Difference between revisions of "ATI Mobility Radeon 9600"

From ThinkWiki
Jump to: navigation, search
m (Reformatting.)
m (Typo.)
Line 22: Line 22:
 
Display on the internal LCD works as long as you set the monitor settings correct
 
Display on the internal LCD works as long as you set the monitor settings correct
  
==h= External VGA port ===
+
=== External VGA port ===
 
Works if you setup the xorg.conf for two screens.
 
Works if you setup the xorg.conf for two screens.
  

Revision as of 10:21, 2 March 2008

This is an ATI video adapter

Features

  • Chipset: ATI RV350 (M10)
  • PCI ID: 1002:4c66
  • AGP 4X
  • 32 or 64MB DDR-SDRAM video memory
  • External VGA up to: 1920x1200

Linux driver - OpenSource

This adapter is supported by recent versions of the radeon driver as found in X.Org and XFree86. The fglrx driver should also work.

ThinkPad LCD

Display on the internal LCD works as long as you set the monitor settings correct

External VGA port

Works if you setup the xorg.conf for two screens.

SVideo port

SVideo out is supported by the ati.2 driver from the GATOS project.
Read here how to set it up.

3D acceleration with the open source driver

All recent Distributions such as Fedora Core 5, *Ubuntu Dapper Drake, OpenSUSE have the r300 supported without patching. The r300 DRI driver was merged into Mesa 6.4.x. The X Window System (Xorg) 7.0 supports the r300 driver. Recent 2.6 kernels now have r300 DRM support added. This now should work out of the box if your using a recent distribution.

The old project page may be outdated now, development is now done in X.org.

http://r300.sourceforge.net/

Linux driver - Proprietary

The fglrx driver adds 3D acceleration.

FreeBSD driver - open source

With RELENG_6 it is possible to get this card working with a reasonable level of ease. First you must apply this patch: http://people.freebsd.org/~anholt/dri/r300-drm.diff to your kernel source and compile a new kernel. I have only tested using this as a module. It works as the simple drm/radeon module. Once that is done install x11-servers/xorg-server-snap and graphics/dri-devel on top of a normal Xorg installation. With all that you SHOULD have dri working on a mobility 9600. Tested on a T42.

ThinkPads this chip may be found in