Difference between revisions of "Serial Ultrabay Slim HDD Adapter IV"

From ThinkWiki
Jump to: navigation, search
(←Created page with '__NOTOC__ {| width="100%" |style="vertical-align:top" | |style="vertical-align:top" | <div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em...')
(No difference)

Revision as of 13:16, 16 March 2020

Serial Ultrabay Slim HDD Adapter IV

This is a HDD adapter that slides into a Serial Ultrabay Slim.

Features

  • One SATA slot for a 2.5-inch, 7 or 9.5-millimeter HDD/SSD/SSHD
  • Weight: 88 grams or 0.19 pounds
FOOTNOTES [Δ]
  1. This FRU does not contain the required MicroSATA-to-SATA adapter, in fact, it's just a cover which only holds the drive. To actually use this 'adapter', you need to get two M2.5 (length unknown) screws and a board identified as the 'BP700 NS-A447'. The BP700 NS-A447 board contains the said adapter to connect the 2.5-inch drive to the MicroSATA connector.
  2. This FRU requires a 2.5-inch drive bracket to secure the drive, which can be found in the ThinkPad Mobile Workstation Storage Kit (FRU: 4XB0L63274).

Part numbers

Branded with No Name

Branded as the ThinkPad Mobile Workstation 5.25” Hard Drive Adapter for ODD Bay

  • 4XH0L67917, 01AV3332

Linux support

If connected at boot time, the drive is normally /dev/sdb.

Models supporting this accessory

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Serial_Ultrabay_Slim_HDD_Adapter_IV&oldid=59829"