Difference between revisions of "Talk:Patch for controlling fan speed"

From ThinkWiki
Jump to: navigation, search
m (Updated script for unpatched kernels: fixed sed call)
m (Using sudo: fix example usage of /proc/acpi/ibm/fan)
 
(20 intermediate revisions by 10 users not shown)
Line 1: Line 1:
 +
==Using sudo==
 +
Any idea why I have to use '''sudo -s''' first instead of just using '''sudo <command>'''?
 +
 +
* Just using {{cmduser|sudo echo level 5 > /proc/acpi/ibm/fan}} runs the echo command as root, but the writing to the proc file is done as your user. Running {{cmduser|sudo -s}} gives you a root shell where the write to the fan file is done as root. - [[User:Kelsin|Kelsin]] 01:16, 17 August 2008 (CEST)
 +
* One might, however, do {{cmduser|sudo sh -c 'echo level 5 > /proc/acpi/ibm/fan'}} instead.
 +
 
==Windows XP port==
 
==Windows XP port==
 
How would I port this patch to Windows XP?  
 
How would I port this patch to Windows XP?  
Line 41: Line 47:
  
 
== Updated script for unpatched kernels ==
 
== Updated script for unpatched kernels ==
 +
Moved to the [[ACPI fan control script]] article page, after joint development by [[User:Spiney|Spiney]] and [[User:Thinker|Thinker]].
  
A couple of command line options added, plus this version is able to daemonize and writes a pid file (to a custom location if needed). It's for an unpatched version of the kernel, since I think that's the way to go, but it should be easy to merge into the other version as well since it doesn't change any internals.
+
== whats the problem kernel 2.6.14 ==
  
Any feedback appreciated.
+
hi all,
  
Here we go:
+
i patched the kernel with the patch for 2.6.14 with the option:
 +
/usr/src/linux # patch -p0 -l -i ../ibm_acpi.patch (which i copy&pasted)
  
<pre>
+
they dont show me errors or so. but after i reboot and load the modul ibm_acpi i cant see any /proc/acpi/ibm/fan
#!/bin/bash
 
  
# This script dynamically controls fan speed on some ThinkPad models
+
whats the problem? copy&past ( tab -> space?)
# according to user-defined temperature thresholds.  It implements its
+
or is it a problem in my kernel config?
# own decision algorithm, overriding the ThinkPad embedded
 
# controller. It also implements a workaround for the fan noise pulse
 
# experienced every few seconds on some ThinkPads.
 
#
 
# WARNING: This script relies on undocumented hardware features and
 
# overrides nominal hardware behavior. It may thus cause arbitrary
 
# damage to your laptop or data. Watch your temperatures!
 
#
 
# This file is placed in the public domain and may be freely distributed.
 
  
LEVELS=(    0      2      4      7)  # Fan speed levels
+
greetings and big thx from .ch,
UP_TEMPS=(      52    60    68  )  # Speed increase trip points
 
DOWN_TEMPS=(  48    56    64    )  # Speed decrease trip points
 
  
ANTIPULSE=( 0      1      0      0)  # Prevent fan pulsing noise at this level
 
                                    #  (this also prevents fan speed updates)
 
  
IBM_ACPI=/proc/acpi/ibm
+
system: ibm thinkpad t43p
PID_FILE=/var/run/tp-fancontrol.pid
+
kernel: 2.6.14
INTERVAL=3
 
VERBOSE=true
 
DRY_RUN=false
 
DAEMONIZE=false
 
  
usage() {
+
--[[User:62.203.29.204|62.203.29.204]] 19:22, 9 Nov 2005 (CET)kru
        echo "Usage: $0 [OPTION]..."
 
        echo
 
        echo "Available options:"
 
        echo "  -t    test mode"
 
        echo "  -q    quiet mode"
 
        echo "  -d    daemon mode, go into background, implies -q"
 
        echo "  -p    pid file location for daemon mode, default: $PID_FILE"
 
}
 
  
set -- `getopt -u -n $0 qtdp:h "$@"`
+
You need to pass the "<tt>experimental=1</tt>" module parameter to ibm-acpi:
 +
# modprobe ibm_acpi experimental=1
 +
--[[User:Thinker|Thinker]] 21:01, 9 Nov 2005 (CET)
  
while true; do
+
big thx!!! problem solved.
        case "$1" in
 
                -t)
 
                        DRY_RUN=true
 
                        echo "$0: Dry run, will not change fan state."
 
                        shift
 
                        ;;
 
                -q) # quiet mode
 
                        VERBOSE=false
 
                        shift
 
                        ;;
 
                -d) # go into background and daemonize
 
                        DAEMONIZE=true
 
                        shift
 
                        ;;
 
                -p) # different pidfile
 
                        PID_FILE="$2"
 
                        shift 2
 
                        ;;
 
                -h) # short help
 
                        usage
 
                        exit 1
 
                        ;;
 
                --) # no more options
 
                        shift
 
                        break
 
                        ;;
 
        esac
 
done
 
  
if $DRY_RUN; then
+
--[[User:62.203.29.204|62.203.29.204]]
        VERBOSE=true
 
        DAEMONIZE=false
 
fi
 
  
if $DAEMONIZE ; then
+
== Fan control does not work with Suse 10.1 ? ==
        (
 
                exec $0 -q -p $PID_FILE 0>&- 1>&- 2>&-
 
        ) &
 
        echo $! > $PID_FILE
 
        exit 0
 
fi
 
  
# Enable the fan in default mode if anything goes wrong:
+
Hi,
set -e -E -u
 
$DRY_RUN || trap "rm -f $PID_FILE 2> /dev/null; echo enable > $IBM_ACPI/fan; exit 0" EXIT HUP INT ABRT QUIT SEGV TERM
 
  
thermometer() { # output list of temperatures
+
I successfully installed and used the fan control script on my T43p with Suse 10.0.
    read X Y < $IBM_ACPI/thermal
 
    if ! [[ "$X" == "temperatures:" ]]; then
 
        echo "$0: Bad temperatures: $X $Y" >&2
 
        exit 1
 
    fi
 
    echo "$Y";
 
}
 
  
speedometer() { # output fan speed RPM
+
Yesterday, I installed Suse 10.1 from scratch. Unfortunately fan control does not work with Suse 10.1:
    sed -n 's/^speed:[ \t]*//p' $IBM_ACPI/fan
 
}
 
  
setlevel() { # set fan speed level
+
\# echo level 2 > /proc/acpi/ibm/fan
    $DRY_RUN || echo 0x2F $1 > $IBM_ACPI/ecdump
+
bash: echo: write error: Invalid argument
}
 
  
IDX=0
+
Are there any substantial differences between Suse 10.0 and 10.1 with respect to ibm_acpi?
MAX_IDX=$(( ${#LEVELS[@]} - 1 ))
 
SETTLE=0
 
  
while true; do
+
* You need to pass the fan_control=1 parameter to the thinkpad_acpi module when it's loaded into the kernel. This can be done manually with
    TEMPS=`thermometer`
 
    $VERBOSE && SPEED=`speedometer`
 
  
    # Calculate new level
+
# modprobe thinkpad_acpi fan_control=1
    NEWIDX=$IDX
 
    DOWN=$(( IDX > 0 ))
 
    for TEMP in $TEMPS; do
 
        # Increase speed as much as needed
 
        while [[ $NEWIDX -lt $MAX_IDX ]] &&
 
              [[ $TEMP -ge ${UP_TEMPS[$NEWIDX]} ]]; do
 
            (( NEWIDX ++ ))
 
            DOWN=0
 
        done
 
        # Allow decrease (by one index)?
 
        if [[ $DOWN == 1 ]] &&
 
          [[ $TEMP -gt ${DOWN_TEMPS[$(( IDX - 1 ))]} ]]; then
 
            DOWN=0
 
        fi
 
    done
 
    if [[ $DOWN == 1 ]]; then
 
        NEWIDX=$(( IDX - 1 ))
 
    fi
 
  
    # Transition
+
You'll have to read up on suse config to figure out how to do that automatically. With Gentoo it involves putting a file in {{path|/etc/modprobe.d/}} then running {{cmdroot|update-modules}} to have it update {{path|/etc/modprobe.conf}}. Other distros might have you just edit {{path|/etc/modprobe.conf}} directly but I wouldn't know. - [[User:Kelsin|Kelsin]] 01:16, 17 August 2008 (CEST)
    OLDLEVEL=${LEVELS[$IDX]}
 
    NEWLEVEL=${LEVELS[$NEWIDX]}
 
    $VERBOSE && echo "tpfan: Temps: $TEMPS  Fan: $SPEED  Level: $OLDLEVEL->$NEWLEVEL"
 
    setlevel $NEWLEVEL
 
  
    sleep $INTERVAL
+
== Speed Control Patch for 2.6.18? ==
  
    # If needed, apply anti-pulsing hack after a settle-down period:
+
Hi All.
    if [[ ${ANTIPULSE[${NEWIDX}]} == 1 ]]; then
+
I'm trying to apply the speed control patch to vanilla 2.6.18 but it looks like it failed. Anyone who can point me to a direction for 2.6.18 patch?
        if [[ $NEWLEVEL == $OLDLEVEL ]]; then
+
Thanks
            if [[ $SETTLE -ge 0 ]]; then
 
                (( SETTLE -= INTERVAL ))
 
            else
 
                setlevel 0x40 # disengaged
 
                sleep 0.5
 
            fi
 
        else
 
            SETTLE=6
 
        fi
 
    fi
 
  
    IDX=$NEWIDX
+
== ibm-acpi-0.12a-2.6.17-fan.patch broken? ==
done
+
The code is not completed.
</pre>
 
 
 
As usual, I disclaim all warranty for this script, and release it to the public domain (meaning you may use and further distribute it under any terms you wish, including incorporating it into other software).
 
 
 
--[[User:Spiney|Spiney]], Nov 7 2005, 19:46 (CET)
 
----
 

Latest revision as of 17:55, 19 August 2008

Using sudo

Any idea why I have to use sudo -s first instead of just using sudo <command>?

  • Just using $ sudo echo level 5 > /proc/acpi/ibm/fan runs the echo command as root, but the writing to the proc file is done as your user. Running $ sudo -s gives you a root shell where the write to the fan file is done as root. - Kelsin 01:16, 17 August 2008 (CEST)
  • One might, however, do $ sudo sh -c 'echo level 5 > /proc/acpi/ibm/fan' instead.

Windows XP port

How would I port this patch to Windows XP?

--Jason

You can't. But you can write a Windows device driver based on the specs and ibm-acpi.

--Thinker 18:54, 7 Nov 2005 (CET)

gkrellm support

I can confirm that it works on Thinkpad T43 here. However after applying the patch, the fan speed monitor of gkrellm 2.2.7 cannot read value correctly. Maybe we gkrellm is reading the second line for speed but instead find the line for level, so it got confused? Would it be possible to interchange the lines so that speed still appears in the second line and level appears in the third instead? I'm no coder, just a suggestion to improve the patch.

--Jiang

I'd say it's a bug in gkrellm. It should parse the line header rather than relying on line numbers. But feel free to change (and test) the patch if you wish.

--Thinker 05:14, 26 Oct 2005 (CEST)

patch to keep gkrell working against 2.6.14

As in "works for me on a T43p", use with caution at your own risk. And thanks to thinker for the original patch, very nice work.

(See article for the actual patch)

--Spiney

Looks excellent, why not add it to the article page? Also, care to provide a license (preferably public domain like my patch) so the kernel guys can handle it? Speaking of which, the kernel people seem to like their patches generated via "diff -up vanilla-kernel-2.6.14 patched-kernel-2.6.14".

--Thinker 22:04, 1 Nov 2005 (CET)

Done, using the -p option for diff and "borrowing" your sentence for licensing purposes.

--Spiney


Updated script for unpatched kernels

Moved to the ACPI fan control script article page, after joint development by Spiney and Thinker.

whats the problem kernel 2.6.14

hi all,

i patched the kernel with the patch for 2.6.14 with the option: /usr/src/linux # patch -p0 -l -i ../ibm_acpi.patch (which i copy&pasted)

they dont show me errors or so. but after i reboot and load the modul ibm_acpi i cant see any /proc/acpi/ibm/fan

whats the problem? copy&past ( tab -> space?) or is it a problem in my kernel config?

greetings and big thx from .ch,


system: ibm thinkpad t43p kernel: 2.6.14

--62.203.29.204 19:22, 9 Nov 2005 (CET)kru

You need to pass the "experimental=1" module parameter to ibm-acpi:

# modprobe ibm_acpi experimental=1

--Thinker 21:01, 9 Nov 2005 (CET)

big thx!!! problem solved.

--62.203.29.204

Fan control does not work with Suse 10.1 ?

Hi,

I successfully installed and used the fan control script on my T43p with Suse 10.0.

Yesterday, I installed Suse 10.1 from scratch. Unfortunately fan control does not work with Suse 10.1:

\# echo level 2 > /proc/acpi/ibm/fan bash: echo: write error: Invalid argument

Are there any substantial differences between Suse 10.0 and 10.1 with respect to ibm_acpi?

  • You need to pass the fan_control=1 parameter to the thinkpad_acpi module when it's loaded into the kernel. This can be done manually with
# modprobe thinkpad_acpi fan_control=1

You'll have to read up on suse config to figure out how to do that automatically. With Gentoo it involves putting a file in /etc/modprobe.d/ then running # update-modules to have it update /etc/modprobe.conf. Other distros might have you just edit /etc/modprobe.conf directly but I wouldn't know. - Kelsin 01:16, 17 August 2008 (CEST)

Speed Control Patch for 2.6.18?

Hi All. I'm trying to apply the speed control patch to vanilla 2.6.18 but it looks like it failed. Anyone who can point me to a direction for 2.6.18 patch? Thanks

ibm-acpi-0.12a-2.6.17-fan.patch broken?

The code is not completed.