Difference between revisions of "Talk:Problems with ACPI suspend-to-ram"
| Line 6: | Line 6: | ||
--[[User:Defiant|Defiant]] 13:40, 02 Jun 2006 (CEST) | --[[User:Defiant|Defiant]] 13:40, 02 Jun 2006 (CEST) | ||
| + | ---- | ||
| + | I have a similar issue on my T60. It seems like the problem is with the framebuffer; that the card is attempting to use the lowest resolution possible when I have the framebuffer set much higher, but that's just my intuition. I'm using hibernate with both <code>EnableVbetool</code> and <code>VbetoolPost</code> set to <code>yes</code>. | ||
| − | + | An interesting thing is that if I manually call hibernate from an xterm inside X, I get no negative effects. It even fixes the console "big green boxes" if I previously suspended not in X. Also, on resume I see the following messages on the xterm (all previous output is cleared): | |
| − | |||
| − | |||
Allocated buffer at 0x11010 (base is 0x0) | Allocated buffer at 0x11010 (base is 0x0) | ||
| Line 25: | Line 25: | ||
Function not supported | Function not supported | ||
| − | + | Any ideas? | |
| + | |||
| + | -- [[User:Deason|Deason]] 05:39, 14 July 2006 (CEST) | ||
| + | ---- | ||
| + | Just to update/confirm: suspend to RAM only works if I have X running, and I switch to the console running X after resuming. Editing the ACPI sleep script to switch to vt 7 before switching back to the original console seems to work fine, though. It just means that I can't suspend to RAM if I'm not running X. (Putting a check for that in the ACPI sleep script would also be a good idea.) I've tried using <code>EnableVbetool</code>, <code>VbetoolPost</code>, <code>RestoreVCSAData</code>, and <code>RestoreVbeStateFrom</code> from hiberante, but none seem to solve this without switching to X. | ||
| − | + | -- [[User:Deason|Deason]] 21:48, 16 July 2006 (CEST) | |
Revision as of 21:48, 16 July 2006
After a few resumes with my T43, I get "big green boxes" on my consoles tty1 and tty2. tyy3 to tty6 stays completly black (there should be login prompt). But X still working fine.
This is a minor issue, but anyone with the same problem and a fix/workaround?
--Defiant 13:40, 02 Jun 2006 (CEST)
I have a similar issue on my T60. It seems like the problem is with the framebuffer; that the card is attempting to use the lowest resolution possible when I have the framebuffer set much higher, but that's just my intuition. I'm using hibernate with both EnableVbetool and VbetoolPost set to yes.
An interesting thing is that if I manually call hibernate from an xterm inside X, I get no negative effects. It even fixes the console "big green boxes" if I previously suspended not in X. Also, on resume I see the following messages on the xterm (all previous output is cleared):
Allocated buffer at 0x11010 (base is 0x0) ES: 0x1101 EBX: 0x0000 Calling INT 0x15 (F000: 5E79) EAX is 0x1005F08 Calling INT 0x15 (F000: 5E79) EAX is 0x1005F08 Calling INT 0x15 (F000: 5E79) EAX is 0x5F08 Calling INT 0x15 (F000: 5E79) EAX is 0x5F08 Calling INT 0x15 (F000: 5E79) EAX is 0x45F08 Function not supported
Any ideas?
-- Deason 05:39, 14 July 2006 (CEST)
Just to update/confirm: suspend to RAM only works if I have X running, and I switch to the console running X after resuming. Editing the ACPI sleep script to switch to vt 7 before switching back to the original console seems to work fine, though. It just means that I can't suspend to RAM if I'm not running X. (Putting a check for that in the ACPI sleep script would also be a good idea.) I've tried using EnableVbetool, VbetoolPost, RestoreVCSAData, and RestoreVbeStateFrom from hiberante, but none seem to solve this without switching to X.
-- Deason 21:48, 16 July 2006 (CEST)
