Difference between revisions of "Install Ubuntu 8.10 (Intrepid Ibex) on a ThinkPad T400"

From ThinkWiki
Jump to: navigation, search
(What works out of the box?)
(What needs some Tweaks?)
Line 101: Line 101:
 
To enable 1600x1200 resolution to show up, run
 
To enable 1600x1200 resolution to show up, run
 
  {{cmduser|sudo dpkg-reconfigure -phigh xserver-xorg}}
 
  {{cmduser|sudo dpkg-reconfigure -phigh xserver-xorg}}
 +
 +
====Scrolling with Trackpoint====
 +
 +
Create a new file called /etc/hal/fdi/policy/mouse-wheel.fdi typing:
 +
 +
sudo gedit /etc/hal/fdi/policy/mouse-wheel.fdi
 +
 +
And fill it with this code:
 +
 +
<match key="info.product" string="TPPS/2 IBM TrackPoint">
 +
  <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
 +
  <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
 +
  <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
 +
  <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
 +
  <merge key="input.x11_options.ZAxsisMapping" type="string">4 5</merge>
 +
  <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
 +
</match>
 +
 +
Source: [[http://psung.blogspot.com/2008/09/scrolling-with-thinkpads-trackpoint-in.html]]
 +
 +
(Based on code from [[http://mvogt.wordpress.com/2008/08/15/xorg-evdev-and-emulatewheel/ Michael Vogt]] and adapted to support both vertical and horizontal scrolling.)
  
 
==What doesn't work at the moment?==
 
==What doesn't work at the moment?==

Revision as of 15:40, 31 October 2008

T400 Site under construction. You are invited building an useful guidance!

Before Installation

Before you can start Ubuntu from CD or USB you have to change two BIOS settings:

  • Change to Internal or ATI Graphics with Config --> Display --> Graphics Device --> [Integrated graphics] or [Discrete Graphics]
  • Disable OS Detection for Switchable Graphics. Otherwise it will mysteriously switch back to Switchable Graphics.

Now you can boot your Live-CD, connect to Wireless Lan, and install the OS.

What works out of the box?

$ sudo dpkg-reconfigure -phigh xserver-xorg
  • ATI fglrx driver for Discrete Graphics (ATI Mobility Radeon 3470 graphics)
    • To enjoy 3D acceleration, you have to install the proprietary fglrx Driver. (for example with the jockey-gtk tool)
  • Touchpoint and Trackpad
    • Including scroll at the right side of the pad by default.
  • Optical drive
    • Not tested burning yet
  • Sound card
    • To use your internal microphone you have to change to "HDA Intel CONEXANT Analog (ALSA)" in audio-settings.
  • 7-in-1 card reader from Ricoh (MMC, Memory Stick, Mem Stick Pro, SD, SDHC, XD, XD Type H Memory)
    • Only tested SD cards.
  • Control buttons/Hotkeys
    • Volume control buttons
    • Screen brightness control (but changing brightness is a little bit diffuse. It's getting brighter but on maximum it changes to nearly lowest and get brighter again.)
    • Thinklight control
    • WLAN/BT/OFF toggle (Fn+F5 and mechanical toggle)
    • Media player control
  • Some ACPI features
    • Battery status, power graphs and history (tested with an single 6-Cell battery)
    • Lid states and events

What needs some Tweaks?

ThinkVantage Button ThinkVantage

Edit the file /usr/share/hotkey-setup/ibm.hk with adding this line:

setkeycodes e017 148 #thinkpad button

You have to restart, then you refer a program with the "System -> Preferences -> Keyboard Shortcuts"-Menu (eg. Terminal, Firefox,...).


ThinkPad 11b/g Wireless LAN mini PCI Express Adapter III (Aetheros Chipset)

The default drivers do not work properly, but Madwifi drivers do.

The following instructions were originally found here [1]:

1. Under System/Administration/HarwareDrivers disable "Support for Atheros 802.11 wireless LAN cards

2. Reboot

3. The kernel headers and the compiler are needed to build this driver so install build-essential. In a terminal window (Applications/Accessories/Terminal) enter:

$ sudo apt-get install build-essential

4. Install Subversion

$ sudo apt-get install subversion

5. Checkout the Madwifi drivers to a directory on your local disk

$ cd~
$ mkdir madwifi
$ cd madwifi
$ svn co https://svn.madwifi.org/madwifi/branches/madwifi-hal-0.10.5.6

6. Build the drivers

$ cd madwifi-hal-0.10.5.6
$ make

7. Install the drivers

$ make install

8. Add the Atheros kernel module to the list of modules to be automatically loaded at boot by adding "ath_pci" (without the quotes) to the end of the /etc/modules file and save the file

$ sudo gedit /etc/modules

9. Now you can reboot and it should work. To get it working without a reboot you need to load the module manually you can use

$ sudo modprobe ath_pci


VGA Output

To enable 1600x1200 resolution to show up, run

$ sudo dpkg-reconfigure -phigh xserver-xorg

Scrolling with Trackpoint

Create a new file called /etc/hal/fdi/policy/mouse-wheel.fdi typing:

sudo gedit /etc/hal/fdi/policy/mouse-wheel.fdi

And fill it with this code:

<match key="info.product" string="TPPS/2 IBM TrackPoint">
 <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
 <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
 <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
 <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
 <merge key="input.x11_options.ZAxsisMapping" type="string">4 5</merge>
 <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
</match>

Source: [[2]]

(Based on code from [Michael Vogt] and adapted to support both vertical and horizontal scrolling.)

What doesn't work at the moment?

Integrated Fingerprint Reader

Theres a new chipset build in, the "AuthenTec AES2810". So neither the thinkfinger nor the fprint Project support this Device at the moment.

lsusb:
Bus 002 Device 004: ID 08ff:2810 AuthenTec, Inc.

Switchable Graphics

I installed Ubuntu 8.10 with the on-board Intel Graphic chip. So 3D acceleration works out-of-the-box.

Then I booted with the ATI Graphics, which was no problem, because the radeon driver works very well, but only in 2D.

After installing fglrx packages, jockey also found out, that proprietary drivers are available. So i let him configure my xorg.conf:

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Device"
	Identifier  	"ATI Technologies Inc Mobility Radeon HD 3400 Series"
	BusID       	"PCI:01:00.0"
	Driver	        "fglrx"
EndSection

After reboot also Compiz works (but not so smooth as with Intel, i allege)

Problem: Strating up with integrated graphic again, no 3D desktop works. After removing all fglrx packages, Compiz normally works.

So i changed my xorg.conf using the radeon driver, succeeding to have 3D on onboard Graphics and 2D on ATI Graphics.

I also tried radeonhd driver, which does not work.

TODO
Maybe anybody can get both working!

Suspend/Hibernate

Neither Suspend nor Hibernate work for me. They fall asleep, but when waking up only the mousepointer is on the screen, put neither keyboard, nor mouse showing response.

But sometimes it works without any problems. I tested it out about 15 times... two suspends and one hibernate worked.

I don't know what's going wrong.

TODO
Anybody an idea?

Menu-Key

I changed keyboard modell to "IBM Thinkpad R60/T60/R61/T61" using the "German Dead acute" Layout.

But also with these settings my menu-key does not work. I tried to refer it with Firefox using the keyborad shortcuts-tool. It writes: "XF86WakeUp"

Problem: The FN-Key also writes "XF86WakeUp", which is not so practical, so I removed allocation!

TODO
Is ist possible to have an real menu-key?

Not tested yet

Active Protection System

There is no patch for Kernel 2.6.27-7 at the moment to use HDAPS. See also How to protect the harddisk through APS.

VGA/HDMI

  • NEC MultiSync LCD 2190UX - VGA tested and working in mirrored and extended desktop modes (had to run $ sudo dpkg-reconfigure -phigh xserver-xorg to get 1600x1200 resolution to show up)
TODO
please test other external monitors!