Difference between revisions of "CardBus slot"

From ThinkWiki
Jump to: navigation, search
Line 7: Line 7:
 
* A Type III slot can accept a Type III, Type II or Type I card
 
* A Type III slot can accept a Type III, Type II or Type I card
 
* A Type II slot can accept a Type II or Type I card
 
* A Type II slot can accept a Type II or Type I card
 +
 +
Be aware however, that Thinkpads manufactured before ~1997-06 can NOT have Cardbus slots (v5.0+, 32-bit), and will have Compact Flash (v2.X, 16-bit) slots ([http://www.pcmcia.org/faq.htm#cardbusslot How can I tell if I have a CardBus slot?]); due to timing of the availability of the PCMCIA v5.0 standard.
 
</div>
 
</div>
 
|}
 
|}

Revision as of 19:56, 20 March 2007

The CardBus slot is a 32bit PC Card slot, that is NOT backwards compatible with the older 16-bit PCMCIA standard (How can I tell if I have a CardBus card?).

It exists in ThinkPads both as a Type II and Type III implementation. Type III is double the thickness of Type II, and most Type III implementations can accept two Type II cards.

  • A Type III slot can accept a Type III, Type II or Type I card
  • A Type II slot can accept a Type II or Type I card

Be aware however, that Thinkpads manufactured before ~1997-06 can NOT have Cardbus slots (v5.0+, 32-bit), and will have Compact Flash (v2.X, 16-bit) slots (How can I tell if I have a CardBus slot?); due to timing of the availability of the PCMCIA v5.0 standard.

Linux support

Cardbus adapters are handled by the Linux PCI subsystem as hotplug PCI adapters.

PCMCIA adapters where handled by the older Linux PCMCIA package, until the 2.6 kernel where PCMCIA hotplug is now directly supported.

Models featuring this Technology

(1) Type II slot

(1) Type III slot

(2) Type III slots

(2) Type II, or (1) Type III slot