Installing LFS on a ThinkPad T41p - Revision history

Wehe: /* Power Management */ added external sources section

2006-10-24T07:41:25Z

‎Power Management: added external sources section

Wyrfel: /* Thinklight */

2006-01-03T09:34:36Z

‎Thinklight

Wyrfel: /* internal, AGP: ATI Radeon FireGL T2 */

2006-01-03T09:33:12Z

‎internal, AGP: ATI Radeon FireGL T2

Wyrfel at 23:37, 29 September 2005

2005-09-29T23:37:10Z

Wyrfel: /* Touchpad */

2005-09-29T22:52:52Z

‎Touchpad

Tonko: Reverted edit of 58.104.1.129, changed back to last version by 84.191.157.146

2005-09-08T15:12:52Z

Reverted edit of 58.104.1.129, changed back to last version by 84.191.157.146

58.104.1.129: /* DVD/CDRW Combo: Toshiba SD-R9012 */

2005-09-08T13:52:27Z

‎DVD/CDRW Combo: Toshiba SD-R9012

84.191.157.146 at 20:41, 23 July 2005

2005-07-23T20:41:20Z

84.191.157.146 at 20:37, 23 July 2005

2005-07-23T20:37:49Z

84.191.132.226: /* Thinklight */

2005-07-10T21:22:06Z

‎Thinklight

← Older revision		Revision as of 07:41, 24 October 2006
Line 89:		Line 89:
	See [[How to make use of Power Management features]].		See [[How to make use of Power Management features]].

		+	=External Sources=
		+	*This guide is listed at the [http://tuxmobil.org/ibm.html TuxMobil Linux laptop and notebook installation survey (IBM/Lenovo)].

	[[Category:T41p]] [[Category:LFS]]		[[Category:T41p]] [[Category:LFS]]

@@ Line 64: / Line 64: @@
 I didn't have success trying to enable hotplugging. Using [[ibm-acpi]] you can get events for the UltraBay eject lever, but i didn't manage to make hdparm unregister the IDE device. On my system it executes the command giving no error but afterwards the IDE device still shows up in {{path|/proc}}.
-===Thinklight===
+===ThinkLight===
 Works by pressing {{key|Fn}}{{key|PageUp}}, since it's controlled by the BIOS.<br>
 See [[ThinkLight | this page]] for further information.

@@ Line 5: / Line 5: @@
 ===internal, AGP: ATI Radeon FireGL T2===
-You have to choices: xorgs radeon driver or ATIs fglrx driver.
+You have two choices: xorgs radeon driver or ATIs [[fglrx|fglrx driver]].
-The xorg driver works fine, but doesn't support DRI. Also, support for a docks or port replicators DVI port is theoretically available, but practically not possible. This is being worked on.
+The xorg driver works fine, but doesn't support DRI. A solution is underway with the [[R300|R300 driver]]. Also, support for a docks or port replicators DVI port is theoretically available, but practically not possible. This is being worked on as well.
 ===PCI of dock: ATI Radeon 9000===

@@ Line 34: / Line 34: @@
 ==Sound: ...==
+{{Todo|needs to be filled}}
 ==Networking==

@@ Line 77: / Line 77: @@
 ===Touchpad===
-pending...
+{{Todo|needs to be filled}}
 ===Docking Station (IBM ThinkPad Full Dock II)===

@@ Line 28: / Line 28: @@
 The drive works pretty fine with the kernels standard IDE CD-ROM driver. You can burn CDs using cdrecord in ATAPI mode.
 Alternatively you may use ide-scsi and treat the device as a SCSI drive.
 ===Ultrabay 2000 ZIP Drive (in docks Ultrabay 2000)===

@@ Line 1: / Line 1: @@
 __TOC__
 ----
-===Graphics===
+==Graphics==
-====internal, AGP: ATI Radeon FireGL T2====
+===internal, AGP: ATI Radeon FireGL T2===
 You have to choices: xorgs radeon driver or ATIs fglrx driver.
 The xorg driver works fine, but doesn't support DRI. Also, support for a docks or port replicators DVI port is theoretically available, but practically not possible. This is being worked on.
-====PCI of dock: ATI Radeon 9000====
+===PCI of dock: ATI Radeon 9000===
 I made several attempts to get this card working under x.org, with no success, or very limited one.
@@ Line 16: / Line 16: @@
 I managed once to get the PCI card alone working after switching the primary display device to PCI in the BIOS.
-===Drives===
+==Drives==
-====Harddisk: Hitachi Travelstar HTS548080M9AT00====
+===Harddisk: Hitachi Travelstar HTS548080M9AT00===
 I replaced the original harddrive (60GB at 7260RPM) with the 80GB/5480RPM model from Hitachi (which are the ones that IBM labels for their purposes).
@@ Line 24: / Line 24: @@
 :{{cmdroot|hdparm -c 3 -u 1 -X 99 -k 1 /dev/hda}}
-====DVD/CDRW Combo: Toshiba SD-R9012====
+===DVD/CDRW Combo: Toshiba SD-R9012===
 The drive works pretty fine with the kernels standard IDE CD-ROM driver. You can burn CDs using cdrecord in ATAPI mode.
 Alternatively you may use ide-scsi and treat the device as a SCSI drive.
-====Ultrabay 2000 ZIP Drive (in docks Ultrabay 2000)====
+===Ultrabay 2000 ZIP Drive (in docks Ultrabay 2000)===
 Works great using the kernels ide-disk driver.
-===Sound: ...===
+==Sound: ...==
-coming soon...
+pending...
-===Networking===
+==Networking==
-====LAN: Intel Pro/1000 (82540EP)====
+===LAN: Intel Pro/1000 (82540EP)===
 Compile the e1000 driver into the kernel or as module (CONFIG_E1000).
 You might want to take a look at [[ifplugd]].
-====Wireless LAN: Atheros AR5212 802.11abg (aka IBM a/b/g)====
+===Wireless LAN: Atheros AR5212 802.11abg (aka IBM a/b/g)===
 The [[madwifi]] project will be your friend.
 You might want to give [[waproamd]] a try.
-====Modem====
+===Modem===
 never used
-===PCMCIA===
+==PCMCIA==
 Just enable the PCMCIA support in the kernel configuration and with it the cardbus driver and the thing will work great. A Xircom CardCaddy as well as some other CompactFlash adapter both worked.
-===USB===
+==USB==
 Enable the EHCI and UHCI drivers in your kernel config. You might need to unload them before suspending and reload them on resume if you use ACPI. This is a kernel issue and should be solved in latest kernels.
-===Specials===
+==Specials==
-====UltraBay====
+===UltraBay===
 I didn't have success trying to enable hotplugging. Using [[ibm-acpi]] you can get events for the UltraBay eject lever, but i didn't manage to make hdparm unregister the IDE device. On my system it executes the command giving no error but afterwards the IDE device still shows up in {{path|/proc}}.
-====Thinklight====
+===Thinklight===
 Works by pressing {{key|Fn}}{{key|PageUp}}, since it's controlled by the BIOS.<br>
 See [[ThinkLight | this page]] for further information.
-====special keys====
+===special keys===
 By using [[ibm-acpi]], [[tpb]] and xmodmap you can make use of all the specific special keys.<br />
 Have a look [[How to get special keys to work | here]] on how to configure them.
-====Trackpoint====
+===Trackpoint===
-The trackpoint is a PS/2 device. Look at [[trackpoint]] for a advanced settings/finetuning.
+The trackpoint is a PS/2 device. Look [[How to configure the TrackPoint|here]] for a advanced settings/finetuning.
-====Touchpad====
+===Touchpad===
-coming soon...
+pending...
-====Docking Station (IBM ThinkPad Full Dock II)====
+===Docking Station (IBM ThinkPad Full Dock II)===
 The thing works great.
 PCMCIA and all the ports were recognised by default.
@@ Line 85: / Line 85: @@
 Note that the interface will most likely be ide2 and ide3 then, so the docks UltraBay drive will be hde.
-===Power Management===
+==Power Management==
 The T41p is APM and ACPI capable.