Difference between revisions of "Talk:Problem with display remaining black after resume"

From ThinkWiki
Jump to: navigation, search
(R50e : this is not enough !)
 
Line 5: Line 5:
 
  * No option acpi_sleep
 
  * No option acpi_sleep
 
  * to save the PCI state like:
 
  * to save the PCI state like:
cat /proc/bus/pci/00/02.0 > /var/cache/video.config
+
  * cat /proc/bus/pci/00/02.0 > /var/cache/video.config
 
  * Once you get back, restore it:
 
  * Once you get back, restore it:
cat /var/cache/video.config > /proc/bus/pci/00/02.0
+
  * cat /var/cache/video.config > /proc/bus/pci/00/02.0
  
 
However, the X screen is not clean after the restore, so this is not very useable...
 
However, the X screen is not clean after the restore, so this is not very useable...

Revision as of 12:29, 8 August 2005

From my experience, this does not work with TP R50e.

If you want to be able to resume, you need :

* To start from a VT
* No option acpi_sleep
* to save the PCI state like:
 * cat /proc/bus/pci/00/02.0 > /var/cache/video.config
* Once you get back, restore it:
 * cat /var/cache/video.config > /proc/bus/pci/00/02.0

However, the X screen is not clean after the restore, so this is not very useable...