ThinkWiki - User contributions [en]

Problems with ACPI suspend-to-ram

2007-04-01T08:42:06Z

Strohel: /* Troubles on resume */

The following glitches may or may not occur in relation to suspending to RAM:

==Troubles on suspend==
;Permissions:If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.

;Write error:If {{cmdroot|echo mem > /sys/power/state}} shows "write error: Operation not permitted", verify that CONFIG_HOTPLUG_CPU option is enabled in the kernel. [[Software_Suspend_2|Suspend2]] automatically selects this option.

;Broken sysfs interface:You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.

;Hangs on "switching to UP code":You may be using a [[How to make use of Dynamic Frequency Scaling|frequency scaling governor]] such as "conservative" or "ondemand", which sometimes have problems with suspending. Switching to a governor such as "powersave" or "performance" before suspending may solve this problem.

;MySQL daemon running:If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.

;LCD backlight remains on during sleep:When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.

;High power drain during sleep:Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].

;Built-in MMC reader:If you have an MMC reader, and the computer hangs when attempting suspend then remove sdhci, mmc_block, and mmc_core modules before suspending.

;Could not power down device <NULL>: error -22:If you have the acpi_cpufreq kernel module loaded, this prevents suspension.

==Troubles on resume==
;Blank display on resume:
:When resuming from a suspend-to-ram the display might remain black (on {{X60}}) or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). See [[Problem with display remaining black after resume]] for solutions. See also '''System hang on resume''' on this page - which may be potentially mismatched with this one.

;Garbage on text consoles on resume:When resuming from suspend-to-ram the text console displays may show garbage instead of actual text. The machine is otherwise still responsive and X displays fine. If all of this is true, then adding the kernel option {{bootparm|acpi_sleep|s3_bios,s3_mode}} in your menu.lst or lilo.conf may solve the problem.

;Broken hardware support after resume:
:*The '''serial port''' of the port replicator might not work after resume.
:*The '''parallel port''' might not work after resume. A possible fix is to unload and reload the parallel port drivers: {{cmdroot|rmmod lp parport_pc parport; modprobe lp}}.
:*Problems with the '''CD-RW/DVD drive''' after wake up from ram have been experienced.
:*There is a known Problem regarding '''battery info''' after suspend to RAM. A [http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html small patch] exists for kernels 2.6.14/2.6.15.
:*On {{X20}} and {{X21}} (and possibly other) models, the '''sleep LED''' is not reset properly on resume and will keep blinking. If you have the [[ibm-acpi]] kernel module loaded with the {{bootparm|ibm-acpi.experimental|1}} option, you can switch it off on resume by appending the following line to your suspend script: {{cmdroot|echo 7 off > /proc/acpi/ibm/led}}

;Crash on resume:
:*When using '''older ATI proprietary drivers''' a crash on resume can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. See the example suspend script [[Problem with display remaining black after resume#Solution for ThinkPads with Intel I830 Chipset]]. This is no longer necessary with recent revisions of the ATI proprietary driver.
:*A crash could also be caused by having '''apic support''' enabled in the kernel config. Try disabling it (in the "Processor type and features" section).
:*On machines with Savage chipsets, the '''savagefb framebuffer driver''' might crash the machine on resume. Make sure it is disabled in your kernel config and use the standard vesafb driver instead.
:*SATA-based laptops utilize the '''libata layer for disk access''' which does not have fully-working power-management support before Linux kernel 2.6.16 (ata_piix) and 2.6.19 (ahci). Suspend to RAM crashes these machines on resume. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|relevant section]] on the [[Problems with SATA and Linux]] page.
:*Using [[HDAPS]] as a module causes a crash on resume with the Linux kernel 2.6.19 (possibly even earlier versions). This was observed on a {{X41}}. Try unloading the module before suspending.

;System hang on resume:
:When system resumes it hangs right after restarting tasks. Strange thing is, that you may be even able to restart your ThinkPad using {{key|ctrl}}{{key|alt}}{{key|del}}, but if you try to blindly exec a command, it will not work, (eg. touch FILE) so it's not only the problem of videocard. This may be fixed by passing {{bootparm|ec_intr|0}} on kernel cmdline. Affected models: {{T21}} (at least [[2647-8AG]]).
:'''Note:''' ''this is resolved in kernel 2.6.20, there is no need to pass the {{bootparm|ec_intr|0}} bootparam anymore (moreover, you are discouraged to use it) See [http://bugzilla.kernel.org/show_bug.cgi?id=6749 revelant kernel bug report]''

;Shutdown on resume:
:If your system immediately begins to shut down right after resume, make sure you don't have acpid running with the power button tied to shutdown. The system is simply sensing the power button event and shutting down. This issue has been reported as a bug against the kernel ACPI subsystem, refer to [http://bugzilla.kernel.org/show_bug.cgi?id=6612 kernel.org bugzilla bug #6612].

;Immediate suspend on resume:
:When running GNOME, sometimes gnome-power-manager will put the system back into suspend immediately after resuming. This is caused by a known bug in HAL that causes some ACPI events to be reported incorrectly after a suspend-to-ram. A simple workaround can be found [http://live.gnome.org/GnomePowerManager/Faq?action=recall&rev=28#head-b8b1280115b0a51c2cc27b13a57121130ebf36cb here].
:Note that suspend being triggered by unrelated ACPI events such as disconnecting the AC adapter may also be fixed by the above method.

;Power Off when suspended laptop is docked
:When T60p is suspended, docking laptop into Advanced Dock immediately turns off laptop and crescent moon sleep indicator LED. Pressing power button initiates cold boot. Also reported by multiple people on thinkpads.com.

;SectorIdNotFound disk errors when laptop is resumed
:The errors look like this:
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=115896900, sector=115896900
: Oct 14 17:35:02 cacharro kernel: ide: failed opcode was: unknown

:This happens when you have [[Hidden Protected Area]] (HPA) enabled on the hard drive. There is a [http://bugzilla.kernel.org/show_bug.cgi?id=6840 kernel bug report with an unfinished patch] to fix this. This is not fixed as of kernel 2.16.18.

ExpressCard slot

2007-02-22T20:18:11Z

Strohel: fix wikipedia links, add separate link to ExpressCard

{| width="100%"
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
The [[ExpressCard]] slot is a [[PC Card]] slot, that is <b>not</b> backwards compatible with the 32-bit [[CardBus]] or 16-bit [[PCMCIA]] standard. On some models, this slot can be determined by an "X" on the blue eject button, differentiated from the concave "O" on the PC Card eject button.

There are 2 physical formfactors, ExpressCard/54 and ExpressCard/34. The numbers refer to the width of the ExpressCard in milimeters.<br>
Electronically ExpressCards can be implemented as either PCI-Express or USB.<br>

ExpressCard/54 slots can accept ExpressCard/34 cards, but not the other way around.<br>
</div>
[[Image:T43_expresscard_1.jpg|T43 ExpressCard Slot]]
|}
__NOTOC__
* [[Wikipedia:PC card|Wikipedia article on PC card (PCMCIA, CardBus)]]
* [[Wikipedia:ExpressCard|Wikipedia article on ExpressCard]]

=== Linux support ===
ExpressCard adapters are handled either by the Linux PCI subsystem as hotplug PCI-Express adapters, or by the USB subsystem (depending on the adapter card).

=== Models featuring this Technology ===
'''ExpressCard/54'''
* {{R51e}}, {{R52}}, {{R60}}
* {{T43}}, {{T43p}}, {{T60}}, {{T60p}}
* {{Z60m}}, {{Z61m}}
'''ExpressCard/34''' (using an adapter)
* {{X60}}, {{X60s}}

[[Category:Components]]

Category:T21

2006-11-29T16:54:24Z

Strohel: /* Standard Features */

{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== ThinkPad T21 ===
This page gives an overview of all ThinkPad T21 related topics.
==== Standard Features ====
* [[Intel Mobile Pentium III]] 850 MHz CPU
* One of the following video controllers:
** [[S3 Savage IX8]] with 8MB
* One of the following displays:
** 14.1" TFT display with 1400x1050 resolution
* 128 MB [[PC-100]] memory standard
* 32GB 2.5" HDD
* [[CS4297|CS4297A]] Audio controller
* [[UltraBay|UltraBay 2000]] with one of the following:
** DVD-ROM drive
* [[MiniPCI slot]] with one of the following:
** [[Intel 10/100 Ethernet Mini-PCI Adapter with 56K Modem]]
* (2) Type II [[CardBus slot|CardBus slots]]
</div>
|style="vertical-align:top" |
[[image:ThinkPadT20.jpg|ThinkPad T21]]
|}

* [ftp://ftp.software.ibm.com/pc/pccbbs/mobiles_pdf/62p9631.pdf T20, T21, T22, T23 - Hardware Maintenance Manual (April 2002)] (2,902,595 Bytes)
* [ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/c79lamst.pdf T20, T21 - User's Reference (March 2000)] (191,723 Bytes)
* [http://www.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4K4PWU Meaning of status indicators]
[[Category:T Series]]

Problems with ACPI suspend-to-ram

2006-11-29T16:23:17Z

Strohel: /* Troubles on resume */

The following glitches may or may not occur in relation to suspending to RAM:

==Troubles on suspend==
;Permissions:If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.

;Write error:If {{cmdroot|echo mem > /sys/power/state}} shows "write error: Operation not permitted", verify that CONFIG_HOTPLUG_CPU option is enabled in the kernel. [[Software_Suspend_2|Suspend2]] automatically selects this option.

;Broken sysfs interface:You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.

;Hangs on "switching to UP code":You may be using a [[How to make use of Dynamic Frequency Scaling|frequency scaling governor]] such as "conservative" or "ondemand", which sometimes have problems with suspending. Switching to a governor such as "powersave" or "performance" before suspending may solve this problem.

;MySQL daemon running:If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.

;LCD backlight remains on during sleep:When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.

;High power drain during sleep:Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].

;Built-in MMC reader:If you have an MMC reader, and the computer hangs when attempting suspend then remove sdhci, mmc_block, and mmc_core modules before suspending.

;Could not power down device <NULL>: error -22:If you have the acpi_cpufreq kernel module loaded, this prevents suspension.

==Troubles on resume==
;Blank display on resume:
:When resuming from a suspend-to-ram the display might remain black or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). See [[Problem with display remaining black after resume]] for solutions. See also '''System hang on resume''' on this page - which may be potentially mismatched with this one.
;Garbage on text consoles on resume:When resuming from suspend-to-ram the text console displays may show garbage instead of actual text. The machine is otherwise still responsive and X displays fine. If all of this is true, then adding the kernel option {{bootparm|acpi_sleep|s3_bios,s3_mode}} in your menu.lst or lilo.conf may solve the problem.
;Broken hardware support after resume:
:*The '''serial port''' of the port replicator might not work after resume.
:*The '''parallel port''' might not work after resume. A possible fix is to unload and reload the parallel port drivers: {{cmdroot|rmmod lp parport_pc parport; modprobe lp}}.
:*Problems with the '''CD-RW/DVD drive''' after wake up from ram have been experienced.
:*There is a known Problem regarding '''battery info''' after suspend to RAM. A [http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html small patch] exists for kernels 2.6.14/2.6.15.
:*On {{X20}} and {{X21}} (and possibly other) models, the '''sleep LED''' is not reset properly on resume and will keep blinking. If you have the [[ibm-acpi]] kernel module loaded with the {{bootparm|ibm-acpi.experimental|1}} option, you can switch it off on resume by appending the following line to your suspend script: {{cmdroot|echo 7 off > /proc/acpi/ibm/led}}
;Crash on resume:
:*When using '''older ATI proprietary drivers''' a crash on resume can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. See the example suspend script [[Problem with display remaining black after resume#Solution for ThinkPads with Intel I830 Chipset]]. This is no longer necessary with recent revisions of the ATI proprietary driver.
:*A crash could also be caused by having '''apic support''' enabled in the kernel config. Try disabling it (in the "Processor type and features" section).
:*On machines with Savage chipsets, the '''savagefb framebuffer driver''' might crash the machine on resume. Make sure it is disabled in your kernel config and use the standard vesafb driver instead.
:*Sonoma chipset based laptops ({{R52}}, {{T43}}, {{T43p}}, {{X41}}, {{X41T}}) utilize the '''SATA layer for disk access''' and SATA does not have power-management support yet. Suspend to RAM crashes these machines on resume. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|relevant section]] on the [[Problems with SATA and Linux]] page.
;System hang on resume:
:When system resumes it hangs right after restarting tasks. Strange thing is, that you may be even able to restart your ThinkPad using {{key|ctrl}}{{key|alt}}{{key|del}}, but if you try to blindly exec a command, it will not work, (eg. touch FILE) so it's not only the problem of videocard. This may be fixed by passing {{bootparm|ec_intr|0}} on kernel cmdline. Affected models: {{T21}} (at least [[2647-8AG]])
;Shutdown on resume:
:If your system immediately begins to shut down right after resume, make sure you don't have acpid running with the power button tied to shutdown. The system is simply sensing the power button event and shutting down. This issue has been reported as a bug against the kernel ACPI subsystem, refer to [http://bugzilla.kernel.org/show_bug.cgi?id=6612 kernel.org bugzilla bug #6612].

;Immediate suspend on resume:
:When running GNOME, sometimes gnome-power-manager will put the system back into suspend immediately after resuming. This is caused by a known bug in HAL that causes some ACPI events to be reported incorrectly after a suspend-to-ram. A simple workaround can be found [http://live.gnome.org/GnomePowerManager/Faq#head-b8b1280115b0a51c2cc27b13a57121130ebf36cb here].
:Note that suspend being triggered by unrelated ACPI events such as disconnecting the AC adapter may also be fixed by the above method.

;Power Off when suspended laptop is docked
:When T60p is suspended, docking laptop into Advanced Dock immediately turns off laptop and crescent moon sleep indicator LED. Pressing power button initiates cold boot. Also reported by multiple people on thinkpads.com.

;SectorIdNotFound disk errors when laptop is resumed
:The errors look like this:
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=115896900, sector=115896900
: Oct 14 17:35:02 cacharro kernel: ide: failed opcode was: unknown

:This happens when you have [[Hidden Protected Area]] (HPA) enabled on the hard drive. There is a [http://bugzilla.kernel.org/show_bug.cgi?id=6840 kernel bug report with an unfinished patch] to fix this. This is not fixed as of kernel 2.16.18.

Problems with ACPI suspend-to-ram

2006-11-29T16:22:01Z

Strohel: /* Troubles on resume */ minor cleanup

The following glitches may or may not occur in relation to suspending to RAM:

==Troubles on suspend==
;Permissions:If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.

;Write error:If {{cmdroot|echo mem > /sys/power/state}} shows "write error: Operation not permitted", verify that CONFIG_HOTPLUG_CPU option is enabled in the kernel. [[Software_Suspend_2|Suspend2]] automatically selects this option.

;Broken sysfs interface:You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.

;Hangs on "switching to UP code":You may be using a [[How to make use of Dynamic Frequency Scaling|frequency scaling governor]] such as "conservative" or "ondemand", which sometimes have problems with suspending. Switching to a governor such as "powersave" or "performance" before suspending may solve this problem.

;MySQL daemon running:If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.

;LCD backlight remains on during sleep:When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.

;High power drain during sleep:Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].

;Built-in MMC reader:If you have an MMC reader, and the computer hangs when attempting suspend then remove sdhci, mmc_block, and mmc_core modules before suspending.

;Could not power down device <NULL>: error -22:If you have the acpi_cpufreq kernel module loaded, this prevents suspension.

==Troubles on resume==
;Blank display on resume:
:When resuming from a suspend-to-ram the display might remain black or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). See [[Problem with display remaining black after resume]] for solutions. See also '''System hang on resume''' on this page - which may be potentially mismatched with this one.
;Garbage on text consoles on resume:When resuming from suspend-to-ram the text console displays may show garbage instead of actual text. The machine is otherwise still responsive and X displays fine. If all of this is true, then adding the kernel option {{bootparm|acpi_sleep|s3_bios,s3_mode}} in your menu.lst or lilo.conf may solve the problem.
;Broken hardware support after resume:
:*The '''serial port''' of the port replicator might not work after resume.
:*The '''parallel port''' might not work after resume. A possible fix is to unload and reload the parallel port drivers: {{cmdroot|rmmod lp parport_pc parport; modprobe lp}}.
:*Problems with the '''CD-RW/DVD drive''' after wake up from ram have been experienced.
:*There is a known Problem regarding '''battery info''' after suspend to RAM. A [http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html small patch] exists for kernels 2.6.14/2.6.15.
:*On {{X20}} and {{X21}} (and possibly other) models, the '''sleep LED''' is not reset properly on resume and will keep blinking. If you have the [[ibm-acpi]] kernel module loaded with the <tt>experimental=1</tt> option, you can switch it off on resume by appending the following line to your suspend script: {{cmdroot|echo 7 off > /proc/acpi/ibm/led}}
;Crash on resume:
:*When using '''older ATI proprietary drivers''' a crash on resume can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. See the example suspend script [[Problem with display remaining black after resume#Solution for ThinkPads with Intel I830 Chipset]]. This is no longer necessary with recent revisions of the ATI proprietary driver.
:*A crash could also be caused by having '''apic support''' enabled in the kernel config. Try disabling it (in the "Processor type and features" section).
:*On machines with Savage chipsets, the '''savagefb framebuffer driver''' might crash the machine on resume. Make sure it is disabled in your kernel config and use the standard vesafb driver instead.
:*Sonoma chipset based laptops ({{R52}}, {{T43}}, {{T43p}}, {{X41}}, {{X41T}}) utilize the '''SATA layer for disk access''' and SATA does not have power-management support yet. Suspend to RAM crashes these machines on resume. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|relevant section]] on the [[Problems with SATA and Linux]] page.
;System hang on resume:
:When system resumes it hangs right after restarting tasks. Strange thing is, that you may be even able to restart your ThinkPad using {{key|ctrl}}{{key|alt}}{{key|del}}, but if you try to blindly exec a command, it will not work, (eg. touch FILE) so it's not only the problem of videocard. This may be fixed by passing {{bootparm|ec_intr|0}} on kernel cmdline. Affected models: {{T21}} (at least [[2647-8AG]])
;Shutdown on resume:
:If your system immediately begins to shut down right after resume, make sure you don't have acpid running with the power button tied to shutdown. The system is simply sensing the power button event and shutting down. This issue has been reported as a bug against the kernel ACPI subsystem, refer to [http://bugzilla.kernel.org/show_bug.cgi?id=6612 kernel.org bugzilla bug #6612].

;Immediate suspend on resume:
:When running GNOME, sometimes gnome-power-manager will put the system back into suspend immediately after resuming. This is caused by a known bug in HAL that causes some ACPI events to be reported incorrectly after a suspend-to-ram. A simple workaround can be found [http://live.gnome.org/GnomePowerManager/Faq#head-b8b1280115b0a51c2cc27b13a57121130ebf36cb here].
:Note that suspend being triggered by unrelated ACPI events such as disconnecting the AC adapter may also be fixed by the above method.

;Power Off when suspended laptop is docked
:When T60p is suspended, docking laptop into Advanced Dock immediately turns off laptop and crescent moon sleep indicator LED. Pressing power button initiates cold boot. Also reported by multiple people on thinkpads.com.

;SectorIdNotFound disk errors when laptop is resumed
:The errors look like this:
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=115896900, sector=115896900
: Oct 14 17:35:02 cacharro kernel: ide: failed opcode was: unknown

:This happens when you have [[Hidden Protected Area]] (HPA) enabled on the hard drive. There is a [http://bugzilla.kernel.org/show_bug.cgi?id=6840 kernel bug report with an unfinished patch] to fix this. This is not fixed as of kernel 2.16.18.

Problems with ACPI suspend-to-ram

2006-11-29T15:59:16Z

Strohel: /* Troubles on resume */ -- comments on black display on resume

The following glitches may or may not occur in relation to suspending to RAM:

==Troubles on suspend==
;Permissions:If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.

;Write error:If {{cmdroot|echo mem > /sys/power/state}} shows "write error: Operation not permitted", verify that CONFIG_HOTPLUG_CPU option is enabled in the kernel. [[Software_Suspend_2|Suspend2]] automatically selects this option.

;Broken sysfs interface:You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.

;Hangs on "switching to UP code":You may be using a [[How to make use of Dynamic Frequency Scaling|frequency scaling governor]] such as "conservative" or "ondemand", which sometimes have problems with suspending. Switching to a governor such as "powersave" or "performance" before suspending may solve this problem.

;MySQL daemon running:If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.

;LCD backlight remains on during sleep:When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.

;High power drain during sleep:Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].

;Built-in MMC reader:If you have an MMC reader, and the computer hangs when attempting suspend then remove sdhci, mmc_block, and mmc_core modules before suspending.

;Could not power down device <NULL>: error -22:If you have the acpi_cpufreq kernel module loaded, this prevents suspension.

==Troubles on resume==
;Blank display on resume:
:When resuming from a suspend-to-ram the display might remain black or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). See [[Problem with display remaining black after resume]] for solutions. See also '''System hang on resume''' - which may be potentially mismatched with this one.
;Garbage on text consoles on resume:When resuming from suspend-to-ram the text console displays may show garbage instead of actual text. The machine is otherwise still responsive and X displays fine. If all of this is true, then adding the kernel option '''acpi_sleep=s3_bios,s3_mode''' in your menu.lst or lilo.conf may solve the problem.
;Broken hardware support after resume:
:*The '''serial port''' of the port replicator might not work after resume.
:*The '''parallel port''' might not work after resume. A possible fix is to unload and reload the parallel port drivers: {{cmdroot|rmmod lp parport_pc parport; modprobe lp}}.
:*Problems with the '''CD-RW/DVD drive''' after wake up from ram have been experienced.
:*There is a known Problem regarding '''battery info''' after suspend to RAM. A [http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html small patch] exists for kernels 2.6.14/2.6.15.
:*On {{X20}} and {{X21}} (and possibly other) models, the '''sleep LED''' is not reset properly on resume and will keep blinking. If you have the [[ibm-acpi]] kernel module loaded with the <tt>experimental=1</tt> option, you can switch it off on resume by appending the following line to your suspend script:
echo 7 off > /proc/acpi/ibm/led

;Crash on resume:
:*When using '''older ATI proprietary drivers''' a crash on resume can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. See the example suspend script [[Problem with display remaining black after resume#Solution for ThinkPads with Intel I830 Chipset]]. This is no longer necessary with recent revisions of the ATI proprietary driver.
:*A crash could also be caused by having '''apic support''' enabled in the kernel config. Try disabling it (in the "Processor type and features" section).
:*On machines with Savage chipsets, the '''savagefb framebuffer driver''' might crash the machine on resume. Make sure it is disabled in your kernel config and use the standard vesafb driver instead.
:*Sonoma chipset based laptops ({{R52}}, {{T43}}, {{T43p}}, {{X41}}, {{X41T}}) utilize the '''SATA layer for disk access''' and SATA does not have power-management support yet. Suspend to RAM crashes these machines on resume. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|relevant section]] on the [[Problems with SATA and Linux]] page.
;System hang on resume:
:*When system resumes it hangs right after restarting tasks. Strange thing is, that you may be even able to restart your ThinkPad using {{key|ctrl}}{{key|alt}}{{key|del}}, but if you try to blindly exec a command, it will not work, (eg. touch FILE) so it's not only the problem of videocard. This may be fixed by passing '''ec_intr=0''' on kernel cmdline. Affected models: {{T21}} (at least [[2647-8AG]])
;Shutdown on resume:
:If your system immediately begins to shut down right after resume, make sure you don't have acpid running with the power button tied to shutdown. The system is simply sensing the power button event and shutting down. This issue has been reported as a bug against the kernel ACPI subsystem, refer to [http://bugzilla.kernel.org/show_bug.cgi?id=6612 kernel.org bugzilla bug #6612].

;Immediate suspend on resume:
:When running GNOME, sometimes gnome-power-manager will put the system back into suspend immediately after resuming. This is caused by a known bug in HAL that causes some ACPI events to be reported incorrectly after a suspend-to-ram. A simple workaround can be found [http://live.gnome.org/GnomePowerManager/Faq#head-b8b1280115b0a51c2cc27b13a57121130ebf36cb here].
:Note that suspend being triggered by unrelated ACPI events such as disconnecting the AC adapter may also be fixed by the above method.

;Power Off when suspended laptop is docked
:When T60p is suspended, docking laptop into Advanced Dock immediately turns off laptop and crescent moon sleep indicator LED. Pressing power button initiates cold boot. Also reported by multiple people on thinkpads.com.

;SectorIdNotFound disk errors when laptop is resumed
:The errors look like this:
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=115896900, sector=115896900
: Oct 14 17:35:02 cacharro kernel: ide: failed opcode was: unknown

:This happens when you have [[Hidden Protected Area]] (HPA) enabled on the hard drive. There is a [http://bugzilla.kernel.org/show_bug.cgi?id=6840 kernel bug report with an unfinished patch] to fix this. This is not fixed as of kernel 2.16.18.

2647-8AG

2006-11-29T15:47:43Z

Strohel:

[[Category:T21]]

Problems with ACPI suspend-to-ram

2006-11-29T15:44:16Z

Strohel: /* Troubles on resume */ - system hang on resume details, affected models

The following glitches may or may not occur in relation to suspending to RAM:

==Troubles on suspend==
;Permissions:If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.

;Write error:If {{cmdroot|echo mem > /sys/power/state}} shows "write error: Operation not permitted", verify that CONFIG_HOTPLUG_CPU option is enabled in the kernel. [[Software_Suspend_2|Suspend2]] automatically selects this option.

;Broken sysfs interface:You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.

;Hangs on "switching to UP code":You may be using a [[How to make use of Dynamic Frequency Scaling|frequency scaling governor]] such as "conservative" or "ondemand", which sometimes have problems with suspending. Switching to a governor such as "powersave" or "performance" before suspending may solve this problem.

;MySQL daemon running:If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.

;LCD backlight remains on during sleep:When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.

;High power drain during sleep:Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].

;Built-in MMC reader:If you have an MMC reader, and the computer hangs when attempting suspend then remove sdhci, mmc_block, and mmc_core modules before suspending.

;Could not power down device <NULL>: error -22:If you have the acpi_cpufreq kernel module loaded, this prevents suspension.

==Troubles on resume==
;Blank display on resume:When resuming from a suspend-to-ram the display might remain black or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). See [[Problem with display remaining black after resume]] for solutions.
;Garbage on text consoles on resume:When resuming from suspend-to-ram the text console displays may show garbage instead of actual text. The machine is otherwise still responsive and X displays fine. If all of this is true, then adding the kernel option '''acpi_sleep=s3_bios,s3_mode''' in your menu.lst or lilo.conf may solve the problem.
;Broken hardware support after resume:
:*The '''serial port''' of the port replicator might not work after resume.
:*The '''parallel port''' might not work after resume. A possible fix is to unload and reload the parallel port drivers: {{cmdroot|rmmod lp parport_pc parport; modprobe lp}}.
:*Problems with the '''CD-RW/DVD drive''' after wake up from ram have been experienced.
:*There is a known Problem regarding '''battery info''' after suspend to RAM. A [http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html small patch] exists for kernels 2.6.14/2.6.15.
:*On {{X20}} and {{X21}} (and possibly other) models, the '''sleep LED''' is not reset properly on resume and will keep blinking. If you have the [[ibm-acpi]] kernel module loaded with the <tt>experimental=1</tt> option, you can switch it off on resume by appending the following line to your suspend script:
echo 7 off > /proc/acpi/ibm/led

;Crash on resume:
:*When using '''older ATI proprietary drivers''' a crash on resume can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. See the example suspend script [[Problem with display remaining black after resume#Solution for ThinkPads with Intel I830 Chipset]]. This is no longer necessary with recent revisions of the ATI proprietary driver.
:*A crash could also be caused by having '''apic support''' enabled in the kernel config. Try disabling it (in the "Processor type and features" section).
:*On machines with Savage chipsets, the '''savagefb framebuffer driver''' might crash the machine on resume. Make sure it is disabled in your kernel config and use the standard vesafb driver instead.
:*Sonoma chipset based laptops ({{R52}}, {{T43}}, {{T43p}}, {{X41}}, {{X41T}}) utilize the '''SATA layer for disk access''' and SATA does not have power-management support yet. Suspend to RAM crashes these machines on resume. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|relevant section]] on the [[Problems with SATA and Linux]] page.
;System hang on resume:
:*When system resumes it hangs right after restarting tasks. Strange thing is, that you may be even able to restart your ThinkPad using {{key|ctrl}}{{key|alt}}{{key|del}}, but if you try to blindly exec a command, it will not work, (eg. touch FILE) so it's not only the problem of videocard. This may be fixed by passing ''ec_intr=0'' on kernel cmdline. Affected models: {{T21}} (at least [[2647-8AG]])
;Shutdown on resume:
:If your system immediately begins to shut down right after resume, make sure you don't have acpid running with the power button tied to shutdown. The system is simply sensing the power button event and shutting down. This issue has been reported as a bug against the kernel ACPI subsystem, refer to [http://bugzilla.kernel.org/show_bug.cgi?id=6612 kernel.org bugzilla bug #6612].

;Immediate suspend on resume:
:When running GNOME, sometimes gnome-power-manager will put the system back into suspend immediately after resuming. This is caused by a known bug in HAL that causes some ACPI events to be reported incorrectly after a suspend-to-ram. A simple workaround can be found [http://live.gnome.org/GnomePowerManager/Faq#head-b8b1280115b0a51c2cc27b13a57121130ebf36cb here].
:Note that suspend being triggered by unrelated ACPI events such as disconnecting the AC adapter may also be fixed by the above method.

;Power Off when suspended laptop is docked
:When T60p is suspended, docking laptop into Advanced Dock immediately turns off laptop and crescent moon sleep indicator LED. Pressing power button initiates cold boot. Also reported by multiple people on thinkpads.com.

;SectorIdNotFound disk errors when laptop is resumed
:The errors look like this:
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
: Oct 14 17:35:02 cacharro kernel: hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=115896900, sector=115896900
: Oct 14 17:35:02 cacharro kernel: ide: failed opcode was: unknown

:This happens when you have [[Hidden Protected Area]] (HPA) enabled on the hard drive. There is a [http://bugzilla.kernel.org/show_bug.cgi?id=6840 kernel bug report with an unfinished patch] to fix this. This is not fixed as of kernel 2.16.18.

Talk:CS4297

2006-11-12T22:10:43Z

Strohel:

This chip does NOT seem to be in my x20; is it really supposed to be in there? [[User:Capybara|Capybara]] 04:08, 31 Oct 2005 (CET)
----
Run lspci, do you see an Intel AC'97 Audio Controller?
That is a generic interface to a AC'97 audio codec, in your case the CS4297A according to tawbook
--[[User:Tonko|Tonko]] 04:59, 1 Nov 2005 (CET)

== Problem using snd_intel8x0 instead of snd_cs46xx ==

I've T21. I'am using snd_cs46xx as a sound driver, but it has bad behaviour when doing hibernation. So i tried the intel8x0 driver, but it doesn't work! Does my ThinkPad have a different soundcard?
lspci:
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM Unknown device 0153
modprobe snd_intel8x0 works (i've rmmod'ed all sound related modules before), lsmod shows it and it's dependecies, but cat /proc/asound/cards shows no cards. dmesg says nothing about sound.
Do I need to load firmware, specify module params or so?
--[[User:Strohel|Strohel]] 18:59, 12 November 2006 (CET)

Talk:CS4297

2006-11-12T17:59:50Z

Strohel: Problem using snd_intel8x0 instead of snd_cs46xx

This chip does NOT seem to be in my x20; is it really supposed to be in there? [[User:Capybara|Capybara]] 04:08, 31 Oct 2005 (CET)
----
Run lspci, do you see an Intel AC'97 Audio Controller?

That is a generic interface to a AC'97 audio codec, in your case the CS4297A according to tawbook

--[[User:Tonko|Tonko]] 04:59, 1 Nov 2005 (CET)

== Problem using snd_intel8x0 instead of snd_cs46xx ==

I've T21. I'am using snd_cs46xx as a sound driver, but it has bad behaviour when doing hibernation. So i tried the intel8x0 driver, but it doesn't work! Does my ThinkPad have a different soundcard?
lspci:
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM Unknown device 0153
modprobe snd_intel8x0 works (i've rmmod'ed all sound related modules before), lsmod shows it and it's dependecies, but cat /proc/asound/cards shows no cards. dmesg says nothing about sound.
Do I need to load firmware, specify module params or so?
[[User:Strohel|Strohel]] 18:59, 12 November 2006 (CET)