraints (SUBSYSTEM, DRIVERS, etc), you can run # udevadm info --query all --attribute-walk --path /sys/devices/platform/i8042/serio1/serio2.

SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTRS{sensitivity}="122"

On my system (Lucid Lynx), the above line did not work. I changed it to:

SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTR{sensitivity}="255"

and tested with # udevadm test /sys/devices/platform/i8042/serio1/serio2.

On trusty, the following works for me:

KERNEL=="serio2", SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTR{sensitivity}="255"

On xenial (16.04) the following line works for me (WAIT_FOR is not supported anymore):

KERNEL=="serio2", SUBSYSTEM=="serio", DRIVERS=="psmouse", ATTR{sensitivity}:="255", ATTR{speed}:="255"

To avoid the wait you can also listen for the Trackpoint input device to appear and then run a script to set the parameters

SUBSYSTEM=="input", ATTR{name}=="*TrackPoint*", RUN+="/etc/conf.d/trackpoint"

An example /etc/conf.d/trackpoint would be

#! /bin/bash

## Trackpoint settings

# When run from a udev rule, DEVPATH should be set
if [ ! -z $DEVPATH ] ; then
    TPDEV=/sys/$( echo "$DEVPATH" | sed 's/\/input\/input[0-9]*//' )
else
# Otherwise just look in /sys/
    TPDEV=$(find /sys/devices/platform/i8042 -name name | xargs grep -Fl TrackPoint | sed 's/\/input\/input[0-9]*\/name$//')
fi

# http://www.thinkwiki.org/wiki/How_to_configure_the_TrackPoint
# http://wwwcssrv.almaden.ibm.com/trackpoint/files/ykt3eext.pdf
#------------------------------------------------------------
if [ -d "$TPDEV" ]; then
    echo "Configuring Trackpoint"
    echo -n 255     > $TPDEV/sensitivity     # Integer  128   Sensitivity
    echo -n 110     > $TPDEV/speed           # Integer  97   Cursor speed
    echo -n 4       > $TPDEV/inertia         # Integer  6   Negative intertia
else
    echo "Couldn't find trackpoint device $TPDEV"
fi

Configuration using sysfs

Another way to modify changes on the fly, is echoing values directly into special files in sysfs.

NOTE!

The examples shown below are valid for ThinkPads with both TrackPoint and Touchpad, in which case the sysfs path is /sys/devices/platform/i8042/serio1/serio2.

If however you have a ThinkPad without Touchpad, or with the Touchpad disabled in the BIOS, the sysfs path needs to be changed to /sys/devices/platform/i8042/serio1 instead (notice the missing serio2 at the end).

If you want to set the sysfs parameters at boot, you can use the sysfsutils and put the preferred value in /etc/sysfs.conf.

Press to Select

Press to Select allows you to tap the control stick which will simulate a left click. You can enable this feature by typing the following in to a terminal (you may need to be root):

# echo -n 1 > /sys/devices/platform/i8042/serio1/serio2/press_to_select

Press to Select should now be enabled. You can disable it in a similar manner:

# echo -n 0 > /sys/devices/platform/i8042/serio1/serio2/press_to_select

You can use this script to automate the operation

       #!/bin/bash
       if [ "$1" = "1" ]; then
               echo "Turning on tap on TrackPoint"
               echo -n 1 > /sys/devices/platform/i8042/serio1/serio2/press_to_select
               exit 0
       fi
       if [ "$1" = "0" ]; then
               echo "Turning off tap on TrackPoint"
               echo -n 0 > /sys/devices/platform/i8042/serio1/serio2/press_to_select
               exit 0
       fi
       echo -n "Tap status: "
       cat /sys/devices/platform/i8042/serio1/serio2/press_to_select

In Ubuntu 8.10 to make Press to Select a permanent change:

echo -n 1 | tee /sys/devices/platform/i8042/serio1/serio2/press_to_select

As root, append the above command above "exit 0" in /etc/gdm/Init/Default

Sensitivity & Speed

Adjusting the speed and sensitivity of the TrackPoint requires echoing a value between 0 and 255 into the appropriate file. For example, for a speed of 120 and a sensitivity of 250, type the following into a terminal:

# echo -n 120 > /sys/devices/platform/i8042/serio1/serio2/speed
# echo -n 250 > /sys/devices/platform/i8042/serio1/serio2/sensitivity

Alternatively, on my ThinkPad T420s, the correct commands are:

# echo -n 120 > /sys/devices/platform/i8042/serio1/speed
# echo -n 250 > /sys/devices/platform/i8042/serio1/sensitivity

Feel free to experiment with your settings until you find a combination that is comfortable.

When you satisfy your setting, add the two lines into /etc/rc.d/rc.local in order to avoid restoring the default setting every time the system reboots. In Ubuntu 9.10, add the lines to /etc/rc.local to avoid this.

Vertical Scrolling

No sysfs entry exists for vertical scrolling in kernels after 2.6.11.

The feature was removed as it was not a hardware feature, but rather emulating a scroll action in software and as such did not belong in the kernel. Instead the scroll feature of the Xserver should be used, which can be activated with HAL or xinput as described above.

Configuration using the X server (xorg.conf)

Using the "evdev" driver (preferred, especially for recent Xorg versions)

Extract from /etc/X11/xorg.conf on an X31:

   Section "InputDevice"
       Identifier "TPPS/2 IBM TrackPoint"
       Driver     "evdev"
       Option     "Device" "/dev/input/by-path/platform-i8042-serio-1-event-mouse"
       Option     "GrabDevice" "False"
       Option     "EmulateWheel" "true" #Enable wheel emulation for the Trackpoint
       Option     "EmulateWheelButton" "2" #Use the middle button for the emulation
       Option     "XAxisMapping" "6 7" #Map trackpoint X axis to X axis of emulated wheel
       Option     "YAxisMapping" "4 5" #Map trackpoint Y axis to Y axis of emulated wheel
   EndSection
NOTE!
The device path used in the example above is a typical value. To determine the device path appropriate to the TrackPoint on a specific model see Determining TrackPoint Path ID

Using the "mouse" driver (deprecated, only for old Xorg versions)

NOTE!
This only applies to old distributions with Xorg versions that did not yet use evdev. For modern distributions use one of the other methods

The scroll setting has been removed from the trackpoint driver in kernel versions 2.6.11 and above. Scroll emulation should now be handled in the X server.

A nice side effect of that is, that middle button scrolling applies to any mouse and not just the TrackPoint interface, which can be a quite handy feature for desktop computers or people who prefer to use an external mouse, especially when scrolling through long lists or needing to use horizontal scrolling with a mouse which has only a vertical scroll wheel.

The necessary functionality, known as "EmulateWheelTimeout" allowing to use button 2 for a middle click, wasn't implemented in Xorg prior to 6.9/7.0. However, there was a patch included in most distributions packages of Xorg, which was announced here. You can find an updated version of the package in the experimental branch of Debian or try to build the mouse driver yourself with the information in the announcement. This has successfully been tried with FC3's 6.8.2 packages.

Once this functionality is in the X.org, add these lines to your TrackPoint configuration section in /etc/X11/xorg.conf:

       Option          "EmulateWheel"          "on"
       Option          "EmulateWheelButton"    "2"

It may also be necessary to add these lines:

       Option "YAxisMapping" "4 5"
       Option "XAxisMapping" "6 7"

which specify which buttons are mapped to motion in the vertical (Y) and horizontal (X) directions, respectively, in wheel emulation mode (see http://www.xfree86.org/current/mouse.4.html).

Hint:
Use the program "xev" to see, what mouse button identifiers are sent by your mouse/touchpad/trackpoint.
You might want to try: "xev | grep button"
Hint:
If it does not work see if evdev is installed and remove it. On gentoo do the following:

eix xf86-input-evdev
emerge -C xf86-input-evdev
and then remove the evdev flag in make.conf INPUT_DEVICES

So, a complete mouse section, that implements this nicely and works very well on my R51, even with a simultaneously connected USB mouse, looks like that (tried out today, 20th of September, 2006 on Dapper):

 Section "InputDevice"
       Identifier  "Configured Mouse"
       Driver      "mouse"
       Option      "CorePointer"
       Option      "Device"              "/dev/input/mice"
       Option      "Protocol"            "ExplorerPS/2"
       Option      "Emulate3Buttons"     "on"
       Option      "Emulate3TimeOut"     "50"
       Option      "EmulateWheel"        "on"
       Option      "EmulateWheelTimeOut" "200"
       Option      "EmulateWheelButton"  "2"
       Option      "YAxisMapping"        "4 5"
       Option      "XAxisMapping"        "6 7"
       Option      "ZAxisMapping"        "4 5"
 EndSection

The mappings for Y and Z are the same, since the "Z-Axis" refers to actual hardware scrolling wheels which usually scroll the screen along the Y-Axis. If there is no hardware scrolling wheel present, horizontal and vertical scrolling using the TrackPoint work fine without the Z-Axis line.

Now restart X and hold down button 2 and move the mouse to scroll, or just press and release button 2 for a middle click.

To make this work with the synaptics driver for the touchpad, you can add

       Option      "GuestMouseOff" "1"

to the synaptics device section. This will make the synaptics driver ignore the Trackpoint, so it will be handled by the mouse driver. This allowed me to disable the touchpad while making the TrackPoint work like it should.

NOTE!
With the above mouse section in my xorg.conf all this works like a charm:
  • I can press the wheel on my external USB mouse and move the mouse up and down for scrolling
  • or I can just use the wheel on the external mouse for scrolling
  • or pressing the MMB button of the trackpoint and use the trackpoint for scrolling.
  • Even horizontal scrolling works automagically in Konqueror, for Firefox/Opera see below.

Simultaneously I can use

  • a press on the external mouse's wheel
  • or the MMB of the trackpoint
for pasting the buffer. Lovely! :)
Hint:
If you don't use the middle-mouse-button for pasting and sometimes pasting things by mistake while scrolling (witch is really odd) simply set the "EmulateWheelTimeOut" to "1" as a (bloody) workaround. Middle click will only possible with pressing left and right button simultaneously!

Application specific tweaks

Configure Opera for using trackpoint horizontal scrolling

To fix horizontal scrolling in Opera, you need to edit the configfile standard_mouse.ini in e.g. /usr/share/opera/ui/ (Debian) or /opt/opera/share/opera/ini/ (Gentoo) and comment out the following lines

Button6                                                        = Back
Button7                                                        = Forward

so they look like that

;Button6                                                        = Back
;Button7                                                        = Forward

Remember, Button6 and Button7 do not so coincidental correspond with our X configuration we know from above:

Option "YAxisMapping" "6 7"

After this change you will be able to scroll vertically and horizontally with your middle button.

Firefox 3 tweaks

These settings make Firefox on Linux behave more like the Windows version. They were tested on an out of the box Fedora 10 system on a Thinkpad T61. Go into about:config, and set the following:

middlemouse.paste = false
middlemouse.contentLoadURL = false
general.autoScroll = true

Sysfs Options Reference

NOTE!
These options are current as of kernel version 2.6.29, 3 May 2009
Name Type Default Notes
sensitivity Integer 128 Sensitivity
speed Integer 97 Cursor speed
inertia Integer 6 Described as "negative inertia." It acts more like friction. High values cause the cursor to snap backward when the Trackpoint is released
reach Integer 10 Backup for Z-axis press
draghys Integer 255 Drag hysteresis (how hard it is to drag with Z-axis pressed)
mindrag Integer 20 Minimum amount of force needed to trigger dragging
thresh Integer 8 Minimum value for a Z-axis press
upthresh Integer 255 Used to generate a 'click' on Z-axis
ztime Integer 38 How sharp of a press
jenks Integer 135 Minimum curvature for double click
press_to_select Boolean 0 Press to select
skipback Boolean 0 Supress movement after drag release
ext_dev Boolean 0 Disable external device

Table info taken from here. The given link will always point to the current version of the driver. If the notes seem sparse, that's because the code is sparse. On the other hand, the Trackpoint Engineering Specification Version 4.0 contains more documentation information than anyone ever desired.

Determining TrackPoint Path ID

Both the udev and xorg.conf configuration methods require knowledge of the Path ID of the TrackPoint. In the udev configuration method, the Path ID is used to match the ID_PATH environmental variable, in the xorg.conf configuration method it is the prefix for the device file name inside the /dev/input/by-id directory. The path ID can vary between ThinkPad models, distributions (with varying kernel patches), and between kernel versions. One way to find the path ID for the TrackPoint is to use udev's path_id utility on the sysfs device path for the TrackPoint. This device path can be found using the name file which describes the TrackPoint. The process can be automated using the following shell command:

/lib/udev/path_id $(find /sys/devices/platform/i8042 -name name | xargs grep -Fl TrackPoint | sed 's/\/sys\(.*\)\/name/\1/')