Difference between revisions of "Problem with video output switching"

From ThinkWiki
Jump to: navigation, search
(Problems with ATI chipsets)
(Problems with ATI chipsets)
Line 15: Line 15:
 
===Problems with ATI chipsets===
 
===Problems with ATI chipsets===
 
*It is a [http://bugs.freedesktop.org/show_bug.cgi?id=2000 known issue] of xorgs radeon driver that {{key|Fn}}{{key|F7}} doesn't work.
 
*It is a [http://bugs.freedesktop.org/show_bug.cgi?id=2000 known issue] of xorgs radeon driver that {{key|Fn}}{{key|F7}} doesn't work.
 +
 +
You can force the <tt>radeon</tt> driver to enable both CRT and LCD using <tt>Option "MonitorLayout" "LVDS,CRT"</tt> in the <tt>"Device"</tt> section of {{path|/etc/X11/xorg.conf}}. The analogous option for [[fglrx]] is <tt>Option "ForceMonitors" "lvds,crt1"</tt>
 +
 +
The {{cmdroot|radeontool light off}} and {{cmdroot|radeontool dac off}} commands will disable the LCD and CRT if they're been enabled before in the X server, but the corresponding {{cmdroot|radeontool light on}} and {{cmdroot|radeontool dac on}} will not work if the displays have were not enabled when the X server started. Also note that turing off the CRT using this command will not reduce power consumption, nor allow [[fglrx]] to enable power saving modes.
  
 
You might try the following: Hit Ctrl+Alt+F1 to switch to a console, hit Fn+F7 to switch video, hit Ctrl+Alt+F7 to switch back to X.
 
You might try the following: Hit Ctrl+Alt+F1 to switch to a console, hit Fn+F7 to switch video, hit Ctrl+Alt+F7 to switch back to X.

Revision as of 12:38, 30 May 2006

Affected Models

Problem Description

Problems with Intel chipsets

Disabling the internal LCD (e.g. when using an external Monitor) doesn't seem to work reliably.

  • i810switch doesn't have any effect. After disabling the LCD it is still on (but the status display of i810switch claims that is is switched off).
  • i855crt doesn't seem to allow to change the state of the internal LCD.
  • With ibm-acpi, # echo lcd_disable >/proc/acpi/ibm/video works, but # echo lcd_enable >/proc/acpi/ibm/video doesn't work - so one can't enable it anymore after disabling it. (the strange thing is that when switching to a console with ctrlaltF1 the LCD display is used for it, so there must be some way to enable it but I can't find out how to control this in X). I've tried this with version 0.8 and version 0.11 of ibm-acpi.

Problems with ATI chipsets

  • It is a known issue of xorgs radeon driver that FnF7 doesn't work.

You can force the radeon driver to enable both CRT and LCD using Option "MonitorLayout" "LVDS,CRT" in the "Device" section of /etc/X11/xorg.conf. The analogous option for fglrx is Option "ForceMonitors" "lvds,crt1"

The # radeontool light off and # radeontool dac off commands will disable the LCD and CRT if they're been enabled before in the X server, but the corresponding # radeontool light on and # radeontool dac on will not work if the displays have were not enabled when the X server started. Also note that turing off the CRT using this command will not reduce power consumption, nor allow fglrx to enable power saving modes.

You might try the following: Hit Ctrl+Alt+F1 to switch to a console, hit Fn+F7 to switch video, hit Ctrl+Alt+F7 to switch back to X.

Related Links

Solutions

None (yet).