|
|
| (One intermediate revision by the same user not shown) |
| Line 1: |
Line 1: |
| − | This article describes the installation of '''Ubuntu 10.10''' (64 bit) on a Thinkpad T410 type 2537-9UG (NVIDIA NVS 3100M).
| |
| − | ''This guide assumes that NVIDIA Optimus is disabled in BIOS (Graphics set to "discrete")!''
| |
| | | | |
| − | == Hardware Support Details ==
| |
| − |
| |
| − | === Works out-of-the-box ===
| |
| − | * Ethernet
| |
| − | * Audio
| |
| − | * DVD burner
| |
| − | * Card reader
| |
| − | * Webcam
| |
| − | * WLAN
| |
| − | * Bluetooth
| |
| − | * DisplayPort (tested with HDMI-TV)
| |
| − |
| |
| − | === Works with additional configuration ===
| |
| − | * Display brightness with NVIDIA
| |
| − | * HDAPS
| |
| − | * Docking station ''(Details soon)''
| |
| − |
| |
| − |
| |
| − | === Untested ===
| |
| − | * FireWire
| |
| − | * Fingerprint
| |
| − | * NVIDIA Optimus
| |
| − |
| |
| − | The remaining devices are currently not tested.
| |
| − |
| |
| − | === Display brightness with NVIDIA ===
| |
| − |
| |
| − | Use the following parameter in the "Device"-section of '''/etc/X11/xorg.conf''':
| |
| − | <pre>Option "RegistryDwords" "EnableBrightnessControl=1"</pre>
| |
| − |
| |
| − | === HDAPS (Hard Drive Active Protection System) ===
| |
| − |
| |
| − | You need the ThinkPad SMAPI and the hdaps-daemon, install them by following command:
| |
| − |
| |
| − | <pre>sudo apt-get install tp-smapi-dkms hdapsd</pre>
| |
| − |
| |
| − | Edit '''/etc/default/hdapsd''' with root privileges:
| |
| − |
| |
| − | <pre>
| |
| − | START=yes # hdaps should be started automatically
| |
| − | DISK=sda # normally sda should fit
| |
| − | SENSITIVITY=15 # higher values mean lesser sensitivity
| |
| − | FORCEENABLE="no" # force hdaps, not needed
| |
| − | OPTIONS="" # additional options, not needed
| |
| − | </pre>
| |
| − |
| |
| − | Restart the daemon:
| |
| − |
| |
| − | <pre>
| |
| − | sudo /etc/init.d/hdapsd restart
| |
| − | </pre>
| |
| − |
| |
| − | Testing (stop daemon and start in foreground):
| |
| − |
| |
| − | <pre>
| |
| − | sudo /etc/init.d/hdapsd stop
| |
| − | </pre>
| |
| − |
| |
| − | <pre>
| |
| − | sudo hdapsd -d sda -s 15
| |
| − | </pre>
| |
| − |
| |
| − | If you shake your T410 gently the output should look like:
| |
| − |
| |
| − | <pre>
| |
| − | sven@T410:~$ sudo hdapsd -d sda -s 15
| |
| − | Tue Nov 15 13:25:25 2011: Starting hdapsd
| |
| − | Tue Nov 15 13:25:25 2011: Selected interface: HDAPS
| |
| − | Tue Nov 15 13:25:25 2011: Selected HDAPS input device: /dev/input/event9
| |
| − | Tue Nov 15 13:25:28 2011: parking
| |
| − | Tue Nov 15 13:25:29 2011: un-parking
| |
| − | </pre>
| |
| − |
| |
| − | If test was succesful start daemon again:
| |
| − |
| |
| − | <pre>
| |
| − | sudo /etc/init.d/hdapsd start
| |
| − | </pre>
| |
| − |
| |
| − | === Docking station (tested with Lenovo Mini Dock Series 3) ===
| |
| − |
| |
| − | * Per hardware design the DisplayPort and DVI connector of the Mini Dock Series 3 are only usable with NVIDIA NVS 3100M
| |
| − | * If you want your boot screen on an external display in T410 BIOS set Graphics to "discrete" and boot screen to what you desire
| |
| − | * My T410 always showed the login screen on the internal LCD, for a workaround see "Workarounds" section
| |
| − | * To avoid conflicts with Unity I suggest using two different xorg.conf (see "Workarounds" section)
| |
| − |
| |
| − | [[Category:Ubuntu_10.10]][[Category:T410]]
| |
