Difference between revisions of "Installing Gentoo on a ThinkPad A30p"

From ThinkWiki
Jump to: navigation, search
(Began X11 configuration.)
(X11 configuration)
Line 24: Line 24:
  
 
===X11 configuration===
 
===X11 configuration===
I use the ''radeon'' driver with XFree86 6.4.0. It supports dynamic resolution changes via XRANDR and automatically detects the display resolution of 1600x1200 (FlexView display).
+
I use the ''radeon'' driver with XFree86 6.4.0 for the installed ATI Radeon Mobility M6 LY. It supports dynamic resolution changes via XRANDR and automatically detects the display resolution of 1600x1200 (FlexView display).
  
 
The external VGA connector works but I had some problems with cloning view on lower resolutions with certain beamer models. They only worked when the internal display was switched off (FN-F7 toggles between the different modes).
 
The external VGA connector works but I had some problems with cloning view on lower resolutions with certain beamer models. They only worked when the internal display was switched off (FN-F7 toggles between the different modes).

Revision as of 20:08, 24 September 2004

Installing Gentoo Linux on a Thinkpad A30p

The thinkpad A30p is delivered with Windows 2000 or Windows XP Professional, respectively. These preinstalled versions can be reinstalled via the IBM workarea which is a bootable hidden partition (/dev/hda2, approximately 1GB).

Partitioning

You can partition the harddisk as you want. If you keep the portage tree (300MB+) and the distfiles directory (fills up with source code packages fast) on a separate partition, you can install Gentoo with X.org and KDE and some development tools on a 3GB partition and have at least 1GB free.

For easy maintenance you should keep /home separately.

Kernel configuration

I successfully used the kernel versions 2.6.4 and 2.6.7 on my A30p. Any recent kernel should run flawlessly as the A30p is not a difficult computer at all (no ACPI, no wireless).

The network card is a Intel Pro/100 VE which runs with the eepro100 module. The USB controller works with the uhci_hcd module.

For PCMCIA support you have to load the yenta_socket module and change the configuration file /etc/conf.d/pcmcia (replace PCIC=i82365 with PCIC=yenta_socket).

Sound support

The sound card which identifies as "Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 01)" can be used with the ALSA drivers, namely the snd_intel8x0 module.

Power management

The A30p has a stable APM implementation. Suspend/Resume works very good, even with X11 started.

The Mobile Pentium 3 speedstep feature can be used for additional power savings. You have to load the module speedstep_ich and speedstep_lib module and the desired scaling governor modules (cpufreq_performance, cpufreq_powersave). I use a script to switch to slow speed when on battery and to high speed (performance) when on AC power.

X11 configuration

I use the radeon driver with XFree86 6.4.0 for the installed ATI Radeon Mobility M6 LY. It supports dynamic resolution changes via XRANDR and automatically detects the display resolution of 1600x1200 (FlexView display).

The external VGA connector works but I had some problems with cloning view on lower resolutions with certain beamer models. They only worked when the internal display was switched off (FN-F7 toggles between the different modes).