Difference between revisions of "Installing Gentoo on a ThinkPad X60 Tablet"

From ThinkWiki
Jump to: navigation, search
(Gentoo General)
(Pen)
Line 77: Line 77:
 
     <*> User level driver support
 
     <*> User level driver support
 
   USB support  --->
 
   USB support  --->
   <*> Wacom Intuos/Graphire tablet support
+
   <M> Wacom Intuos/Graphire tablet support
  
 
Emerge setserial;
 
Emerge setserial;
Line 84: Line 84:
 
  setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig
 
  setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig
  
 
+
{{WARN|Xorg 7.3 works with current version (0.7.8_p3), but in a strange way. Keep Xorg 7.2 unless you are going to use your pen only as mouse and only in the normal rotation.}}
'''Be warned:''' Xorg 7.3 works with current version (0.7.8_p3), but in a strange way. Keep Xorg 7.2 unless you are going to use your pen only as mouse and only in the normal rotation.
+
'''Re to ATTENTION!''' I reply to myself. In the 0.7.8 branch they added the support for the multitouch feature. However this "feature" makes the usage of pen almost impossible (see [http://sourceforge.net/forum/forum.php?thread_id=1777969&forum_id=236872 this forum]). I prepared a patch which removes this feature and wrote an ebuild which can apply this patch: [https://bugs.gentoo.org/show_bug.cgi?id=147537 Bugzilla Bug 147537]. However still I have small problems in Xorg 7.3: [http://sourceforge.net/tracker/index.php?func=detail&aid=1823908&group_id=69596&atid=525124 bug 1823908]
  
 
Now add the following lines to your xorgcfg generated {{path|/etc/X11/xorg.conf}}:
 
Now add the following lines to your xorgcfg generated {{path|/etc/X11/xorg.conf}}:

Revision as of 05:27, 2 November 2007

Gentoo General

When installing gentoo make shure to use the suspend2-sources instead of the gentoo-sources, and that the USE flags are set correctly. In /etc/make.conf:

VIDEO_CARDS="i810 vesa"
INPUT_DEVICES="keyboard mouse wacom"
# X60
USE="$USE acpi fbsplash hdaps"

Now you can emerge the suspend2-sources, which will enable the nice splash when booting the machine.

emerge suspend2-sources

Note: In my case =suspend2-sources-2.6.22-r2 broke the serial ports so that the pen becames unusable (setserial did not work, even could not get the information). So I am continuing with =suspend2-sources-2.6.21-r7 or gentoo-sources-2.6.22 (did not try 2.6.23).

Some general apps are needed, these are installed:

emerge thinkpad
echo "thinkpad" >> /etc/modules.autoload.d/kernel-2.6

TODO:

echo "app-laptop/hdapsd" >> /etc/portage/package.keywords
emerge hdapsd app-laptop/tp_smapi
rc-update add hdapsd default
/etc/init.d/hdapsd start

Sound

NOTE: If you get an hda_intel probe error on boot, you have to enable modem support in bios (don't ask why!).

In the kernel configuration:

Device Drivers  --->
 Sound  --->
  Advanced Linux Sound Architecture  --->
   PCI devices  --->
    <*> Intel HD Audio

Now emerge alsa-utils and add alsasound to the default runlevel:

emerge -av alsa-utils
rc-update add alsasound default
/etc/init.d/alsasound start

Unmute the sound using alsamixer by pressing the m key on the Master and PCM sliders (MM=Muted / 00=Not muted)

Display

In the kernel configuration:

Device Drivers  --->
 Character devices  --->
  <*> Direct Rendering Manager
   <*> Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver)  --->

Now run xorgcfg which should start smoothly. Do your personal changes (none), and save the files to their default location. Edit /etc/X11/xorg.conf and add the following lines:

Section "dri"
   Mode 0666
EndSection

Now for the rotation to work, we need to emerge some stuff, and make some editing. First, emerge some apps (note: wee need linuxwacom >= 0.7.8)

echo "x11-drivers/linuxwacom" >> /etc/portage/package.keywords
emerge linuxwacom sudo xhost xrandr

Get the rotate script from ref. A, and make some adjustments:

cd /usr/local/bin
wget http://luke.no-ip.org/x60tablet/examples/rotate
chmod +x rotate
sed "s/cursor/Cursor/" -i rotate
sed "s/stylus/Stylus/" -i rotate
sed "s/eraser/Eraser/" -i rotate
sed 's/"%s set %s Rotate %s"/"sudo su -c \\"DISPLAY=:0.0 %s set %s Rotate %s\\""/' -i rotate
sed "s/'normal': 'NONE', 'left': 'CCW', 'right': 'CW', 'inverted': 'HALF'/'normal': '0', 'left': '2', 'right': '1', 'inverted': '3'/" -i rotate

Put yourself into the wheel group, and setup sudo to make you run xsetwacom without password.

TODO: xhost +

Input

Pen

In the kernel configuration:

Device Drivers  --->
 Input device support  --->
  <*> Event interface
  [*] Miscellaneous devices  --->
   <*> User level driver support
 USB support  --->
  <M> Wacom Intuos/Graphire tablet support

Emerge setserial;

emerge setserial

and add the following (magic) line to /etc/conf.d/local.start:

setserial /dev/ttyS0 port 0x0200 irq 5 autoconfig
ATTENTION!
Xorg 7.3 works with current version (0.7.8_p3), but in a strange way. Keep Xorg 7.2 unless you are going to use your pen only as mouse and only in the normal rotation.

Re to ATTENTION! I reply to myself. In the 0.7.8 branch they added the support for the multitouch feature. However this "feature" makes the usage of pen almost impossible (see this forum). I prepared a patch which removes this feature and wrote an ebuild which can apply this patch: Bugzilla Bug 147537. However still I have small problems in Xorg 7.3: bug 1823908

Now add the following lines to your xorgcfg generated /etc/X11/xorg.conf:

Section "InputDevice"
   Identifier  "Cursor"
   Driver      "wacom"
   Option      "Device" "/dev/ttyS0"
   Option      "Type" "cursor"
   Option      "ForceDevice" "ISDV4"
EndSection
Section "InputDevice"
   Identifier  "Stylus"
   Driver      "wacom"
   Option      "Device" "/dev/ttyS0"
   Option      "Type" "stylus"
   Option      "ForceDevice" "ISDV4"
EndSection
Section "InputDevice"
   Identifier  "Eraser"
   Driver      "wacom"
   Option      "Device" "/dev/ttyS0"
   Option      "Type" "eraser"
   Option      "ForceDevice" "ISDV4"
EndSection

And the following three lines in the end of the ServerLayout section:

InputDevice    "Cursor" "SendCoreEvents"
InputDevice    "Stylus" "SendCoreEvents"
InputDevice    "Eraser" "SendCoreEvents"

TODO: xournal

Touch Screen

It works for me from the box. I just unexpectedly discovered that it works. However in the "left" and "right" rotations of the screen the pointer appears approximately 3cm from the touch point. I do not know how to solve this.

Trackpoint

Works.

Fingerprint Reader

This actually is surprisingly easy to make work:) Just emerge thinkfinger >= 0.3;

echo "sys-auth/thinkfinger" >> /etc/portage/package.keywords
emerge thinkfinger

and add the following line in /etc/pam.d/system-auth:

auth       sufficient   pam_thinkfinger.so

The first section in the file should now look like the following:

auth       required     pam_env.so
auth       sufficient   pam_thinkfinger.so
auth       sufficient   pam_unix.so try_first_pass likeauth nullok

All left is to read your fingerprint for your user. Run tf-tool --add-user <login>, then reboot and see if it works. If using gdm, it should work smoothly.

Thinkpad buttons

You can enable them in the kernel either built-in or as a module:

Location:                                                             │
  -> Device Drivers                                                   │
    -> Character devices
     <M> /dev/nvram support

In case you chose the module you will need to autoload it since it is not loaded by the udev:

 echo nvram >> /etc/modules.autoload.d/kernel-2.6

By default the /dev/nvram device is configured for root only access. In order to change it permanentely add the corresponding rule to udev. For example I did:

 echo "KERNEL==\"nvram\", GROUP=\"users\"" >> /etc/udev/rules.d/50-local.rules

After that you can either configure them using app-laptop/tpb or KDE user can relay on the KMilo application configurable in the

"Control Center -> System Administration -> IBM Thinkpad Laptop".

Network

Ethernet

In the kernel configuration:

Device Drivers  --->
 Network device support  --->
  Ethernet (1000 Mbit)  --->
   <*> Intel(R) PRO/1000 Gigabit Ethernet support

Configure the ethernet card in /etc/conf.d/net:

config_eth0="dhcp"
eth0_dhcpcd="-t 4"

Wireless

Note: Make sure that the hardware disable-switch isn't disabled - it is placed at the front/bottom of the laptop (don't make the same mistake as i did!)

In the kernel configuration:

Device Drivers  --->
 Network device support  --->
  Wireless LAN (non-hamradio)  --->
   [*] Wireless LAN drivers (non-hamradio) & Wireless Extensions
Networking  --->
 <*> Generic IEEE 802.11 Networking Stack
  <M> IEEE 802.11i CCMP support
  <M> IEEE 802.11i TKIP encryption

Now, emerge ipw3945, wireless-tools > 22 and wpa_supplicant, and add ipw3945d to the default runlevel by issuing:

echo "net-wireless/wireless-tools" >> /etc/portage/package.keywords
emerge ipw3945 wireless-tools wpa_supplicant
rc-update add ipw3945d default
/etc/init.d/ipw3945d start

Configure the wireless card in /etc/conf.d/net:

config_eth1="dhcp"
eth1_dhcpcd="-t 4"
eth1_modules="wpa_supplicant"
wpa_supplicant_eth1="-Dwext"

If you are a kismet user it should be configured as follows in /etc/kismet.conf:

suiduser=<login>
source=ipw3945,eth1,ipw3945

VPN

To come...

Bluetooth

In the kernel configuration:

Networking  --->
 <*> Bluetooth subsystem support  --->
  <*> L2CAP protocol support
  <*> RFCOMM protocol support
   [*] RFCOMM TTY support
      Bluetooth device drivers  --->
       <*> HCI USB driver

Now emerge bluez-utils;

emerge bluez-utils

and configure your display name in the device section in /etc/bluetooth/hcid.conf:

name "Your Displayname"

Now we are ready to start

rc-update add bluetooth default
/etc/init.d/bluetooth start

External Connections

ACPI

Just emerge the acpi daemon:

emerge acpid
rc-update add acpid default
/etc/init.d/acpid start

Extra Features

History

5. July - Initial release.

24. July - Added Gentoo General, Sound, Some kernel configuration for the 2.6.21 kernel and new keycodes.

2. September - All sections are has been polished, and should work properly. Only the last ones are missing.

External Sources

A) Linux on the X60 Tablet

B) [1] Keycode Table