Difference between revisions of "SelectaBase 600"

From ThinkWiki
Jump to: navigation, search
(IBM SelectaBase 600)
(IBM SelectaBase 600)
Line 5: Line 5:
 
The SelectaBase 600 acts as a port replicator for 600 series ThinkPads and contains basic pass-through connections for the notebook ports. It comes without integrated power supply but provides the same AC port as found in a ThinkPad, so you need to use either your Thinkpad AC adapter or another IBM AC adapter. Besides all the pass-through ports the Port Replicator comes with an On/Off switch and a slot for a cable lock (only for the dock though).
 
The SelectaBase 600 acts as a port replicator for 600 series ThinkPads and contains basic pass-through connections for the notebook ports. It comes without integrated power supply but provides the same AC port as found in a ThinkPad, so you need to use either your Thinkpad AC adapter or another IBM AC adapter. Besides all the pass-through ports the Port Replicator comes with an On/Off switch and a slot for a cable lock (only for the dock though).
  
It contains a second docking port to allow it to be docked onto the [[SelectaDock I]], [[SelectaDock II]] or [[SelectaDock III]] docking station, acting as a middle layer between the notebook and the dock. Also, if not connected to the SelectaDock III, this port can be used to extend the SelectaBase 600 with a [[SelectaBase PC Card Enabler]] or [[SelectaBase PC Card Enabler with Advanced EtherJet]].
+
It contains a second docking port to allow it to be docked onto the [[SelectaDock I]], [[SelectaDock II]] or [[SelectaDock III]] docking station, acting as a middle layer between the notebook and the dock. Also, if not connected to the SelectaDock, this port can be used to extend the SelectaBase 600 with a [[SelectaBase PC Card Enabler]] or [[SelectaBase PC Card Enabler with Advanced EtherJet]].
 
    
 
    
 
===Features===
 
===Features===

Revision as of 04:36, 13 July 2005

IBM SelectaBase 600

The SelectaBase 600 acts as a port replicator for 600 series ThinkPads and contains basic pass-through connections for the notebook ports. It comes without integrated power supply but provides the same AC port as found in a ThinkPad, so you need to use either your Thinkpad AC adapter or another IBM AC adapter. Besides all the pass-through ports the Port Replicator comes with an On/Off switch and a slot for a cable lock (only for the dock though).

It contains a second docking port to allow it to be docked onto the SelectaDock I, SelectaDock II or SelectaDock III docking station, acting as a middle layer between the notebook and the dock. Also, if not connected to the SelectaDock, this port can be used to extend the SelectaBase 600 with a SelectaBase PC Card Enabler or SelectaBase PC Card Enabler with Advanced EtherJet.

Features

  • PS2-keyboard
  • PS2-mouse
  • Serial (9 pin)
  • Parallel (25 pin)
  • MIDI/Joystick
  • USB (1 port)
  • Diskette drive
  • VGA
  • Audio line-out
  • Docking Port (secondary)
  • Kensington Security hole
  • Security lock
  • Power button

Supported ThinkPads