Talk:Problem with LCD brightness buttons

From ThinkWiki
Revision as of 05:01, 25 March 2007 by WilliamPoetra (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Problem with LCD brightness buttons after suspend-to-ram

On my X60 1706-BM7, it's possible to suspend-to-ram either using s2ram or just "echo mem > /sys/power/state". There's a problem I've noticed, that after I resumed the machine, the LCD brightness buttons take longer to respond. Symptoms are:

  • Before suspending, whenever I press the LCD brightness up/down keys, the screen promptly respond by dimming or brighten up.
  • After resuming, whenever I press the same keys again, it takes about 1 sec. for the screen to dim or brighten up.
  • After resuming, if I use the command "echo down > /proc/acpi/ibm/brightness" or "echo up > /proc/acpi/ibm/brightness", the screen will respond right away, just like before suspending.
  • Without suspending, using "vbetool post" doesn't give this behaviour.

So I think this problem is related to the buttons itself. Does anyone have a similar experience? Any solutions? --WilliamPoetra 10:55, 25 March 2007 (CST)

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Talk:Problem_with_LCD_brightness_buttons&oldid=28901"