Difference between revisions of "Install Ubuntu Intrepid Ibex on a T61p"
(→Fix for choppy Compiz animations: Added back compiz settings and updated for version 177.) |
m (→Brightness control on battery power: Corrected typos.) |
||
Line 102: | Line 102: | ||
= Information, not Ubuntu issues = | = Information, not Ubuntu issues = | ||
== Brightness control on battery power == | == Brightness control on battery power == | ||
− | By default, when unplugging the AC power while the system is running, the brightness of the display goes down even when you have set not to in the Power Management settings and you are not able to reach a brightness level as high as possible when connected to AC power. This is not a software setting or GNOME bug, but a BIOS setting. In the BIOS you can find a brightness setting in the Power section. Set it to high for normal, | + | By default, when unplugging the AC power while the system is running, the brightness of the display goes down even when you have set not to in the Power Management settings and you are not able to reach a brightness level as high as possible when connected to AC power. This is not a software setting or GNOME bug, but a BIOS setting. In the BIOS you can find a brightness setting in the Power section. Set it to high for normal, expected behavior. You can let the GNOME Power Manager still lower the brightness, but you will be able to increase it when needed. |
[[Category:T61p]] | [[Category:T61p]] | ||
[[Category:Ubuntu]] | [[Category:Ubuntu]] | ||
[[Category:Ubuntu 8.10]] | [[Category:Ubuntu 8.10]] |
Revision as of 16:32, 25 October 2008
Contents
What works and what doesn't?
Working out-of-the-box
- Wireless (Intel 3945ABG or 4965AGN)
- Only tested G mode
- Wired LAN
- Video (VESA)
- Hardware Drivers panel offers to install nVIDIA proprietary drivers on first boot.
- Touchpoint and Trackpad
- Including scroll at the right side of the pad by default.
- Optical drive
- Optiarc AD-7910A works fine with Brasero disc burning
- Tested: CD-R, DVD+R
- Optiarc AD-7910A works fine with Brasero disc burning
- Sound card
- SD/MMC Memory card reader (Ricoh)
- Only tested SD (non-HC) cards. Didn't take locked (read-only) cards.
- Control buttons/Hotkeys
- Volume control buttons
- Screen brightness control
- Thinklight control
- WLAN/BT/OFF toggle
- Media player control
- Some ACPI features
- Battery status, power graphs and history
- Lid states and events
- Only tested with a single 6-cell battery
- ACPI features
- Suspend to RAM
- Suspend to Disk (Hibernate) FINALLY!! Be patient, though.
- STR and STD work even with full disk encryption (DM-crypt + LVM)!
(Small) Tweaks needed for...
- Microphone/Sound In
- Might need to be turned on in the mixer
- HDAPS
- Not yet in this howto
- Choppy Compiz animations
- NVidia's PowerMizer feature will slow down the GPU when "inactive" even on AC power.
Small issues with...
- The radio killswitch.
- Bluetooth and WLAN are turned off properly when using the killswitch at the front, but WLAN (3945) doensn't come up when enabling or will only show Channel 1 APs. Reloading the iwl3945 module will sometimes solve the issue.
- The soft-killswitch (Fn+F5) will only toggle Bluetooth instead of the four modes as in Hardy (BT+WLAN, BT, WLAN, ALL OFF).
Not working
- Logging out or restarting X
- With 177 version of the NVidia binary (restricted) graphics driver on a Quadro FX 570M.
Mendatory
Display/Video
This part is taken from Hardy installation instructions.
To enable 3D acceleration, the proprietary NVidia driver must be installed. The first time you boot into Ubuntu, you should get an alert asking if you want to install the binary driver. If not, it can be installed from the Hardware Drivers panel at System --> Administration --> Hardware Drivers. You will have a choiche between the 173 and 177 version of the driver. I would strongly recommend the latter one, because it will provide Suspend to disk functionality in favour of the 173 version.
This should also install the "NVidia X Server Settings" program in System --> Administration.
At the time of writing I am not able to restart X or log out from my GNOME session. X will fail to start and will eventually fall back to failsafe config (VESA drivers). This happens on my Quadro FX 570M and I'm not sure it is an issue of the new NVidia driver or the new X.org version in Intrepid.
Optional
Fix for choppy Compiz animations
The NVidia driver does not report the correct refresh rate of the display to Compiz, resulting in choppy animations and effects. To fix this, install the compizconfig-settings-manager package, then go to System --> Preferences --> Advanced Desktop Effects Settings. Click on General Options, go to the Display Settings tab, uncheck the Detect Refresh rate box and drag the Refresh Rate slider to 60. Also, check the Sync To VBlank box. This will improve the smoothness of the window animations significantly if you're sensitive to the choppy animations.
Compiz animations can also be choppy due to NVidia's PowerMizer feature, which slows down the GPU to conserve power when it is not in use. This works well for 3D games which constantly use 3D acceleration, but poorly for Compiz which uses the GPU in small bursts. It seems that the interval of the PowerMizer is way too long and is not speeding up when using in bursts. Fortunately, the situation seems to have improved in version 177 of the NVidia driver. To workaround this problem, I made a couple of shell scripts which keep the GPU at its highest speed while running on AC power. The first one is named "powermizer-loop" and does most of the work:
#!/bin/sh while true; do powerstate=`cat /proc/acpi/ac_adapter/AC/state | awk '{print $2}'` if [ $powerstate = "on-line" ]; then nvidia-settings -q all > /dev/null fi sleep 25; done
The second is named "powermizer-off" and starts up powermizer-loop when I log in, ensuring that only one copy runs at a time:
#!/bin/sh killall powermizer-loop ~/powermizer-loop &
I put both of these scripts in my home directory and made them executable by doing:
chmod a+x powermizer-loop powermizer-off
Then to make powermizer-off run on login, I opened System --> Preferences --> Sessions, clicked on Add, and entered the command to run the script, i.e. "/home/<user>/powermizer-off".
Of course, performance still suffers when running on battery, but hopefully NVidia will fix this problem in a future version of their driver.
Problems
Not able to restart X
This is quite an issue when you want to switch user or log out. I'm not able to trace down the problem, because the Xorg.0.log file doens't give any errors or hints. Surprisingly both Suspend to RAM and Suspend to Disk are not failing.--Gertvdijk 18:34, 23 October 2008 (CEST)
Radio Killswitch
TODO
|
Trace down this problem or look for bug report.
|
Information, not Ubuntu issues
Brightness control on battery power
By default, when unplugging the AC power while the system is running, the brightness of the display goes down even when you have set not to in the Power Management settings and you are not able to reach a brightness level as high as possible when connected to AC power. This is not a software setting or GNOME bug, but a BIOS setting. In the BIOS you can find a brightness setting in the Power section. Set it to high for normal, expected behavior. You can let the GNOME Power Manager still lower the brightness, but you will be able to increase it when needed.