Difference between revisions of "Ipw2200"
(→Packages) |
(adding link to Bill Moss' HowTo) |
||
Line 78: | Line 78: | ||
In etch the firmware can also be placed in /lib/firmware | In etch the firmware can also be placed in /lib/firmware | ||
+ | |||
+ | === Installation on Fedora Core === | ||
+ | Installation on Fedora Core 5 works out of the box. However, certain parts of the install process may not set up the wireless networking in a friendly manner using GNOME system tray icons and other tools. Bill Moss has written an excellent HowTo, including using VPNC to connect to a remote Cisco IPSec network. | ||
+ | |||
+ | * [http://www.ces.clemson.edu/linux/nm.shtml Fedora Core 5 NetworkManager, NetworkManager-vpnc and Wireless Driver IPW2200] | ||
+ | |||
===Testing the driver === | ===Testing the driver === |
Revision as of 20:50, 5 August 2006
Intel PRO/Wireless 2200/2915 Driver for WiFiLinux driver for the 802.11bg and 802.11abg NICs - miniPCI cards - found in Centrino laptops. This driver only works on 2.6.x kernels (2.6.4 or newer). Starting with kernels 2.6.14 the driver is included in kernel. The following adapters sold by IBM use these chips: |
Project Homepage / Availability
http://ipw2200.sourceforge.net/
Packages
- Fedora Packages(1): Fedora Core includes the ipw2200-drivers in FC3 (with updates) and FC4. You still need to grab the firmware from http://rpm.livna.org/
- Fedora Packages(2): http://www.atrpms.net/name/ipw2200/
- Mandriva: The ipw2200 driver modules are included in the stock kernel package; the firmware is included in the commercial distribution or available from http://plf.zarb.org/.
- Gentoo: The driver is in the portage tree: emerge net-wireless/ipw2200 and net-wireless/ipw2200-firmware
- Debian Packages: http://packages.debian.org/ipw2200-source
Status
In development, usable, WEP 128bit encryption works, WPA does also work with drivers >= 1.0.2 and wpa_supplicant, monitor/rfmon is supported as with version >= 1.0.6. Generally works well, but some users experience problems (especially with firmware restarts and with WPA functionality using wpa_supplicant). Passing the hwcrypto=0 module parameter improves reliability for many users.
The ipw2200 driver up to version 1.0.6 (in combination with some newer kernels) had a problem getting DHCP leases (it turned out to be a bug in the broadcasting code). Version 1.0.7 seems to have fixed this.
Older ipw2200 driver versions shipped by many distributions have been reported to freeze a T43 after several minutes of intensive communication. Installing version 1.1.2 of the driver solved the problem.
Latest stable versions:
- ipw2200 driver: 1.1.0
- firmware: 2.4
- ieee80211 stack: 1.1.12
Latest development versions:
- ipw2200 driver: 1.1.3
- firmware: 3.0
- ieee80211 stack: 1.1.14
Mainline kernels contain older (but mostly functional) versions of ipw2200 and ieee80211, and still require the addition of the firmware files. To get the latest versions you need to separately install the ipw2200 module and ieee80211 stack.
Installation
Installation from sourcecode
Download the latest ieee80211 stack and install it:
# tar xzvf ieee80211-1.1.14.tgz
# cd ieee80211-1.1.14
# make
# make install
Download the latest ipw2200 module and install it:
# tar xzvf ipw2200-1.1.3.tgz
# cd ipw2200-1.1.3
# make
# make install
Download the matching firmware and install it:
# tar xzvf ipw2200-fw-3.0.tgz -C /lib/firmware
Installation on Debian
Install ieee80211-source:
# apt-get install ieee80211-source
# module-assistant -t build ieee80211-source
Install ipw2200-source:
# apt-get install ipw2200-source
# module-assistant -t build ipw2200-source
There is a bug in the Debian package (last checked: Dec 30th 2005) that prevents from linking to ieee80211 modules using module-assistant. In case it is not fixed in your version, fall back to the regular source installation procedure described above.
The firmware is not distributed with debian due to licensing reasons, download the matching firmware and install it:
# tar xzvf ipw2200-fw-2.4.tgz -C /lib/hotplug/firmware
see /etc/hotplug/firmware.agent for details on configured firmware locations
In etch the firmware can also be placed in /lib/firmware
Installation on Fedora Core
Installation on Fedora Core 5 works out of the box. However, certain parts of the install process may not set up the wireless networking in a friendly manner using GNOME system tray icons and other tools. Bill Moss has written an excellent HowTo, including using VPNC to connect to a remote Cisco IPSec network.
Testing the driver
# modprobe ipw2200
# iwconfig
# dmesg
output might look similar to this:
ieee80211: 802.11 data/management/control stack, 1.1.6 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
NB: To make the wifi LED work on the thinkpad, pass the option led=1
to the kernel while loading the module. eg. # modprobe ipw2200 led=1
. This can also be accomplished by adding that option to the file where your distribution looks for modprobe options so that it becomes automatic.
In debian this can be done by putting a file named after the module in /etc/modutils with the options in it
here we might run a cmd like this
# echo options ipw2200 led=1 > /etc/modutils/ipw2200
then we must run update-modules to remake /etc/module.conf
# update-modules
WPA support
Use wpa_supplicant with the -Dwext argument (not -Dipw), and pass the hwcrypto=0 argument to the ipw2200 module.
Power Management
To enable power management, issue:
# iwpriv wlan0 set_power 7
where wlan0 is the name if your interface. This will reduce idle power consumption by several Watts compared to no power management.
- To disable the radio (and further reduce power consumption) when the card is not in use, issue:
# echo 1 > /sys/bus/pci/drivers/ipw2200/*/rf_kill
- To enable the radio, issue:
# echo 0 > /sys/bus/pci/drivers/ipw2200/*/rf_kill
- To make the radio off by default after boot, add
options ipw2200 disable=1
to your /etc/modprobe.conf or equivalent.
See README.ipw2200 in the ipw2200 package for details and other options.
Additional Comments
Your kernel may include an old version of the ipw2200 driver. It is recommended to use the latest version.
Make sure you also install the firmware version needed by the driver version you use. You can find the firmware here. To install it, decompress the .tgz file into /lib/firmware.
The driver doesn't appear to support the MII interface, so any tools like automatic network configuration managers (i.e. whereami) that rely on mii-tool do not work.