Difference between revisions of "Installing Fedora 8 on a ThinkPad T61p"
(Removed redundant fingerprint reader config info and pointed at the dedicated article for this)
(Linked to the Synaptics driver article)
|Line 30:||Line 30:|
== Mouse ==
== Mouse ==
Important note: the
Important note: the driver , which is detected by defaultdoes not give the acceleration setting to a attached mouse or the trackpoint. Please replace the section for the synaptics driver with the following one:
Revision as of 10:35, 13 January 2008
This document outlines configuring Fedora 8 on your Thinkpad T61p. Most items will work out of the box and a base install will provide you with an almost completely working system. Due to the modular nature of the T61 there are many different configuration, please read carefully and only make the changes specific to your system.
Feel free to update this Wiki with your information however please ask questions on the Talk page.
Please look here for further informations as well:
Booting from the installation CD/DVD is only working in text mode due to the nVidia cards, you can use later vesa mode or nVidia drivers or livna nVidia drivers for X
You have following alternatives for your graphics in X:
- vesa mode, no 3D support
- nVidia drivers, download from the vendor
- nVidia drivers by livna (prefered)
The last options is provided by following packages: kmod-nvidia, xorg-x11-drv-nvidia. To enable full support of your display add vga=893 as bootloader option for your kernel.
As of kernel update: 126.96.36.199-85 and its linked drivers from livna funtion keys are working even in X and the nvidia driver.
Important note: the Synaptics TouchPad driver for X, which is detected by default, does not give the acceleration setting to a attached mouse or the trackpoint. Please replace the section for the synaptics driver with the following one:
Section "InputDevice" Identifier "Logitech" Driver "mouse" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" Option "Protocol" "auto" EndSection
To get further button support of more than three buttons of your super mouse you should have a look at following software: http://www.ollisalonen.com/btnx
Is fully working now. Muting is working and unmuting with the volume keys as well. If you are using KDE then you have to choose "Threaded Open Sound System" as audio system in the control center. I could not use PulseAudio (make sure you do not install kde-settings-pulseaudio or pulseaudio). With PulseAudio the sound was always delayed and the cpu usage was very high.
The volume keys are only standard keys with the keycodes 174 and 176. So you have to assign them to mixer control actions. For that KDE needs a keysymname to be able to assign it in its mixer controls. So you can add following lines to the file /etc/X11/Xmodmap:
keycode 174 = 0xffd2 keycode 176 = 0xffd3
Now the volume keys are sending F21 and F22 which I assigned to the global shortcut in the kmix configuration for volume up and down. Furthermore I added a link in the ~/.kde/Autostart folder to kmix to make sure it is always started (somehow it will not restart itself).
Ethernet and Wlan is fully supported. Wlan will be detected as wlan0.
Suspend to RAM
Suspend to Disk / Hibernate
Has display problems (black after resume until hard reset), perhaps tuxonice should give a try.
Is supported by the thinkfinger package. Gnome and KDM (kde login manager) seem to be working quite well, KDE is not fully supported yet.
See "How to enable the fingerprint reader with ThinkFinger" for configuration information and tips.
You probably want to enroll the root account so you can just su to the superuser without entering the root password.
I had to use the PAE kernel to be able to use all 4GB, otherwise a maximum of 3GB is only seen.