Difference between revisions of "Rescue and Recovery"

From ThinkWiki
Jump to: navigation, search
(Remove stub entry)
(Workaround to GRUB issue?)
Line 11: Line 11:
  
  
Apparently, the MBR is not "configured properly" if LILO or GRUB has been installed in it. It is not known how to invoke Rescue and Recovery once LILO or GRUB has been installed in the MBR.
+
Apparently, the MBR is not "configured properly" if LILO or GRUB has been installed in it. It is not known how to invoke Rescue and Recovery once LILO or GRUB has been installed in the MBR. There is one [http://sharadware.com/2005/07/11/suse-linux-winxp-access-ibm-on-the-thinkpad-t43/#comment-165 report] of success after changing the partition type from 0x12 to 0x0b (FAT32).
  
 
==External Sources==
 
==External Sources==

Revision as of 14:47, 18 October 2005

Rescue and Recovery version 3.0 consists of a bootable partition containing various system recovery tools, including full recovery of the preinstalled Windows XP partition. It can be activated by pressing the Access IBM Button during system boot. It contains a FAT filesystem (labeled "IBM_SERVICE"), and has partition type 0x12 ("Compaq diagnostics" in fdisk).

ATTENTION!
Consideration 6 of the Readme states:

The Master Boot Record (MBR) must be configured properly for the Rescue and Recovery application to function properly. When possible, the Rescue and Recovery application attempts to ensure the proper configuration of the MBR. This can only occur if the Rescue and Recovery application is installed after other applications that

requires the MBR.


Apparently, the MBR is not "configured properly" if LILO or GRUB has been installed in it. It is not known how to invoke Rescue and Recovery once LILO or GRUB has been installed in the MBR. There is one report of success after changing the partition type from 0x12 to 0x0b (FAT32).

External Sources

Models featuring this technology