Difference between revisions of "UltraBay II HDD Adapter"

From ThinkWiki
Jump to: navigation, search
m (Bugmenot2 moved page UltraBay II HDD adapter tray to UltraBay II HDD Adapter: renamed device for less ambiguity)
(changed category)
Line 3: Line 3:
 
|style="vertical-align:top" |
 
|style="vertical-align:top" |
 
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
 
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay II HDD Adapter Tray ===
+
=== Ultrabay II HDD Adapter ===
 
This is an adapter to connect an additional HDD to the Ultrabay II
 
This is an adapter to connect an additional HDD to the Ultrabay II
  
Line 15: Line 15:
  
 
=== IBM Partnumbers ===
 
=== IBM Partnumbers ===
11J8941
+
*11J8941
  
 
=== Linux Support ===
 
=== Linux Support ===
 
If connected at boot time, the drive is {{path|/dev/sdb}}.  Hotplugging between this & another non-IDE device works fine (the kernel doesn't realise it's disconnected), between this and DVD the kernel will recognise the new drive, but panic.
 
If connected at boot time, the drive is {{path|/dev/sdb}}.  Hotplugging between this & another non-IDE device works fine (the kernel doesn't realise it's disconnected), between this and DVD the kernel will recognise the new drive, but panic.
 
=== Also known (in IBM literature) as.... ===
 
  
 
=== Supported with ===
 
=== Supported with ===
Line 26: Line 24:
 
*[[SelectaDock III]]
 
*[[SelectaDock III]]
  
 
+
[[Category:Ultrabay Devices]]
[[Category:Components]]
 

Revision as of 19:28, 4 April 2020

Ultrabay II HDD Adapter

This is an adapter to connect an additional HDD to the Ultrabay II

Features

  • Takes any 700 series HDD's that are contained in a 770-style "sardine-tin" or a 760-style push-on HDD.
  • Can be used with any 2.5" HDD, if you gut a push-on HDD for the adapter.

IBM Partnumbers

  • 11J8941

Linux Support

If connected at boot time, the drive is /dev/sdb. Hotplugging between this & another non-IDE device works fine (the kernel doesn't realise it's disconnected), between this and DVD the kernel will recognise the new drive, but panic.

Supported with