Difference between revisions of "How to protect the harddisk through APS"

From ThinkWiki
Jump to: navigation, search
m (Installing hdapsd)
m (Building an applet)
Line 142: Line 142:
  
 
=== Building an applet ===
 
=== Building an applet ===
 +
 +
{{Fedora}} users can try the instructions [[Installing_Fedora_Core_5_on_a_ThinkPad_X41_Tablet#Harddrive_Active_Protection_System_.28HDAPS.29|here]]
  
 
0.) Make sure you have installed hdaps [and loaded] and ?opengl?
 
0.) Make sure you have installed hdaps [and loaded] and ?opengl?

Revision as of 23:15, 6 April 2006

This page tells you how to make the Active Protection System work under Linux to protect your harddrive from damage in case of a notebook drop or other kind of impact while it is running.

How APS works in Linux

APS in Linux consists of four components on the software side:

The HDAPS driver exports a sysfs interface providing the acceleration values.

The hdaps_protect kernel patch exports a sysfs interface that enables an ide or sata disk to be protected by a userspace process.

The hdapsd userspace daemon monitors the acceleration values through the HDAPS interface and automatically initiates disk protection through the hdaps_protect interface - given that the movement exceeds a user specified threshold.

The optional KDE/GNOME applets provide a visual indication of the disk protection status and also a graphical interface for adjusting configuration options for hdapsd.

Installation

As mentioned above, the hdaps kernel driver found in recent kernels is only responsible for reading the accelerometer data and exporting it through the sysfs interface.

NOTE!
If you use tp_smapi, remember to include the option HDAPS=1 when installing tp_smapi.

In order to use this information to protect the disk, some additional steps are required.

  • Download and build the latest hdaps_protect disk protection kernel patches.
  • Enable the drivers in the kernel (requires kernel rebuild).
  • Download, build and configure the hdapsd userspace daemon.
  • Download and build one of the applets to get a real-time representation of the disk protection status.

Getting the files

The latest versions of hdaps_protect, hdapsd and the gnome-hdaps-applet are available at [1]..

khdapsmon can befound here.

Debian source and sid binary packages for hdapsd and the hdaps_protect patches (kernel-patch format) are available via APT access:

deb http://www.oakcourt.dyndns.org/debian/ ./
deb-src http://www.oakcourt.dyndns.org/debian/ ./

Fedora installation instructions are here

Patching the kernel and enabling the drivers

As root go to /usr/src/linux

# patch -p1 < ~/hdaps_protect.20060326.patch

make clean

make

make modules_install

Problem with unload capabilities check

After installation, you may get the following kernel message when the disk is protected (e.g., via # echo 1 > /sys/block/sda/queue/protect):

ata_scsi_issue_protect_fn(): unload support NOT reported..
scsi_protect_queue(): head park not requested, used standby!..

or

idedisk_issue_protect_fn(): unload support NOT reported..
ide_protect_queue(): head park not requested, used standby!..
ATTENTION!
Using HDAPS in the above state may cause frequent drive spin downs, thereby wearing out your hard disk.

If you see this, and you are sure that your drive actually does support unloading (all original drives sold with HDAPS-equipped ThinkPads do), then add the following patch on top of the above patch:

diff -u linux-2.6.15.hdaps/drivers/ide/ide-disk.c linux-2.6.15.hdaps/drivers/ide/ide-disk.c
--- linux-2.6.15.hdaps/drivers/ide/ide-disk.c	2006-01-18 07:11:54.000000000 +0000
+++ linux-2.6.15.hdaps/drivers/ide/ide-disk.c	2006-01-18 07:11:54.000000000 +0000
@@ -869,7 +869,7 @@
 	else
 		printk(KERN_DEBUG "idedisk_issue_protect_fn(): unload support NOT reported..\n");
 
-	return ide_protect_queue(q, (drive->id->cfsse & (1 << 13)) ? 1: 0);
+	return ide_protect_queue(q, 1);
 }
 
 int idedisk_issue_unprotect_fn(request_queue_t *q)
diff -u linux-2.6.15.hdaps/drivers/scsi/libata-scsi.c linux-2.6.15.hdaps/drivers/scsi/libata-scsi.c
--- linux-2.6.15.hdaps/drivers/scsi/libata-scsi.c	2006-01-18 07:15:31.000000000 +0000
+++ linux-2.6.15.hdaps/drivers/scsi/libata-scsi.c	2006-01-18 07:15:31.000000000 +0000
@@ -661,7 +661,7 @@
 		printk(KERN_DEBUG "ata_scsi_issue_protect_fn(): unload support NOT reported..\n");
 
 	/* call scsi_protect_queue, requesting either unload or standby */
-	return scsi_protect_queue(q, ata_id_has_unload(dev->id) ? 1 : 0);
+	return scsi_protect_queue(q, 1);
 }
 
 static int ata_scsi_issue_unprotect_fn(request_queue_t *q)

Drives on which the capabilities check patch is needed

  • Hitachi HTS726060M9AT00 (7K60) on ThinkPad T43

Installing hdapsd

Fedora users can try the instructions here

Gentoo users can try this ebuild: http://bugs.gentoo.org/show_bug.cgi?id=119845

For Gentoo: (works fine with IBM X41 25254CG)

0.) Add hdapsd support in your kernel, as far as I can remember: device drivers -> hardware monitoring -> ... (you need it as modul if you want to use tp_smapi and hdaps, see tp_smapi topic)

1.) Download the ebuild, use same ebuild date as the kernel-patch

2.) Makes known the portage an extern ebuild path and add the following line to /etc/make.conf:

PORTDIR_OVERLAY="/usr/local/portage/" (or any other location)

3.) Creates directory /usr/local/portage and /usr/local/portage/app-laptop/

4.) Copy downloaded ebuild to /usr/local/portage/app-laptop (/usr/local/portage/app-laptop/hdapsd should now exists)

5.) Makes portage known the new ebuild and creat digist with:

ebuild /usr/local/portage/app-laptop/hdapsd/hdapsd-20060326.ebuild digest

6.) Optional: Copy source file to portage distfiles (if no internet connection is available):

cp hdapsd-20060326.c /usr/portage/distfiles

7.) Accept the x86 keyword for this package: echo "app-laptop/hdapsd ~x86" >> /etc/portage/package.keywords

8.) Install hdapsd with: emerge hdapsd

9.) Edit the /etc/conf.d/hdapsd file (change your harddrive if neccessary: my is sda, and change the value from 5, 5 is to sensitive, 12 is a good value in my opinion)

10.) start deamon with: /etc/init.d/hdapsd start

11.) Optional: add to default runlevel: rc-update add hdapsd default, rc-update add hdapsd battery


Write me an e-mail (abartel[äd]htwm.de), if you want to get my hdapsd-20060326.ebuild and please upload it (It's illagal from work)

Building an applet

Fedora users can try the instructions here

0.) Make sure you have installed hdaps [and loaded] and ?opengl?

1.) Download hdaps-gl-0.0.5 from the www

2.) Extract files to /opt/hdaps-gl

3.) # make

4.) Start applett # ./hdaps-gl

Building khdapsmon

Where is Gentoo ebuild http://bugs.gentoo.org/show_bug.cgi?id=124175.

Building gnome-hdaps-applet

TODO
tell people what to do

Further Information

  • Additonal information and support is available through the hdaps-devel mailinglist and its archive.