Talk:ThinkPad Dock II

From ThinkWiki
Revision as of 09:06, 4 November 2005 by 84.191.161.37 (Talk) (Who wrote this about the 1920 x 1200 on the dock II?: this is a personal remark that doesn't belong in the article)
Jump to: navigation, search

I just installed a Nvidia Quadro NVS 50 PCI card in an attempt to add an additional monitor to my laptop (T41), and get 1920 x 1200 digital on my 24" widescreen. The Nvidia is not a dual monitor card, but I thought I would be able to use it as well as the laptop's existing card (ATI Mobility Radeon 7500). However the ATI card shows up in the hardware manager with the message "This device cannot start. (Code 10)". I then tried to enable the AGP as the primary video device in the BIOS (PCI was enabled). The on-board adapter came up, and the device manager listed no conflict, but the Nvidia would not come up as I tried to extend my desktop in display props. I got the message that I did not have admin rights to select the Nvidia, followed by messages that my drivers were not compatible with the newer version of Windows. I have never tried to use two monitors before, so I am not sure if it is feasible to have two video cards running at the same time. If this is possible, please let me know what I need to do, if it is not possible then I need to return the card and get one of your recommended ones.

TIA! Tony


Hi Tony, can't help you much, i'm afraid. I have had a Radeon 9200 PCI card in the dock for a while, using it under Win. I think setting the AGP bus as the primary one in the BIOS is the way you should go. I had troubles with my Windows not booting up at all anymore when i changed it to PCI and was sure that it was the ATI driver having problems.

I would try to get the most recent drivers from the NVidia homepage. Best try uninstalling your drivers and reinstalling them. You might also check if your card is supported by the OMEGA drivers (http://www.omegadrivers.net).

Good luck, Wyrfel.

Modify for compatibility?

I have an X41 Tablet on the way and am very disappointed that the only "Dock" available is more like a glorified port replicator. While I'm sure the X41 Tablet wouldn't fit on the Dock II, do you think it would be possible to remove the docking port from the plastic and connect it to the X41, or is it a different style connector? I would really appreciate audio jacks and a PCI slot. ^

Who wrote this about the 1920 x 1200 on the dock II?

This is a very important subject to me since we used to buy a lot of T series Thinkpads but dont any longer because of the lack of support for the widescreen external DVI flat panels.

Who wrote this about the new driver from 8-11-05 - I have contacted IBM tech support (not Lenovo) and they have not heard such a thing and it is not listed - they have looked at the last video driver update to the T42p or T43p (I am looking for the 14" SXGA+ T42p model) with a dock II being able to drive externally 1920 x 1200 (UXGA+) WITHOUT an added PCI card. This would be NIRVANA for me.

Do you have anymore information about this driver and have you SEEN it work at all?

Thanks Dean

dean@sigma-usa.com


Hei Dean,

i do not have a 1920x1200 display, but i have a 1600x1200 one which was unsupported before as well. The newest driver (upgraded via IBM Software Installer) indeed doesn't have the problem anymore which it had before with that resolution (1280x1024 was supported max). The newest Presentation Director supports the higher resolution as well.

I actually switched back from OMEGA drivers to the newest IBM release and experienced some strange behaviour which was gone after a few reboots). I guess some parts of OMEGA were not properly uninstalled in one go.

IBM might not know about this if they just upgraded the underlying Catalyst drivers.

However, you might wanna get a confirmation from someone using 1920x1200 before you celebrate. ;-)

Wyrfel 01:16, 4 Oct 2005 (CEST)


BTW: I merged the information that was provided here on this issue into the Problem with DVI throughput page, since it was doubled in several places and belongs there. Wyrfel 01:48, 4 Oct 2005 (CEST)


=newest drivers work with high resolution via DVI

The above is a true statement. I have in Nov 2005 installed 3 Thinkpad T's (T42p and T43p) with 128 megs of ATI video RAM (Fire 3200) and with the Think Dock II using the pass through DVI port, i am driving Dell 20" WSXGA+ (1600 x 1050 widescreen) and Sony WUXGA (1900 x 1200) 23" widescreen flat panels. They work OUT OF THE BOX without having to install special drivers. This is a new feature of the Thinkpad line (at least for the T series).


Low Profile PCI? IBM says Half size.

I don't think that LowProfile PCI-Cards will fit in the Dock II cause of the shorter mounting bracket. I just successfully plugged a standard PCI card with the dimension 17.5 cm (without brackets and vga connector) x 9,9 cm (without pci connector, 10,7 cm with pci connector) This seems to be the maximum dimensions possible...think the 'half size' written by ibm means the length of the card, not the width, as there are full size pci cards e.g. for video editing that reach all the way to the front through a standard tower case.