Installing Ubuntu 6.10 on a ThinkPad T43 - Revision history

Jaskiern at 08:19, 1 March 2008

2008-03-01T08:19:46Z

Jaskiern at 21:57, 26 August 2007

2007-08-26T21:57:19Z

Tec: /* References */

2007-04-24T23:00:22Z

‎References

Tec: /* Forward / Backward Keys, Access IBM */

2007-04-24T22:56:27Z

‎Forward / Backward Keys, Access IBM

Whoopie: Undo corruption

2007-04-12T19:01:13Z

Undo corruption

DbdGz7 at 16:58, 12 April 2007

2007-04-12T16:58:49Z

Tec: /* Fingerprint Reader */

2007-03-03T13:12:41Z

‎Fingerprint Reader

Djanderson: fixed package name apt-get install build-essentials -> build-essential

2007-02-01T04:33:15Z

fixed package name apt-get install build-essentials -> build-essential

AndyB at 04:13, 29 January 2007

2007-01-29T04:13:48Z

New page

Installation Log of {{Ubuntu}} (Kubuntu) 6.10 on a {{T43}}

Disclaimer - Most of this article stolen from [[Installing_Ubuntu_6.06_on_a_ThinkPad_T43]]. WORK IN PROGRESS

__TOC__

==Overview==
Worked right out of the box
* 1400*1050 resolution
* Battery Management
* Ultra Nav (Trackpoint and synaptic touchpad) 3rd button scroll did not work
* WLAN (Atheros, IBM 11a/b/g Wireless LAN Mini PCI Adapter II)
* Hibernate and Standby
* Audio Keys
* ThinkLight

Was easy or required some work
* middle key of Ultra Nav (Trackpoint)
* ATI 3D Acceleration (Mobility Radeon X300)

Still TODO
* Beryl

Untested
* Bluetooth (light indicates working)
* Modem
* IrDA

==Installation==

===Recovery copy of data===

Before installing a new OS you should create a security copy of your old system. As the IBM Rescue and Recovery tool quit with an error message I used the Ubuntu live CD, mounted and cd'ed into my external hard drive and ran the following command:

$ cmduser|sudo dd if=/dev/sda1 | gzip | dd of=./sda1.img

where /dev/sda1 is the device with my windows partition and sda1.img the gzipped security copy.
In case of problems one can now restore lost information using

$ sudo dd if=./sda1.img | gzip -d | dd of=/dev/sda1

After creating the recovery copy we are ready to resize the existing windows partition. This article assumes you want to keep your IBM Rescue and Recovery Partition, shrink in size, but keep your windows partition and create a new partition for Dapper Drake.

===Resizing Partitions===

I used Partition Magic, but others have done the following...

Probably the best choice is now to boot from the alternate CD (read [http://gawrysiak.org/corvus/?p=4] to know why) and use it to resize the existing NTFS partition. Unfortionately in my case it didn't work. So I booted the Live CD, but gparted and parted refused to resize my Windows, too. If the same happens to you, use the example [http://crashrecovery.org/CrashRecoveryKit/iso/2.4.21/HOWTO.ntfs.html here] to know how to resize it "manually" using ntfsresize and fdisk.

After resizing your windows partition you should reboot window to check everything's in order. It probably will run checkdisk and reboot two times - according to experieces you can read in the web, you should better let windows do that.

===Installation of Ubuntu===

Now it's the time to install Ubuntu. I used the alternate CD for that because I chose to install grub into the Linux partition and not into the Master Boot Record ([http://gawrysiak.org/corvus/?p=4 read why]). The graphical LiveCD installer automatically installs grub to the MBR. If you want to use grub in the MBR read [[Rescue and Recovery]]. There is a description of what you have to do in order to still be able to use the IBM R'n'R partition.

* remember that you're installing GRUB to an '''sda''' mount, not an hda mount like the GRUB installer will prompt you for what you should enter after you tell GRUB not to install in the MBR will be something like this:

/dev/sda3

After the installation is finshed it will reboot your system. Now windows should start. In my case it didn't, but playing around, booting into the R'n'R partition, starting PC Doctor and doing some Diagnostics (no changes) somehow and surprisingly made windows boot again.

To boot you freshly installed Linux you have to reboot the LiveCD one last time. Use

$ sudo dd if=/dev/sda5 of=ubuntu.img bs=512 count=1

to copy the first block of grub into an image file and use e.g. an usb flash drive to transfer it to your newly booted windows. Copy paste the image to C:\ and add the following line to your C:\boot.ini:

C:\ubuntu.img="Ubuntu Dapper Drake"

At the next restart the windows boot manager should now welcome you with the choice to boot windows or ubuntu. Choose ubuntu to (finally ;-) boot your newly installed linux for the first time.

==Configuration==

===3D Acceleration and Xgl/Compiz===

If you have an ATI Radeon X300, use [http://wiki.cchtml.com/index.php/Ubuntu_Edgy_Installation_Guide this explanation] to make your hardware 3d acceleration work.

To test if it works type

$ glxinfo | grep rendering

The answer should be: "direct rendering: Yes". If it says "No", you don't have 3D acceleration.

If you have another card you might find a good explanation [http://ubuntuforums.org/showthread.php?t=148351 here].

===3D Acceleration using open-source radeon driver and AIGLX/Beryl===
From my experience it was better to use "radeon" driver, the open source one, on top of "drm" driver,
also part of the kernel, instead of fglrx. I get direct rendering and similar performance---maybe fglrx
driver gives 50-100 more fps. The most annoying thing about fglrx driver is that it can cause hard locks
every now and then and your suspend doesn't work properly...believe me I tried the ones that the Thinkwiki
says supposed to work.

$ glxinfo | grep rendering
direct rendering: Yes
OpenGL renderer string: Mesa DRI R300 20060815 TCL

Use the directions in the previous section to install fglrx driver, library. (I just installed them from shell
rather than making them into packages, I found the uninstall script in /usr/share/fglrx to work properly).
FYI, I used the version 8.26.18-x86.

If you don't get rendering use ''LIBGL_DEBUG=verbose glxinfo'' to diagnose the problem. The most common problem
is that xorg looks for DRI library files in ''/usr/X11R6/lib/dri'', which didn't exist for me. A simple way to
solve this is creating a symlink to where those files are located (/usr/lib/dri/):
$ cd /usr/X11R6/lib/
$ ln -s /usr/lib/dri/ .

Open your ''/etc/modules'' file and add these lines and comment 'fglrx' if there is any:
intel-agp
drm
radeon

Also, from my experience, it was better to use '''AIGLX''' than Xgl and '''Beryl''' instead of Compiz
in terms of performance and integration---things like suspend and hibernate. And you can use nice
start/shutdown scripts to disable beryl-manager since it can cause hang when you resume from suspension.
For more information about suspend/resume scripts, [http://ubuntuforums.org/showthread.php?p=1656484 here].
For more information about installing aiglx and beryl, see [http://wiki.beryl-project.org/index.php/Install/Ubuntu/Dapper/AiGLX here]).

ATI X300 is pretty pitiful though...I get around ~570 average FPS when running AIGLX/beryl
$ glxgears
2850 frames in 5.0 seconds = 569.997 FPS
2925 frames in 5.0 seconds = 584.925 FPS
2904 frames in 5.0 seconds = 580.741 FPS
2923 frames in 5.0 seconds = 584.524 FPS...
With metacity (default Gnome window manager) I get around slightly over 1000 FPS
$ glxgears
5073 frames in 5.0 seconds = 1014.423 FPS
5073 frames in 5.0 seconds = 1014.531 FPS
5252 frames in 5.0 seconds = 1049.326 FPS
5803 frames in 5.0 seconds = 1160.502 FPS...

I added the following options under ati Device section of ''/etc/X11/xorg.conf''
Option "EnablePageFlip" "True"
Option "ColorTiling" "True"
Then after that the performance boosted by quite a bit:
7026 frames in 5.0 seconds = 1405.147 FPS
7058 frames in 5.0 seconds = 1411.493 FPS
7062 frames in 5.0 seconds = 1412.393 FPS...

===Active Protection System===

See end of this chapter if you have ubuntu edgy eft.

The T43 has a great system to protect your hard disk, the Active Protection System APS. [[How to protect the harddisk through APS]] describes how you can use it.

{{WARN|Only follow these instructions if you know what you are doing!}}

If you didn't until now you will have to install make, libc, gcc, ... Best is you use

$ sudo apt-get install build-essentials

Determine your kernel version using

$ uname -a

You should see somthing like

Linux ibm 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686 GNU/Linux

Install the kernel sources "linux-source" e.g. using Synaptic.
Download the right kernel patch from [[HDAPS#Applications]] according to your kernel version and system (I chose "sata/ide disk protection patch for 2.6.15")
adapt following steps to your needs:

$ cd /usr/src/
$ sudo su
# bunzip2 linux-source-2.6.15.tar.bz2
# tar -xf linux-source-2.6.15.tar
# cd linux-source-2.6.15
# patch -p1 -l < /home/silvan/hdaps_protect.20060118.patch

You should see several lines with the word "suceeded". If you see many "failed" instead you probably chose the wrong patch for your kernel. You can use the --dry-run option to try it out first. If you get errors in the following steps you should better stop unless you know what you are doing.

# make clean
# make oldconfig # use old config, ask for new items, only
# make clean
# make # takes quite a long time, several minutes
# make modules
# make modules_install

Afterwards use the debian sources mentioned in [[How to protect the harddisk through APS]] to install the user space deamon hdapsd and the gnome applet gnome-hdaps-applet, e.g. using Synaptic.

If this worked for you, you can find some nice applications at [[HDAPS#Applications]] which make use of the APS.

{{HELP|For me unfortunately it didn't work as making the patched kernel failed. Please update ths section if you have different experiences and a better, more detailed working explanation.}}

{{NOTE|After I updated to edgy eft hdaps works without further work: edgy comes with hdaps built in. You can check if it is working by installing hdaps-utils

# sudo apt-get install hdaps-utils

and calling

# hdaps-gl

for a nice 3D show. If it is not, load the kernel module using

# sudo modprobe hdaps

and it should work. But if you want to use hdaps for disk protection, you have to recompile your kernel in edgy, too. Follow this post for an howto:

}}
[http://ubuntuforums.org/showthread.php?t=122863 Howto for edgy]

===Track Point Middle Key Scrolling===

In my case the track point worked out of the box, but the middle mouse button for scrolling did not. [[How to configure the TrackPoint]] explains how to solve this. The steps you need to follow are in section "Using the X server (kernel 2.6.11+)".
However you don't need to follow the steps in "EmulateWheelTimeout temporarily broken (-> fix for Ubuntu Dapper)" as this is fixed already if you have all your packages up-to-date.

Follow the instructions in the sections "Configure firefox for using trackpoint horizontal scrolling" and "Configure Opera for using trackpoint horizontal scrolling" as well, if you are using one of the two browsers.

===Fingerprint Reader===
{{Todo|Needs editing}}
Look at [[How to enable the fingerprint reader]] if you want to use your fingerprint reader.

===Forward / Backward Keys, Access IBM===
{{Todo|Needs editing}}
You'll find more here: [[How to get special keys to work]]

===IrDA===
{{Todo|Needs editing}}
Find information here: [[How to make use of IrDA]]

===VGA out ===
{{Todo|Needs editing}}
I didn't try it, but it looks easy: [http://help.nceas.ucsb.edu/index.php/Enable_vga_out_on_ATI_Thinkpads How to enable VGA out]

==References==
* [http://gawrysiak.org/corvus/?p=4 Dapper Drake on T42]

==External Sources==
* This guide is listed at the [http://tuxmobil.org/ibm.html TuxMobil Linux laptop and notebook installation survey (IBM/Lenovo)].

Hope this helped somehow :-)
tec

@@ Line 1: / Line 1: @@
 Installation Log of Kubuntu 6.10 on a {{T43}}
 __TOC__
@@ Line 271: / Line 269: @@
 ==References==
-* [[Installing_Ubuntu_6.06_on_a_ThinkPad_T43]]
+* [[Installing Ubuntu 6.06 on a ThinkPad T43]]
 * [http://gawrysiak.org/corvus/?p=4 Dapper Drake on T42]
 ==External Sources==

← Older revision		Revision as of 23:00, 24 April 2007
Line 271:		Line 271:

	==References==		==References==
		+	* [[Installing_Ubuntu_6.06_on_a_ThinkPad_T43]]
		+	* [[Installing_Ubuntu_7.04_on_a_ThinkPad_T43]]
	* [http://gawrysiak.org/corvus/?p=4 Dapper Drake on T42]		* [http://gawrysiak.org/corvus/?p=4 Dapper Drake on T42]

@@ Line 1: / Line 1: @@
-Installation Log of {{Ubuntu}} (Kubuntu) 6.10 on a {{T43}}
+Installation Log of Kubuntu 6.10 on a {{T43}}
 Disclaimer - Most of this article stolen from [[Installing_Ubuntu_6.06_on_a_ThinkPad_T43]]. WORK IN PROGRESS
@@ Line 280: / Line 280: @@
 Hope this helped somehow :-)
 tec

@@ Line 217: / Line 217: @@
 An alternative way can be found at [[Installing Ubuntu 6.06 on a ThinkPad T43#Fingerprint_Reader]].
-===Forward / Backward Keys, Access IBM===
+===Spezial keys ===
-{{Todo|Needs editing}}
-You'll find more here: [[How to get special keys to work]]
+If the following standard settings are not enough for you, you'll find more info here: [[How to get special keys to work]]
 ===IrDA===

@@ Line 205: / Line 205: @@
 ===Track Point Middle Key Scrolling===
-In my case the track point worked out of the box, but the middle mouse button for scrolling did not. [[How to configure the TrackPoint]] explains how to solve this. The steps you need to follow are in section "Using the X server (kernel 2.6.11 )".
+In my case the track point worked out of the box, but the middle mouse button for scrolling did not. [[How to configure the TrackPoint]] explains how to solve this. The steps you need to follow are in section "Using the X server (kernel 2.6.11+)".
 However you don't need to follow the steps in "EmulateWheelTimeout temporarily broken (-> fix for Ubuntu Dapper)" as this is fixed already if you have all your packages up-to-date.

@@ Line 149: / Line 149: @@
 If you didn't until now you will have to install make, libc, gcc, ... Best is you use
-  $ sudo apt-get install build-essentials
+  $ sudo apt-get install build-essential
 Determine your kernel version using